Best Oil Treatment In Gas Tank

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • ...verflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread) 1 yellow Spouts and rubber gaskets, 1 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible..
Check Stock

KP KOOL PRODUCTS Gas Can Spout Replacement with Extension Spout - Gas can Nozzle - Gas can Vent kit & Gasket Filters - Used for Old 5 Gallon Gas can spout - Blitz - Midwest - Scepter and Other Brands

  • The gas can spout replacement kit includes complete package: 4 spout kits , 4 spout sealing caps, 4 coarse threaded bases, 4 fine threaded bases, 1 gas can drill , 8 replacement vent caps. The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • HIGH QUALITY: these gas can spout are made of HDPE plastic(same as 10 5 gallon gas can plastic), which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life,Safe without leakage.
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just need a simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • Please remember put the rubber gast under the gas can spout kit cap to avoid the gas leakage .QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

SHENGSHIYU Commercial Lpg Deep Fryer with 10l*2 Basket and Lid Stainless Steel Countertop Propane-lpg for Home, Kitchen, Commercial, Restaurant, Supermarket,56.5×47.5×43CM

  • ...ted all around, with high heat and fast heating, which greatly improves the utilization rate of gas combustion and is highly efficient and energy-saving. Fryers can meet your various needs for fried food. French fries, chicken wings, onion rings, shrimp or other snacks can be cooked perfectly..
  • 2. Large-capacity oil tank: Our gas fryer has a large-capacity frying basket of 8L/16L/18L and a double-tank design, so you can cook a variety of foods at once. Enough to provide enough ingredients for your family and restaurant, when each basket has its own oil container, the food taste is unlikely to transfer. It is very suitable for commercial and family use, such as fast food restaurants, cafes, snack bars, parties or family gatherings, etc..
  • 3. Safe and durable: The gas fryer is made of heavy-duty stainless steel, which is durable, corrosion-resistant, not easy to rust, easy to clean, does not leave dirt, and ensures hygiene. Equipped with a frying basket and lid to prevent hot oil from splashing out. The frying basket with a handle can prevent hot hands and is safe and easy to operate..
  • 4. Stainless steel gas fryer: The kitchen fryer is equipped with heat dissipation holes on the side, which can effectively reduce the internal temperature of the machine, re....
Check Stock

Oarlike 30 Gallon Gas Fuel Transfer Tank Portable Oil Storage Can for Diesel Gasoline Kerosene with Hand Pump Gas Caddy on 4 Wheels for Boat ATV Car Mower and Generators

  • 【Multifunctional Oil Storage Tank】Oarlike Gas tank is ideal for storing fuel like Diesel Gasoline Kerosene for automobiles, gas powered lawn and....
  • 【Efficient Fuel Transfer Can】Designed with wide opened fill inlet,the tank is easy to fill. The 2-ways hand pump makes it easy to siphon and....
  • 【Safe Gas Caddy】Features anti-static ground clamp for safety, discharged clamp is used to prevent accidental static discharges.Made of heavy-duty....
  • 【Easy to Use】Designed with 4 Wheels.2*10” Flat Free Wheel and 2*Caster Wheel with Brake.It is easy for anyone to move the Tank.The 8 feet hose....
  • 【Specifications】Large capacity of 30 gallon fuel transfer tank is easy to store, to transfer various kinds of fuel. Size -Pump Flow Volume:....
Check Stock

J-B Weld 2110 Metal Fuel Tank Repair Kit , Gray

  • Tank Weld: Our Metal Fuel Tank Repair Kit Has All You Need For Making Professional Quality, Permanent Repairs With State Of The Art Components And Easy To Follow Instructions..
  • Count On Us: For More Than 40 Years, Our Products Have Earned A Loyal Following From People Who Take Pride In Their Work. With Each Product We Innovate, We Continue To Provide The World'S Strongest Bond For Your Projects..
  • Simple To Use: No Removal Of Gas Tank Is Required To Stop Leaks. Easily Fix Holes Up To 3/8" Diam. Or Cracks Up To 4" Long. Includes Epoxy Putty, Fiberglass Cloth, Sandpaper, And Applicator..
  • Versatile & Dependable: Great For Gas Tanks, Metal Tanks, Oil Pan Repairs And More. Professionals, Mechanics And Avid Diyers Know J-B Gets The Job Done..
Check Stock

Fuel Petcock Valve Switch Fit for Harley Sportster Big Twin and Custom Tanks 1975-2006 Replace 62168-81 62167-81 62163-75 011401 Gas Tank Fuel Petcock Shut Off Valve Switch

