OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Yellow - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: True Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OVERTURE Easy PLA 1.75mm 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Easy Digital Blue)
... manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.
Larger spool inner diameter design makes feeding smoother.
【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm.
【Cost-effective and Wide Compatibility】With over 9 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more.
【LIFE-TIME GUARANTEE】No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier 3d printer filament white easy pla 3d printer filament 1.75 pla spool 3-d printer filament 1kg pla filament mk3 1.75 filament 3d printer accessories 3d art ender 3 pla filament Engineering Maker Layer adhesion prototyping PLA roll polylactic acid.
Multicolored: Clear S14 LED string light bulb with colored filaments: reddish orange filament(red light), clear filament(blue light), lemon filament(green light), orange filament(warm light), glowing off as same as glass light bulbs.
Decorative Replacement Bulbs: 2200K warm white S14 LED with 100 Lumens to fit for 48ft patio string light or applications where the bulb is in open view ideal replacement for your E26 socket lighting fixtures bulbs.
Energy Efficiency: Saving energy and your cost. 1 watt S14 LED light bulb is equivalent to 5 watts incandescent bulb, less energy than traditional incandescent lamp. Low heat dispersion and High lighting efficacy.
Easy To Install: E26 Regular Base for string light or other E26 screw base lighting fixtures. Please cut off the power before installation. 24 pack/box.
Wide Application: Perfect for lawn wedding venues, outdoor patios, bars, bistro, restaurants, front porches, gazebos, pergolas and any decorative place.
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing..
The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet..
Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard..
Used with other motherboards: The material detection module uses the level tra....
ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Red.
Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensu....
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle
A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Upgraded SUNLU 3D Printer S8 Pro, FDM 3D Printer with Silent Motherboard, Large Printing Size 310x310x400mm, Resume Printing, Removable Magnetic Heated Bed, Pre-Assembled Printers, Open Source
... and start printing. Disassembly is also simple, it’s convenient for users to upgrade and build their own printers(open source).Greater stability..
④【Intelligent Clog Detection&Resume Printing】→ Suspend when clogging, resume after hadled. High-end detection module, real-time detection and identification of filament loading state, instantaneous response to suspend printing within 1 second after filament run-out..
⑤【Equipped with with filament dryer box】→ SUNLU’s new version printer S9 Plus is compatible with many kinds of FDM printing filaments in the market, including PETG, ABS, TPU, Wood Fiber, Carbon Fiber, PLA filament, etc. Filament drying while printing , removal of moist and brittle filaments, achieving optimum print quality..
