Geekworm for Raspberry Pi 4, X857 V2.0 mSATA SSD Expansion Board + X735 V3.0 Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board (Not Include Raspberry Pi 4)
√[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
√X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
√Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
UPGRADE FROM THE UC35 - The UC35 V2.0 is fitted with a CREE XP-L HI V3 LED to reach a maximum output of 1000 lumens and 291 yards of throw - that's 60 lumens brighter and 73 yards more throw than the UC35!.
DURABLE STAINLESS STEEL SIDE SWITCH - Control on/off output via a tactical tail cap while a new durable stainless steel side switch lets you adjust through 5 brightness outputs plus Strobe including the new 1 lumen moonlight mode. This mode is very useful for reading up close and nearly doubles the max runtime!.
SHORTER BODY FOR EDC CARRY - Almost half an inch shorter in length than the original, the UC35 V2.0 is perfectly suited for everyday carry whether you're a mechanic, police officer or outdoor explorer..
BUILT-IN USB CHARGING - An included rechargeable li-ion battery and built-in USB charging port keep the UC35 V2.0 powered wherever you go. A boot up battery indicator lets you know how much power remains and charging indicator lights keep you informed throughout the charging process..
PACKAGE CONTENTS - Fenix UC35 V2.0 flashlight, pocket clip, USB charging cable, holster, lanyard, 2 spare o-rings, spare rubber boot, instruction manual, warranty card. Also includes Lumen Tactical battery organizer.
NorthPada Power Supply 5V 3A Cord AC Adapter Charger Compatible with Victrola Vintage Portable Suitcase Record Player VSC-550BT Vinyl Record Player Vintage Style 5.5 x 2.1mm
Brand: NorthPada, UL listed, Only Support 5V Victrola Vinyl Record Player VSC-550BT Series.
Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3A, Support DC 5V 2A and DC 5V 1A.
Cable Length: 6 Feet/180cm, DC 5.5mm x 2.1mm.
For 5V Victrola Vintage Portable Suitcase Record Player.
Geekworm X857 V2.0/X862 V2.0 Matching Metal Case X857-C3 + Power Switch + Cooling Fan Compatible with Raspberry Pi 4 Model B & X857 V2.0/X862 V2.0& X735/X708 Not Support X873
New version X857-C3 metal case with power control switch and super mute 4010 cooling fan for Raspberry Pi 4 Model B & X857 V2.0/X862 V2.0& X735(ASIN:....
X857-C3 case DO Not support X857 V1.2 / X862 V1.0 / X872 V1.1 and X873 V1.2(Produced after May 2021).
【User Manual】Refer to Geekworm WiKi search....
Supports X735 installation for intelligent power management and cooling your Raspberry Pi.
Supports X708 UPS and battery holder installation for UPS....
Case Size(Installation): 11.4cm x9.5cm x 5.5cm / 4.48inch x 3.74inch x 2.16inch.
Note: there is no switch port on X857 V2.0/X862 V2.0, the momentary power switch in the X875-C3 can only work with X735/X708..
NorthPada Power Supply DC 5V 1A Cord AC Adapter Charger for Victrola Vintage 3-Speed Bluetooth Portable Suitcase Record Player VSC-550BT Series 5.5 x 2.1mm
Brand: NorthPada, UL listed, Only Support 5V Victrola Vintage 3-Speed Bluetooth Portable Suitcase Record Player VSC-550BT Series.
Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 1A.
For 5V Victrola Vintage 3-Speed Bluetooth Portable Suitcase Record Player.
August EP650 Bluetooth Wireless Over Ear Headphones with aptX LL Low Latency/Multipoint/NFC / 3.5mm Audio in/Headset Microphone - Silver
BLUETOOTH CHIP CSR QUALCOMM APT-X LL LOW LATENCY - High Audio Quality - Stereo Bluetooth Headset for listening to wireless music from a mobile phone,....
BUILT-IN MIC & CONTROL BUTTONS - Music / volume / calls + hands-free kit function - Answer calls & control your audio tracks directly from the headset....
AUX IN JACK 3,5MM AND USB AUDIO - Use the Bluetooth headset also with non-Bluetooth devices thanks to the auxiliary jack when the battery is empty or....
MULTIPOINT TECHNOLOGY AND INTEGRATED 15H BATTERY - Connect 2 Devices at the same time and enjoy more than 15 Hours of autonomy, ideal for your....
CUSTOMISABLE SOUND - Use the dedicated Android or Apple AUGUST AUDIO EQ app to tune these BT headphones just the way you like, their premium driver....
Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY
...5.8G WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
√X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
√ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
√ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
√ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copyi....
DJI Phantom 4 Pro Plus V2.0 - Drone Quadcopter UAV with 20MP Camera 1" CMOS Sensor 4K H.265 Video 3-Axis Gimbal, Remote Controller with 5.5" Screen, White (CP.PT.00000234.01)
The Phantom 4 Pro+ V2.0 camera drone comes equipped with a 3-axis motorized gimbal and a 1-inch 20MP CMOS sensor with a mechanical shutter that eliminates rolling shutter distortion..
With the 5.5-inch 1080p LCD screen built into the optional remote controller, your images are easily visible even in direct sunlight..
The Phantom 4 Pro V2.0 is a beast when it comes to flight performance. It has a maximum flight speed of 72 kph and an 8km transmission range with 1080p livestreaming and automatic frequency switching thanks to OcuSync 2.0..
The Phantom 4 Pro V2.0 offers Intelligent Flight Modes such as TapFly, ActiveTrack, Draw mode, Gesture mode, and more. Draw lets you control the flight path with a fixed altitude simply by creating a route on the screen..
What you get: DJI Phantom 4 Pro+ V2.0, Remote Controller with 5.5" Screen, Intelligent Flight, Battery, Charger, Power Cable, 4x Propellers (pair), Gimbal Clamp, microSD Card (32GB), Micro USB Cable, Carrying Case.