  • Fitment - Fuel petcock valve switch compatible with Harley Sportster, Big Twin and Custom Tanks 1975-2006 Fuel Valve Petcock Switch Assembly (Please check to make sure that this will fit in your tank.).
  • Replaces Part #: Replace fuel vavle petcock shut off tank switch 62168-81 62167-81 62163-75 011401. Package Include: 1 x Petcock, 1 x Gasket Seal. Gasket prevent leakage. Oil seals act as seals to prevent leakage..
  • No Leaks - Internal Female 22MM thread. 1/4" barb accepts 1/4" ID hose, important to have proper placement of the o ring to prevent leaks.
  • Great Flow - The built-in filter allows for extra protection against debri entering your fuel system while still providing maximum flow. This fuel petcock valve switch parts has 3 positions switch. ON: Allow you to operate with normal fill-ups.
  • OFF: Completely shuts off gas flow when you are done riding.
  • RESERVE: Allow you to access the lower portion of the gas tank when gas level is low.
  • Good Quality - The petcocks are chrome-plated. Please check the threading on your bike to be sure this is what you need before you buy. Measure the outer diameter of the threaded outlet on the gas tank, not the inner diameter of the petcock nut..
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle Kit with Screw Collar Caps, Gasket Stopper,and 2 Kinds Gas Can Vent Cap for Most Style Gas Can, Highly Fitted, Smoothly Flow (4 Kit)

  • ... rubber sealing gaskets allow gas can spout to fit perfectly with your gas can,there will be no oil overflow even in the case of transportation or the gas can is down..
  • 2 Types of Gas Can Thread Cap - The internal thread size of coarse thread cap and fine thread cap all are 1.75 inches, It can only be used for gas tanks with a tank mouth size of 1.75 inches. Please measure the size of your gas can mouth before purchasing. Perfect size, to ensure a tight fit between the collar cap and the gas can..
  • Unobstructed Flow Gas Can Nozzle Kits - We provide two gas can vent caps. Gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.
  • Gas can vent caps-B is used for another oil can with a vent cap at the tail , can replace old vent caps. Prevents pressure from building up and ensures that you get a smooth and even flow when you pour out the liquid..
  • Build-in Plastic Strainer - We have installed a plastic Strainer in the gas can spout, which will not rust compared to the metal ones. It can effectively filter impurities and prevent them from causing serious damage to the machine..
Check Stock

Kuang No Cap Eagle Gas Can Replacement Spouts Rubber Spout and Stopper Jerry Can 1.5

  • 【10L Large Capacity】 - This 2.5-gallon (10L) large capacity tank provides you with enough endurance and is very suitable for being put on the car as a backup fuel for your journey. You don't have to worry about the lack of fuel..
  • 【Durable & Sturdy Material】 - The fuel gas can is made of high quality cold rolled steel plate with superb welding and sealing techniques for excellent durability and robustness. You don't have to worry about a dented or damaged fuel tank from a crash during rough off-road driving..
  • 【Easy to Carry】 - The size of the fuel tank is 14.1 inches x 10.35 inches x 6.4 inches (L x W x H), which is lightweight and convenient to carry. When you go out for a trip or camping, you can put this tank in the trunk of the car, which doesn't take up space at all..
  • 【Multi Purpose】 - This oil tank is suitable for automobile refueling, engine domestic lubricating oil, liquor and water bucket. Can be used to store fuel oil, petrol, diesel or any other liquor. And it's easy to clean when you're not using it..
  • 【Spout System Design】 - An additional spout system with extension tubing allows you to quickly replenish the fuel in the gasoline tank and improve your efficiency. At the same time, the unique vent inside the tank allows you t....
Check Stock

10L Commercial Deep Fryer, Gas Fryer, Propane Heating Deep Fryer, Commercial Countertop Deep Fryers with Basket, Stainless Steel

  • 【Fryer with 2 Fryer Baskets】Our stainless steel deep fat fryer comes with 2 wire mesh fry baskets allow you to cook different products simultaneously and hang your basket on the side of the tank to drain excess oil while you complete other tasks, the blue-coated handles provide the heat protection.
  • 【Stainlees Steel Fryer】The commercial deep fryer features both stainless steel, Stainless steel exterior and interior and double wall sides with stainless steel cabinet. built to last,liquid propane gas fryer has the power to fry a variety of popular appetizers and entrees to perfection..
  • 【Powerful Energy】Our gas fryer with 3count burner ,single burner: 30000 BTU/H,combined: 90000 BTU/H, the temperature for the DCF3-LPG/DCF3-NG ranges from 200°F (93°C) to 400°F (204°C). Includes Millivolt safety control system.which can provide enough firepower for your cooking or boiling to keep up with the high demand..
  • 【Easy to use & Clean】The french fry cooker oil cooling zone is located at the bottom of the tank.every inch of the frypot and cold zone can be cleaned and wiped down by hand,the large cold zone and forward sloping bottom help collect and remove sediment from the frypot to safeguard oil quality and support routine frypot cleaning..
Check Stock

FloTool 10701 Spill Saver Multi-Purpose Funnel Blue

  • Extended filler neck opens gas tank trap door.
  • Versatile design for multiple liquid applications including trans fluid, oil, power steering fluid, and gas/oil additives.
Check Stock