ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter
[Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
[Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
[Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
Use lubricant fluid for added ease (not included).
[Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
Pulls CV joints on 1986-current Taurus/Sable.
[Built to Last] Hardened hammer shaft provides strength and d....
OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use
NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece
Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
This is a must have for anyone servicing vehicles.
CARTMAN Wiper Arm Battery Terminal Bearing Remover Puller Tool
Repair tool can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline.
Great multi-function small repair tool designed for professional use.
Battery terminal puller overall forged by carbon steel is durable and exquisite appearance. It can easily remove stuck battery terminal,also remove bolt on windshield wiper arms that fit over a tapered spline.
Sturdy, Durable & Long Time Service -- This Battery Bearing Extractor Puller is made of strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
Easy to Operate & Quality Assurance: Jaw opening 6-28 mm for wiper arms with an o/d up to 42 mm.
With our battery bearing puller you can get a great helper to handle with difficult tasks.
Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts
[No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
[3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
[Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
[Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
railway vehicle, factory machinery and mining equipment maintenance, etc..
[One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit
Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
Versatile: For a wide variety of pulling jobs.
Can remove bearings from a shaft, split bearings, and separate flywheels.
Can be used separately or with other pullers or tools.
Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
Black oxide finish for corrosion resistance.
Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler
...including GM, Ford, Chrysler, imports, and other makes and models.
Check vehicle owner’s manual for a list of compatible compressors.
EASY TO USE: Keep all threads clean and well-oiled.
Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
Resists rust and corrosion with proper care and lubrication.
2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
