Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel
SIZE- Length 24 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
It has good air tightness, durability, rust and corrosion resistance..
COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
3Pcs 4 inches Two Hole stainless steel U-shaped pipe card for Pipe, Greenhouse AssemblyFixing on Various Surfaces and Support Structures
Package included：3Pcs U-shaped pipe card.
Material：These Rigid Pipe Straps are made of good quality stainless steel, sturdy and durable ,anti rust and corrosion.
Easy to install：These u shape clamps are strong enough to hold your pipe or rod securely. Only need to cooperate with screws can be installed, convenient and fast. Mounting screws are not included here!.
Wide Application： Our u brackets could be used in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
Our Advantage：These u shape clamps are strong enough to hold your pipe or rod securely. And they won't oxidize even exposed to harsh environment for a long time. So that you could use them without any worry..
316 Stainless Steel Compression Tube Fitting Union Straight Adapter Tube Double Ferrule Pipe Fitting Adapter for Pipe 2Pcs Ф1/2
【316 Stainless Steel】 The double ferrule pipe fitting adapter adopt high-quality stainless steel 316 material,the inspection indicators are in line with the standard guaranteed spectrometer..
【Good peformance without welding】The product has simple and firm connection, good sealing, no need for welding, high pressure resistance and vibration resistance..
【Easy to clean】The surface of the joint is finely polished by a special process, the hand feels good and delicate, and the interior is clean and bright..
【Suitable for complicated pipeline connections】Suitable for some complicated pipeline connections that cannot be welded, and can pass through gas, liquid, oil and general corrosion pipeline systems..
【Comply with national standard】 The double ferrule straight‑through joint is a relatively common national standard joint, which serves as a connection between steel pipes..
EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black
Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator
[Function]: ATIMA Dual Fuel System Extender Kit can power two generators simultaneously. It is very easy & convenient to use. Just connect the pipes, combo kit gas cap tube and attach them to a Honda Generator or any other compatible generators. The generator then can intake the fuel from the external tank and it can extend the operation time..
[Composition]: This kit includes one long fuel pipe with automatic lock.
two short fuel pipes connected to the fuel tank cap and two fuel tank caps. The tight fitting of the fuel pipe prevents oil leakage..
[Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
[Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
[Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the f....
Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal
20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
No Worry To Buy: Excellently Sealed, no leaking. We of....
