Best Oil Hose Buyer

Koehler Enterprises KEDIS220 220 Piece Hose Clamp Set in Mountable Rack , Red

  • Wide Applicability : Hose finisher clamp is apply to the flexible hose tube. This is not only a hose clamp, but also a hose connector..
  • Repeatable Use : There is a captive screw on the hose clamp, you can disassemble and install it easily, and can also be reused..
  • Suitable for fuel hose, oil hose, diesel hose, water hose and so on, perfect to apply in automotive..
  • Hex hose finisher can be reused and recycle if you do not want them to stay in the original place..
  • Package Included: 4 x Car Hose Finisher Clamp Adapter.
Check Stock

2nd Gen TERAPUMP Turkey Fryer Deep Fry Cooking Vegetable Oil Filter Transfer Reuse Recycle Pump

  • 70% longer 29″ discharge hose and hose clip will help you transfer the oil quickly without mess and save the oil.
  • *UPGRADED* Depends on oil type & temperature 60-100% MORE POWERFUL (1 GPM) than 1st Generation.
  • Battery Powered Pump: *Two D-Size Batteries required* NOT INCLUDED.
  • Quickly and easily transfers oil (NOT HOT OIL) from container to receptacle / 29-2/5″ x 2-4/5″ x 2-4/5″ – Approximate Measurements.
  • Filter will ensure that no food particles will be transferred, the oil that remains will be filtered and much more clean.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ...e. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover protected 3-1/2" large dial. 0-500psi and 0-35bar big scale range, is more suitable for testing big engine. No pressure holding function, return to zero automatically. The 40" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter. Max working pressure: 500psi.
  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR engine transmission oil pressure test gauge tool kit. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours..
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

DasMarine 12V 60W Oil Change Pump Extractor Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV

  • 【Specificaiton】: Input Voltage: DC 12V.
  • Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min.
  • 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery....
  • 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle,....
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel,....
Check Stock

Purple Emu AEA Certified Fully Refined Pure Emu Oil 8oz. Bottle

  • ETHICALLY SOURCED: Emu Joy emu oil comes exclusively from a family run farm where the emus are raised humanely, fed a custom blend of organic grains with fresh clean water, and have plenty of room to run around..
  • HIGHEST QUALITY EMU OIL: Fully refined and AEA Certified to ensure you are applying the purest possible emu oil to your skin. Every bottle is identified with a lot number and bottling date that guarantees quality and freshness. So pure it’s certified as Food Grade..
  • BUYER ALERT: Some brands combine oil from different farms, or even countries, that have far less strict standards, or they dilute it with cheap vegetable oil to bring the cost down. Emu Joy is 100% pure emu oil only..
  • PENETRATES INTO ALL 7 LAYERS OF THE SKIN to heal from within. Emu oil’s composition is so similar to human skin oil that it can absorb deeper and better than plant oils. Emu Joy emu oil is exceptionally high in essential fatty acids, the compounds that make emu oil so beneficial..
  • NATURE’S BEST MULTITASKER. Use it as a skin moisturizer, irritated skin soother, wound healer, dry hair conditioner, pets’ hot spot and chapped paws treatment and more..
Check Stock

Crankcase Ventilation Valve Oil Separator Hose Compatible with BMW E46 E60 E39 X3 X5 320i, 323i, 325, 325i 328i, 330i, 525i, 528i CCV PCV Valve Ventilation Separator 5 Piece Value Kit 11611432559

  • 【PCV CCV Exhaust Hose For BMW Replacement】Since the whole point of positive crankcase ventilation is to keep these gases out of the crankcase, the PCV valve is designed to close off when this happens and block the back flow of gases. If the PCV valve hose is broken, the gas will not be transferred back into the engine, which will reduce your engine efficiency, increase harmful gas emissions and the probability of engine failure..
  • 【Fit The Following Vehicles】This E46 PCV Valve hose kit is a direct replacement for the original vent hoses and PCV valves on a variety of vehicles. This includes most 3 series and 5 series models from 1997-2005. SEE THE FULL LIST ON THE PRODUCT DESCRIPTION PAGE BELOW..
  • 【Replace Part Numbers】This X3 X5 CCV hose kit can replace 11617504536 / 11617501566 / 11611432559 / 11157532649 which are commonly found on popular BMW model including BMW E46 3 series E39 E60 X3 X5..
  • 【OEM Quality & Direct Fit】Manufactured with high temperature plastic materials & advanced technology, meets OEM standard. Even though this is not a genuine BMW PCV crankcase ventilation oil separator hose, but it works even better and lasts longer. Save your time and fund by replacing the PCV crankcase ventilation oil separator hose yourself..
Check Stock

muge racing Universal Oil Catch Can Tank Kit Polish Baffled Reservoir with Breather Filter with 3/8' Fuel Line,Aluminum,Red,400ml

  • ...m the crankcase,Reduce the amount of steam entering the intake branch,Reduce the probability of secondary combustion,Reduce carbon deposition..
  • √ UPGRADE STRUCTURE - The baffle could cool hot oil vapor and turn into liquid and catching the oil and moisture oil vapor, keeps engine clean and prolongs engine life.The hose clamp reinforcement to prevent the hose from falling off. Three different sizes of adapters can fit for different size hose and come with o-ring gasket to prevent oil leakage. Built in dipstick to check fluid level without opening it frequently,You could use the breather filter as a vented..
  • √ 2 TYPES OF INSTALLATION - Easy to install oil catch can with breather filter as a vent system or without breather filter as a seal can, all for your option..
Check Stock

Swpeet 84Pcs 10 Sizes Zinc Plated Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Agriculture, Plant & Construction

  • It is used as a car hose separator clamp fuel line mounting divider hose fitting adapter..
  • Made of aluminum alloy, rust proof, anti corrosion, waterproof, oil proof, durable in use..
  • Detail Size: 50x23x12mm / 1.97"x0.91"x0.47"(L*W*H).
  • Easy to install and convenient to use. Universal fit for AN8 gas/water/oil/fuel brake hose..
  • Package Include: 4 Pcs x AN8 Hose Separator Clamps..
Check Stock

ATPTOOL12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transf

  • 【Specificaiton】: Input Voltage: DC 12V.
  • Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min.
  • 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).
Check Stock