ATLIN 36mm Oil Filter Socket - Fits Some Ford F250, BMW, Mini, Volvo, Audi, VW, Porsche Vehicles
Compatibility – This low profile oil filter socket is designed to fit vehicles equipped with a cartridge style oil filter housing. Compatible vehicles Include: Ford F250 6.0, F250 6.4, various BMW, Mini, Volvo, Audi, VW, Porsche vehicles. Also can function as a fuel filter socket, compatible with some Duramax engines.
Low Profile For Confined Spaces – Fuel filter and oil filter caps are often located in areas with little clearance. Designed with a height of just 1.25”, the ATLIN oil filter wrench effortlessly reaches oil filter cartridges on even the most compact of vehicles.
Superior Design – The 6-point hex features rounded corners to prevent rounding-off the filter canister. This design allows the 36mm wrench to grip the filter cartridge tightly with the 6 flat sides instead of the corners, preventing binding and resulting in a more secure fit.
Built To Last – The ATLIN oil filter cap wrench is crafted from solid chrome-vanadium (CR-V) steel. This 36mm oil filter socket will not yield under high torque applications like a cheaper cast aluminum 36mm socket.
AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing
APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
OTC 4568 2-1/2 to 5-1/4 3-Prong Self-Adjusting Oil Filter Remover
OTC's 3-prong self-adjusting oil filter wrench features 3 arms that adjust to fit a wide range of filter sizes, making this a very flexible tool for....
Knurled legs provide extra gripping power.
rotation of the tool adjusts the the legs tightly against the filter.
Fits filters ranging from 2-1/2 inches to 5-1/4 inches (65 mm to 135 mm) in diameter.
To turn the tool use a 1/2 inch drive ratchet in the ratchet drive or a 13/16 inch wrench or socket on the nut.
JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV
ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
Air Compressor Water Separator, Heavy Duty Air Compressor Filter provides Clean Dry Air. Compressed Air Dryer with Drain Valve by LE LEMATEC
Le Lematec air compressor filter oil and water separator works with any air compressor and air tool. The air filter traps dirt oil and moisture as a receiving filter for air tools..
Keep air tools in tip top working condition and prevent costly repairs by preventing dirt and moisture from damaging your air tools and accessories.
LE Lematec air dryer is a heavy duty inline air filter. Made from aluminum with solid brass fittings, it offers excellent reliability. Features a 1/4 inch air inlet female and 1/4 male..
Air compressor dryer provides quick and easy cleaning with its push button drain valve. Just push the button to eject oil dirt and water from the filter..
The inline air filter works under standard operating pressure of 90 PSI up to 150 PSI maximum..
Stove Burner Cover Double-Thick Reusable Non-Stick Heat-Resistant Gas Stove Protector Cuttable Stove Burner Lining For Kitchen Black
Great Values for money: a practical household tool that prevents oil from spilling on the surface of your stove. Stove burner covering black can....
Keep your stove and kitchen clean: This reusable stove lining is coated with PTFE, so it is easy to wipe off dripping sauce, burnt food, greasy oil,....
Cuttable: durable and cuttable. You can use it for a long time..
Easy and fast cleaning: Our stove cover can perfectly absorb splashes and spills on the stove top and is very easy to wipe off. Keep your stove and....
Size:27x27cm10.6x10.6in with pre-cut inner ring, which can be easily cut. Three thicknesses: 0.13mm/0.2mm/0.3mm.
[Keep Field Equipment Handy]: The Felled Chainsaw Bag 14 to 18 Inch Case with Hand Chainsaw Sharpener Kit Accessories allows you to bring along all tools while in the field.
Bag compartment prevents oil from getting on your sled so you can cut trees off trails and more in the woods.
[Carry a Single Bag]: Double-stitched polyester chainsaw carry case is water and abrasion-resistant.
2 nylon handles and 1 adjustable nylon shoulder strap.
End-to-end zipper and 1 main compartment with room for extra oil, off-roading tools, and spare chain.
Chainsaw sharpening tools inner pouch bag for easy access to included tools.
[Store Your Chainsaw]: 35 x 6 x 11-inch (89 x 15 x 28 cm) overall chain saw case size holds 14, 16, or 18-inch (35, 40, 45 cm) gas-powered saws and battery-powered saws without battery installed.
[Use Easily]: Chainsaw file kit includes double-handled frame guides so you can steadily apply level, even pressure to prevent bending or breaking.
Chainsaw depth gauge tool and flat file make it easy to maintain proper cutter tooth height while screwdriver wrench allows for proper chain tension.
[Package Contents]: Chainsaw box case with chainsaw sharpening tool set includes 3 round saw files 5/32 (4.0mm), 3/16 (4.8mm), 7/32-inch (5.5mm), 3 double-handle....
URO Parts 24118612901PRM Transmission Oil Pan & Filter Kit, Aluminum Construction with Replaceable Filter, Bolts not Included
FIT - This transmission filter service kit is for Land Rover LR3 (2005-2009), LR4 (2010-2013), Range Rover Full Size/Full Size Supercharged (2006-2012) and Range Rover Sport/Sport Supercharged (2006-2013).
PRO TIP -Worn transmission fluid leads to judder, noise and a deterioration in gear change quality. ZF recommends oil and filter changes after 50,000 to 75,000 miles on all 5, 6 & 8 speed automatic gearboxes, to ensure optimum performance.
REPLACeMENT -Once the fluid has been drained from the transmission, simply remove the bolts from the old unit and cut the old plastic sumps filter tube with a hacksaw. Slide the old sump out and remove the other end of the sawn-off filter tube. The new separate filter can then be fitted and the new sump pan slides into place and is bolted up with the new gasket supplied.
CONVENIENCE - Get everything you need rather than spending more time and money getting each part separately.
OE REPLACEMENTS - This kit replaces OE part numbersDA2142, LR007474, LRN13754, G055005A2, 83222305396 and TZV500010.
