Best Optics For Ar Pistol

F*ck The Patriarchy: Getting Smutty for a Cause

  • ➤Durable Material: The MAGORUI flip up sights are made for high quality steel. That makes the are sights durable, Non-reflective, anti-corrosion, anti-rust and anti-fade. Please use with confidence..
  • ➤Fiber Optics: This MAGORUI iron sight has a fiber optics design. Thanks to the visible green and red dots, it can provide the brightest aiming points in low-light conditions..
  • ➤Easy Installation: You just need to use the Allen wrench to install the sight to your AR (Allen wrench included), no other skill is needed..
  • ➤Compatible with: This iron sight is Compatible with most Picatinny and Weaver rails. The iron sights extend only 2″ above the top rail, it won’t take any interference with your primary optics or military IR illuminator /laser sight..
  • ➤Guarantee: All our products are under a 30-day warranty policy. Please contact us without any hesitation if you have any problems with our products.
Check Stock

Case Club PS90 Pre-Cut Waterproof Compact Breakdown Rifle Case (Upgraded Gen-2)

  • Holds a broken down FN PS90 or P90 rifle with or without optics, 5 rifle magazines (in the lid) along with a semi-automatic pistol with 2 pistol magazines. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure..
  • Accommodates up to 16" barrels and most optics. Does NOT accommodate side attachments. See image diagram and drawing for fitment information..
  • Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Case shell was originally made for laptops making this perfect for discreet travel..
  • Pistol cutout accommodates full size, compact & subcompact pistols without under-barrel attachments or optic. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths..
  • Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off cente....
Check Stock

Northtac 2 MOA Red Dot Sight - Ronin V10 1x35mm Red Dot Sight - Shake Awake AR15 Red Dot - 50,000 Hour Battery Life - Tactical AR15 Reflex Sight with KillFlash - Shotgun Red Dot Sight 12 Gauge

  • [TOURTURE TESTED RED DOT] Constructed from aircraft grade aluminum, the Ronin V10 is built with operators in mind. It was created for pressure and....
  • [TRUECOLOR RED DOT OPTICS] Northac TrueColor Lens is an incredibly sharp reflex sight. It provides the clearest colored dot with high contrast and....
  • [QUICK ZEROING] NorthTac Ronin's mounting system ensures perfect alignment with your iron sights on MIL-STD Picatinny rails. We have made it....
  • [LONG LASTING AR15 RED DOT] NorthTac Ronin needs just one AAA battery to provide over 50,000 hours of operation. There are 12 brightness settings....
  • [IPX7 WATER PROOF] We made sure that our ar optics aren't just water resistant but are actually waterproof red dot sights. We have taken every measure....
Check Stock

Highwild AR500 Steel Hostage Target 12' x 20' x 3/8' Armored Steel Bullseye Reactive IDPA Shooting Target with 2X4 T-Post Bracket

  • ▶ Includes 12" x 20" AR500 hostage target, 4" AR500 top swivel paddle, 6" AR500 center swivel paddle and 2x4 + T-post mounting bracket.
  • ▶ Targets are all laser-cut from 3/8" AR500 steel plate in our own facility. Great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Handguns should be used no closer than 10 yards and rifles 100 yards..
  • ▶ Universal Target Mounting Bracket for use with either 2x4 board, T-post or Highwild adjustable steel post(All needs to be used with bracket fasteners). Holds target at an approx 20 degree angle..
  • ▶ Fun Shooting - The Swivel Paddles use gravity to swing from side to side while shooting, different directions of movement will show the shooter different colors(Orange/Yellow)..
  • ▶ The dulcet "Ding" will be heard in no second when hit and you will see your shots. Get it and have fun in your range shooting!.
Check Stock

VISMIX Battle Belt with 9mm Pistol 5.56mm AR15 Rifle Magazine Pouch Set for Shooting Hunting

