Best Oil Pump Install Tool

DeWalt DXCMV5076055 60 gallon 5 hp Two Stage Air Compressor

  • Industrial performance delivers maximum CFM @ 175 PSI.
  • provides enough power to operate more than one air tool or Device at one time.
  • Patented Pump design provides for a cooler Running Pump: industrial style air intake filter.
  • easily Accessible Oil level sight glass and Oil drain with 4” extension.
  • Electric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required.
  • Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps.
  • Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling.
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

HGV Tools / Compatible with John Deere Timing PIN alt JDG1559

  • Before installing injection pump on engine, install JDG1559 injection Pump Timing Pin into pump , timing pin bore..
  • nstall a small punch or screwdriver into hole in pump drive shaft and turn shaft until timing pin drops into recess in injection pump drive shaft.
  • Use for static lock pin timing during installation of the injection pump..
Check Stock

LYCARESUN 15 to 55 Gallon Drum Pump, Aluminum Barrel Pump Hand Liquid Transfer, Hand Siphon Barrel Pump, Hand Drum Pump for Gasoline Oil Fuel Diesel, Kerosene, Hydraulic Fluid

  • Adjustable Drum Pump: It consists of 3 segmented suction tubes, the total height of the pump is 51 inch, easy to adjust the length of suction tube according to your need. The outlet pipe can be adjusted to fit 15 to 55 gallon drums..
  • Quality Assurance: Our roller pump is made of high-quality aluminum materials, with high anti-corrosion and rust prevention capabilities, and is durable. Each set has been tested before reaching the sales standard..
  • Filter: Each drum pump set is equipped with a filter. Just install it at the bottom of the oil suction pipe to effectively purify the oil and filter out impurities..
  • Good Sealing Performance: The oil suction pipe is threaded, not easy to wear, with high hardness, good connection performance, strong sealing, and effective prevention of oil leakage..
  • Scope of Application: Liquids that cannot be extracted: acid-base liquids, corrosive liquids, gasoline, water, urea, chemical solutions, edible liquids, etc. Extractable liquids: engine oil, hydraulic oil, gear oil, diesel oil, kerosene, edible oil (but not edible grade)..
Check Stock

EONLION 6 Liter Vacuum Oil Extractor 1.5 Gallon Fluid Change Pump Kit for Automotive and Marine

  • 【Almost any fluid】Great for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, water,etc.
  • 【Almost any tool】Ideal for automotive vehicles, water crafts, ATV/motorcycles, farm equipment, lawn equipment, household plumbing and much more....
  • 【Easy operation】This Vacuum oil extractor pump just simply pumps 10 to 20 times in a row to create a 6 liters powerful vacuum,The tool has tick....
  • 【Easy to clean】When you finish using it, you only need to add Soap and water to the pump to clean it..
  • 【BUILT TOUGH 】Built with solid materials and construction for durability, including brass hose fittings, a 6-1/2 foot reinforced 5/8 in. fill hose....
Check Stock

MSR Expedition Field Service Kit for Camping and Backpacking Stoves Dragonfly Kit

  • Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing,....
  • Dragonfly Service Kit also includes: DragonFly Flame Spreader, DragonFly G-Jet, DragonFly K-Jet, Fuel Line Filters, Cool Fuel Tool.
Check Stock

DC 12V Vacuum Pump 15L Brushed Mrico Oiless High Vacuum Pump -85Kpa for Laboratory, Medical Equipment Vacuum and Steam

  • Mrico Vacuum pump: Power: 20W. Voltage: 12V.
  • Professional industry:This rang of vacuum pumps were developed especially for laboratory operations, it satisfies the highest vacuum in terms of precision, reliability and ease of use..
  • Vacuum pump features:Silent and oil-free vacuum pump, no maintenance will not cause confusion, long life, only diaphragm and sealing element consumables.
  • Easy to operation: When you receive it, our vacuum pump has been installed with a connection connector and a silencer. You can install it on the air outlet to reduce noise more effectively. A silicone tube is also equipped, which can be connected and used..
  • Application? It is suitable for the range of air that can be pumped, laboratory, beauty equipment, medical equipment, etc .(please don't pump liquid or oil..
Check Stock

MULMART High Pressure Hand Pump 4 Stage, PCP Hand Pump 4500PSI for Air Rifle,Airgun,Scuba Tank,Paintball,Filling Tire,Hand Air Pump 40MPA

  • 【HIGH QUALITY MATERIAL】- The first grade pipe of the high pressure hand pump is made of stainless steel and the second grade pipe of the pcp air pump is made of aluminum-magnesium alloy which has the characteristic of high hardness and lightness. It can reduce friction when you pull the air hand pump..
  • 【NEW DESIGN】- Compared with the traditional 3-stage hand pump pcp, the 4-stage airgun pcp pump has great advantages: it can save at least 25% of the force and lighter than a 3-stage pump. And it carries with various connectors, easy to use..
  • 【EASY-TO-READ PARAMETER】- The pressure gauge is made of high quality stainless steel, the measure range of which is 0-6000Psi and working pressure is 0-4500Psi. Accurate display, explosion-proof pressure protection, safe and assured..
  • 【WATER-OIL SEPERATE FUNCTION】- Built-in double-deck oil and water separation tool, Made of aluminum alloy, Internal use of imported filter element, well filtration, the air is pure and breathable. It can reach 90 percent effect of water and oil separation, and it can be used over and over again..
  • 【WIDE APPLICATION】- The air hand pump can be applied in various occasions. For example, most PCP pistols, rifles and air guns, soccer, inflatable boat, cars and etc..
Check Stock

JIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters

  • ...to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly. The flat operation handle design is more convenient for palm to force..
  • EASY TO OPERATE: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that there isleakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • SATISFACTORY CUSTOMER SERVICE: The included stainless steel thermometer with index wide range 0 to 200℃ (32 to 400℉). Customized blow molding case keeps everything in place and protects the gauges during storage. 30 days full refund with returned undamaged JIFETOR cooling system leakage detector set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
Check Stock

YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3700 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for g....
Check Stock