Best Oilfield Bearing

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

WQAZ Sealed Ball Bearings 2Pcs/Set UCP201 Ball Mounted Bearings Pillow Block Bearing Cast Housing Bearing OD 40mm ID 12mm Less frictional Noise

  • Made of bearing steel and cast iron shell, high hardness and durable..
  • Pillow block bearing is a kind of bearing unit which combines rolling bearing and bearing block, which has good versatility and interchangeability..
  • Two-bolt housing with ball bearing insert for ready-to-mount installation..
Check Stock

UCFL204-12 Pillow Block Bearing Mount Flange Bearing 3/4 inch Bore Bearing Unit 2-Bolt Flange Self Aligning Cast Iron Housing Set Screw Locking Style Flange Pillow Block Bearing

  • UCFL204-12Pillow Block Bearing: To choose the right pillow block bearing suitable for your application, donepart bearing offer a variety of pillow block bearing for tough and unconventional applications..
  • Bearing Size: 3/4 Inch Shaft Diameter, UCFL204-12 is set screw shaft locking type pillow block bearing..
  • Cast Iron housing: Donepart pillow block bearing made of cast iron, providing pillow blocks rugged and durable solid base..
  • Set Screw Style Pillow Block Bearings: 2 set screw design ensures great stability and rigidity improve the overall life and performance..
  • Easy Installation : 2 hole mounting design makes installation and maintenance. easy even in tight places, easily greasable..
Check Stock

Gimbal Bearing Alignment and Install Kit, Heavy Duty Engine Alignment Tool Set Fits for Mercruiser Alpha Bravo Volvo OMC

  • 【Superior Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
  • 【High Performance】Used to align drive shaft receiver to gimbal bearing. Also used to install drive shaft seal and gimbal bearing with included bearing install adapter..
  • 【Application】Align and install gimbal bearing and seal kit works for Mercruiser Alpha 1 Alpha MR Bravo OMC Cobra Volvo..
  • 【Easy & Convenient to Use】Our bearing install adapter doesn't require drilling hole. Can be install directly..
  • 【Benefits】Proper installation can prevent wear on the bearing, drive and coupler..
Check Stock

Pillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, (2 Pack -UCFL204-12)

  • Cast iron UCFL204-12 flange block housing increases life of the bearing.
  • pillow block bearing 3/4 UC204-12 chrome steel bearing for efficient operations at a wide range of speeds.
  • pillow block bearing 3/4 inch shaft Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN.
  • pillow block bearing Set screw prevents shaft slippage.
  • Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F.
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

WJB 2200-2RS-FG Self Aligning Ball Bearing, ABEC-1, Double Sealed, Steel, Metric, 10mm Bore Diameter, 30mm Outer Diameter, 14mm Width, 360 lbs Static Load Capacity, 1640 lbs Dynamic Load Capacity

  • WIDE SCOPE OF APPLICATION: Widely used in bicycle industry, paper making machinery, axles, woodworking machinery, etc..
  • BEARING STEEL MATERIAL: The self-aligning ball bearing is made of high-quality bearing steel material to increase rigidity and prolong service life..
  • IMPORTED MATERIALS: The spindle bearing keeps the imported materials polished, thus saving energy consumption and increasing speed..
  • FAST SPEED AND LOW NOISE: The impact on the equipment can be reduced depending on the ball bearing running fast and low noise..
  • SPINDLE BEARING: Flat and smooth spindle bearing with clear letters for special cars equipped with complete models..
Check Stock

LESHAREYoyo Non-Responsive Pro X3 for Advanced yoyo Players Includes Responsive yoyo for Beginners Aluminum Yoyo for Kids + 5 yoyo Ropes + Gloves + User Instructions

  • X3 Professional Yoyo: LESHARE x3 unresponsive yo yo is made for professional players, support1A / 3A / 5A string tricks..
  • Fine Craftsmanship: it’s made by precise programming, plus cool color treatment of aluminium. It features great balance and anti-scratch for daily use..
  • Unresponsive Concave Bearing: thanks to quality bearing, it spins with long sleep time, do easier tricks..
  • Responsive / Unresponsive Bearing: We’re excited to include responsive bearing for beginners to enjoy yoyo. With the growing of skills, you can play more tricks with unresponsive bearing..
  • The yoyo you are looking for? ①Responsive and unresponsive mode, yoyoing from beginner to pro, responsive yoyo is for beginner and unresponsive for pro.
  • ②Aluminum alloy + precise surface treatment, more durable③quality bearing long sleep time, ultra smooth and balance bearing, easier and more powerful. Let’s share joy..
Check Stock

Reel Butter Bearing Lube- 1 oz

  • This bearing lubricant is for use on all saltwater and freshwater reels to keep them performing at their best even after years of use.
  • Due to its ultra low viscosity, the bearing lubricant works thoroughly into all bearing components and remains in place.
  • Preserves your reel’s bearings by providing corrosion protection to prevent bearing noise, grinding, and reel performance issues.
  • Can be used on other mechanical equipment.
  • cleans by flushing out all dirt and foreign debris picked up over time.
  • This bearing lubricant is not a graphite-based lubrication system.
  • it is 100 % synthetic and offers reliable performance over a wide range of temperatures.
Check Stock

OMT Bearing Puller Set 5 Ton Capacity Bearing Separator Pinion Wheel Bearing Removal Kit with 2 and 3 Jaws Wheel Hub Axle Puller Set Heavy Duty Bearing Splitter Tool Kit with Case

  • VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels.
  • ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs.
  • WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use.
  • suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks.
  • EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing.
  • the included tools enable you to reach and remove bearings in tight spaces effectively.
  • DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use.
Check Stock