Mophorn 8AN Fuel Line, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End
...hen its durability. It can stand high-temper, and pressure, with long-lasting lifespan. Max working pressure 300psi. Burst pressure 1000psi..
Flexible & Durable: The 8an hose oil line is constructed with a seamless extruded CPE synthetic rubber tube, resisting extreme heat, abrasion, and corrosion, providing minimum resistance to flow. Viscous materials will not cling to. With less volumetric expansion than the other tube..
8an Standard Dimension: This steel fuel line build as standard 8an size, with inside diameter 11.11 mm/ 0.44 in, outside diameter 16.2 mm/ 0.63 in. Working temperature range: -40℉ to 350℉. It is compatible with nearly every substance or agent used. Oil fuel line length: 10 m/ 32.8 ft..
20 Pics Hose End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, motor oil & coolant, etc..
ID2.5inch 64mm Straight Silicone Hose Coupler, High Temp 3-Ply Reinforced 76mm Length With 2 Clamps (Red, 64mm)
4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone Reinforcement is stronger made with Silicone fluorine polyester.
Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
Polyester layers to enable high temp and pressure than original rubber hose does .It is excellent resistance to Ultraviolet radiation, water, ozone and oxygen.
Inner Diameter: 3" (76mm). Length: 12'' (305mm). Wall Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone Reinforcement is stronger made with Silicone fluorine polyester or Silicone fluorine nomex.
Min temperature: -60 C/-140 F. Max temperature: 260 C/500 F. work pressure: 0.3 to 0.9 MPA. Bursting Pressure: 2MPA. Size tolerance: +/- 0.5MM.
4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
Polyester or Nomex layers to enable high temp and pressure than original rubber hose dose. .It is excellent resistance to Ultraviolet radiation,water,ozone and oxygen.
Inner Diameter: 3" (76mm). Length: 6'' (152mm). Wall Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Fuel /Oil Pressure Test Kit with Billet Aluminum Fuel /Oil Filter Cap, Fuel Pressure Gauge and Hose Kit for 2003-2007 Ford 6.0L Power Stroke Diesel
FITMENT -- 2003-2007 Ford F-Series（F250 F350 F450 F550）, E-Series, Excursion with 6.0L fit for Powerstroke Diesel. Direct-fit replace OEM part number 3C3Z-9G270-BA..
MATERIAL -- Made of high quality rubber with reinforced treated, both the inner and outer rubber is design for RMA-A oil resistance and permeability resistance. What’s more, the billet aluminum fuel filter cap is of the highest quality materials, ensures an unparalleled long lifespan..
FUNCTION -- Allow for accurate checking of both oil and fuel pressure. The hose has a screw-on fitting that will not leak fuel. This makes it easy to remove the cap after testing, or remove the line and leave cap on the vehicle. The liquid filled gauge and extended hose allow for the operator to drive the vehicle and read the gauge while fuel is under operating pressure..
BENEFITS -- Great looks and solid construction make this an outstanding upgrade over the plastic OEM cap..
100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Fuel Pressure Test Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing
...nch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage. These stainless hose clamps are perfectly suitable for home, automotive, industrial, gardening, mechanical, electronic, boat, marine and more. These 1/2’’ hose clamps are perfect for seal hoses, water pipes, plumbing, pipes, ....
VEVOR 300W Mobile Fryer Filter 116LB Capacity Oil Filtration System 110V 60Hz Perfect for Supermarket Restaurant, 58L, Sliver
...s made of silica gel, stainless steel mesh, Teflon three-layer material. The Humanized anti-scalding handle is made of polymer material, The food grade 304 stainless steel body, anti-scalding handle and food grade silicone gasket, to ensure the excellent quality of the machine. Good thermal insulation and corrosion resistance, ensure you can easily enjoy a variety of cuisine..
【Upgrade fryer filter】1. 5M tube length and swivel Joint design to prevent hose twisting, compatible with various small fryers. Overload, circuit breakers, fuses, triple protection to ensure the safety of machines and operators. Aviation outlet design, easy to store, mounted on 4 (2 locking) swivel casters for easy movement..
18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing
...ose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage. These stainless hose clamps are perfectly suitable for home, automotive, industrial, gardening, mechanical, electronic, boat, marine and more. These 1/1/4’’ hose clamps are perfect for seal hoses, water pipes, plumbing, pipes....
JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles
... are 15 specific ATF adapters included in this pneumatic ATF fluid pump kit, installed on the car oil pan and perform transmission fluid refill service for the ATF filler system. Multiple adapters constructed from hardened steel for maximum strength and longevity. Black electrophoretic finish for rust and corrosion resistance. Kit is suitable for Ford, BMW, Nissan, VW, Audi, Toyota, Volvo, Porsche, Benz, Hyundai, Infiniti, Lexus and etc..
Thoughtful Service: We are always trying hard as we can to provide customers with better quality products and services. Help you to complete the satisfactory shopping experience and tool selection. The item will be packed well to prevent the breakage along the way. If you have any questions, please feel free to contact us. Goods purchased in this store is refundable within 30 days as long as it's intact, and we provide 12-month after-sales quality support..
