6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump
Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
Easy to Operate: The pneumatic way for higher speed of oil change.
just need to connect with air compressor. Easy to do the oil / fluid changing for....
Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....
RULLINE Oil Catch can kit,air Oil Separator,Oil Catch Can Tank Universal Reservoir with Breather Hose Kit Aluminum Polish Baffled 350ml Black
★[ Capture Oil & Keep Engine Clean ]-- The oil catch tank will catch the oil and moisture from PCV/CCV air, prevent carbon and sludge build-up in....
★[350ML Capacity & Universal ]-- The capacity is 350ml,enough for daily use.Universal for most cars and small parts of motorcycles..
★[ Come with Oil Dipstick ] -- It is convenient to check the fluid level in catch can by oil dipstick without opening it frequently.
★[ Superior Quality ] -- Made of high quality 0046 aluminum for added strength and durability, fully tig welded, lightweight and corrosion resistant.
★[ 2 Types Of Installation ]-- Easy to install oil tank with breather filter as a vent system or without breather filter as a seal can, all for your....
Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)
【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills
【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool
【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid
Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer
...echnology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4' Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black
...echnology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.