Best Olympia Inch Vise

Pony 26545 4-1/2-Inch x 6-1/2-Inch Light Duty Woodworker's Vise

  • This item is Pony 26545 4-1/2-Inch x 6-1/2-Inch Light Duty Woodworker's Vise.
  • Used for Handtools & Tool Organizers, Vices.
  • Vise is for light duty home and shop use.
  • Designed to mount to the face of wood work benches.
  • Castings are grey iron with orange baked enamel finish.
Check Stock

RIDGID 47770 Threading Machine Dies, Right-Handed High-Speed NPT Pipe Dies with Nominal Pipe Size of 1-Inch to 2-Inches for Universal Die Heads

  • Crank handle is anchored to the base of the bench vise.
  • Rugged, cast-iron base features a handy pipe rest and bender.
  • Bench vise has a 1/8-inch to 4-inch (6 mm to 100 mm) pipe capacity.
Check Stock

Bessey - BESSEY BV-VB BVVB Vacuum Base Vise,Silver

  • Product Size: Jaw width - 5 inch, jaw opening - 4.92 inch, jaw height - 1-1/2 inch.
  • Product Material: Vise bed is made from grey cast iron.
  • Product Advantages: After fine grinding treatment, K type angle lock nut is made from the highest quality ductile Iron, firm and durable.
  • Product Use: Fit for milling, drilling machine and precision parts finishing It is an essential tool for fitters.
  • Products Include: 1Pcs 5 inch precision mill vise.
Check Stock

AUTOTOOLHOME Adjustable Pin Vise Hand Drill Chuck Capacity 0-5/16\ Model Hobby Tool fit Drill Bit Screwdriver Bits

  • Pin vise is useful for electronic assembling, tool-making, model making and hobbies.
  • Holds small drills, deburrers, wires, screwdriver bits,files, reamers and other small tools that can be difficult to hold while working.
  • Drill pin vise has a 3-jaw hardened steel keyless chuck and sturdy plastic non-slip handle that is ergonomic and easy to hold.
  • Adjustable Pin Vise is the largest and most robust pin vise in our line up of tools.
  • the capacity:0-5/16inch, use it in both commerical and home applications.
  • Compact size is perfect to go in a toolbox or in a pocket.
Check Stock

Hardware Factory Store 2 Way 4-Inch Drill Press X-Y Compound Vise Cross Slide Mill

  • Durable cast iron construction, Powerful serrated steel jaws.
  • 4 Inch Wide Jaw, Cold rolled steel screws.
  • 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing.
  • Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking.
  • 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel.
Check Stock

ZGRM Vise Precision Bench Clamp 4-Inch Drill Press Vise Table Vise (Large)

  • Data: The jaw of vise can be opened up to 4 inches,Net weight 5.3 lbs..
  • Wide range of use: 4 inch cast iron drill vise can precision process various shapes of wood, metal, plastic and other precision parts. In order to protect the soft metal, wood or other fragile items, and firmly fix it in place, we have specially provided additional RUBBER PAD..
  • Stability: Fix the workpiece firmly in place to achieve safe and accurate drilling. The heavy-duty cast iron base and four on-board mounting slots provide stability to the vise during operation..
  • Broad compatibility: 4-inch drill presses are compatible with most drill press benches on the market..
  • Material: The clamp table is forged with a spray-forged hardening process to ensure ultimate durability and long service life..
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • ...bing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1 x 3.5 inch (35.8x15.5x8.9 cm) plastic blow-molded carrying case.
Check Stock

Hoppes Gun Vice w/Dry Kit HGVH

  • DIMENSIONS: 32.5 inch L x 11 inch W x 10.5 inch.
  • EASE OF USE: All 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop (hardware not included).
  • VERSATILE: Ball and socket articulating clamp pads allow for the pads to adapt to any firearm’s surface with height and length adjustable front and rear clamps.
  • NON-DESTRUCTIVE: Non marring, glass filled nylon vise/clamp construction.
  • DURABLE: Features a steel tube frame structure.
Check Stock

VEVOR Woodworking Vise 7 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise Quick Release Woodworker s Vise 8 Jaw Opening Front Screw Vise for Woodworking Cutting and Drilling

  • 7 Inch Professional Use: Jaw width: 7"/180 mm. Jaw opening: 8.1"/205 mm. Throat depth: 2.8"/70 mm. Weight: 21.2 lbs. Our professional-grade....
  • Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and....
  • Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and....
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table.....
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. Compact vise....
Check Stock

Ridgid 16703 TRISTAND Portable Chain Pipe Vise

  • Features a quick grab, self-locking latch and carrying handle for easy transport.
  • Complete with pipe rest, 3-pipe benders, slots for hanging tools and ceiling brace screw.
  • Integral legs and tray fold in for easy carrying and setup.
  • Large vise base overhangs the front legs for a clear tool swing.
  • Chain pipe vise has a 1/8-inch to 2-1/2-inch (3 mm to 60 mm) pipe capacity.
Check Stock