Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V/60Hz thermally protected motor, 4 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4 inch and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Scuba Tank with Hand Pump Mini Scuba Tank Support 15-20 Mins Underwater Breathing No More Than 30m Scuba Equipment Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source Green
...ronment of 16 ft underwater and 50°F, the diving time is different from person to person). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft).(For uncertified diver, please check in advance if your local dive shop can inflate for you).
✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
equipped with air switch, which can be turned off when not use to avoid air leak.
equipped with pressure gauge to see the real-time pressure.
the release valve is equipped in the breath valve, can easily release pressure..
✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
The scuba tank will be split into three parts in the package: bottle body, regulator, and breathing valve, you need to assemble it by yourself before inflatio....
Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V - 60Hz thermally protected motor, 10 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Scuba Tank with Hand Pump Mini Scuba Tank Support 15-20 Mins Underwater Breathing(No More Than 30m) Scuba Equipment Diving Oxygen Tanks for Water Rescue/Diving Sightseeing/Backup Air Source, Black
...nt of 16 ft underwater and 50°F, the diving time is different from person to person). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft).(For uncertified diver, please check in advance if your local dive shop can inflate for you).
✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety.
equipped with air switch, which can be turned off when not use to avoid air leak.
equipped with pressure gauge to see the real-time pressure.
the release valve is equipped in the breath valve, can easily release pressure..
✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment.
equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater.
The scuba tank will be split into three parts in the package: bottle b....
Homemade Perfume: Create Exquisite, Naturally Scented Products to Fill Your Life with Botanical Aromas
【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
OYEAUTO 6.0 IPR Valve Injector Pressure Regulator & ICP Control Sensor with Pigtail 5C3Z-9C968CA CM-5126 Compatible with Ford 03-10 6.0L Powerstroke Diesel Excursion F250 F350 F450 E350 E450
A Powerstroke engine utilizes an electromagnetic valve to regulate the high pressure oil pressure on the engine to tailor the injection characteristics of the injectors. This valve is called the Injection Pressure Regulator or IPR..
The IPR is located on the back of the high pressure oil pump, which is located UNDER the fuel filter assembly,down in the V of the engine.An IPR consists of two main parts: a pilot operated valve and an electromagnetic actuator..
Fitment:Compatible with Ford 2005 E-350 Club Wagon,2005-2010 E-350 Super Duty,2005 Ford Excursion,2005-2007 F-250 Super Duty,2005-2007 F-350 Super Duty.please check the year make model to make sure the IPR fit your car..
Replaces Part Numbers:5C3Z9C968CA,1846057C1,AP63417,CM-5126,5C3Z-9C968CA,CM5126..
Direct replacement part,IPR valve already comes with the new filter and o-rings installed..
250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Air Over Hydraulic Pump (Single Acting) Green - with Hose
BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Tektall 2 Pack 10mm 3/8" Aluminum Alloy Non-Return One Way Check Valve for Fuel Line Oil Petrol Diesel,with 4Pcs Universal Adjustable Hose Clamps.
【What is Fuel Non Return One Way Check Valve?】 The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel from returning back to the tank and keeps it in the line.So this one way valve can perfectly solve your vehicle's hard or slow startup issues..
【Good Quality】 Tektall non return check valve is made of high-quality aluminum alloy, the life is longer than plastic oil valve, and this check valve is more durable and corrosion-resistant strong..
【Easy to Replace】 According to the little arrow on the valve, connect the fuel line.Then using the hose clapms and screwdriver to ensure the pipes don't drop off and keep tightly. This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient..
【Wide Applications】 This one-way check valve is installed in many low pressure fuel systems / diesel / Carburetors and bio fuel systems where fuel to only flow one way, suitable for petrol, diesel, water, oil. It universal can be used on any UTV, quad, dirtbike, jetski, waverunner, boat, truck, car, motorcycle, tractor, camper, lawn mower, blower, pressure washer, etc..