  • 【Battle Belt】2" width MOLLE tactical belt with laser-cut laminate MOLLE system convenient for you to attach more tactical gears (mag pouch, MED kits, pistol holsters, etc ).
  • 1.5" width inner loop belt to ensure support & fit the MOLLE battle belt, it also can be used separately..
  • 【Battle Belt】VISMXI battle belt is easy to adjustable length to fit your need. There have two sizes (M&L) and two colors (Black&CB) for you to choose from. Medium fit 33"-36" waist, Large fit 37"-41" waist. Notes: Please re-measuring the size of your pant before purchase..
  • 【Pistol mag pouch Compatibility】 Fit most 9mm, 40cal, 45acp double stack magazines(single stack unavailable), like Glock 17/19 and MP5/MP7 magazines. (Not work for Glock26 or similar magazines which are too short in height)..
  • 【Rifle mag pouch Compatibility】 Fit for 5.56mm AR15 5.56x45 5.56 NATO M4/M16 magazines, etc. (Not work for AK 7.62 magazines & 10-round AR15 magazines)..
  • 【MOLLE strap】 Can be attached to most tactical belts/vests/pouches with MOLLE strap & snap button on the back of mag pouch, you don’t worry about them falling off because of the fine stitching and perfectly fixed..
Check Stock

Ade Advanced Optics Stingray UMRD Micro Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol - 6MOA

  • Ade Stingray is Designed to to the smallest and lightest red dot to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun....
  • Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to....
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white....
  • Does NOT fit optic plate/cut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting....
  • Just like $400 RMR competitors, It does not has a on/off power button. The light turns brighter or lower automatically. If you do not use it, put the....
Check Stock

TuFforce Subgun Soft Case, 25″ x 12″, for AR & AK Pistol, Keltec Sub 2000, Kriss Vector, MCK, Mossberg.715P, PAP M92 & FN P90 … Black, TG-GP25B

  • Tufforce 25″ x12″ Rectangular Gun Case for Pistol of AR, AK, Keltec Sub 2000, Kriss Vector, MCK, Mossberg 715P…….
  • 7 magazine Holders inside for different sizes of Pistol and Handgun Magazines,.
  • One Pistol Pouch inside, and Molly system on back.
  • Outside Size: 25″ x 12″ x 3″, thickness of form 0.8″. also fit for MICRO CONVERSION KIT.
Check Stock

ShootingTargets7 Chain Target Hanging Straps Pair 12 inch | with Hardware Kit for Mounting AR500 Steel Shooting Targets | Use with Most Target Stands

  • ▶ Includes 7" x 12" AR500 hostage target and 2-1/2" AR500 top swivel paddle..
  • ▶ Fun Shooting - The Swivel Paddle use gravity to swing from side to side while shooting..
  • ▶ Our patented connection structure enables the swivel paddle to move more steadily and smoothly, and the swivel paddle can be easily removed if you....
  • ▶ Targets are all laser-cut from 3/8" AR500 steel plate in our own facility. Great for most pistol and rifle calibers, including 9mm, 45ACP, .223,....
  • ▶ The dulcet "Ding" will be heard in no second when hit and you will see your shots. Get it and have fun in your range shooting!.
Check Stock

Body Armor Vest Plate Bulletproof Shield XXL 24 x 15 6mm 24lb

  • This bulletproof shield is laser cut off AR500 steel plates and welded with steel tube handle and armrest.
  • AR500 steel plate can withstand multiple shoots without structure failure like composite material.
  • 4mm (5/32") version weights about 10 Lbs 5 oz, It is a Level II that stops 9 mm, .45 pistol shots.
  • 6 mm (1/4"+) version is heavy at 14 Lbs 8 oz. It is a Level III that stops rifle shoots.
Check Stock

Highwild AR500 Steel Hostage Target 10' x 16' x 3/8' Armored Steel Reactive IDPA Shooting Target - Neon Color

  • ▶ Includes 10" x 16" AR500 hostage target and 3-1/4" AR500 top swivel paddle..
  • ▶ Fun Shooting - The Swivel Paddle use gravity to swing from side to side while shooting..
  • ▶ Our patented connection structure enables the swivel paddle to move more steadily and smoothly, and the swivel paddle can be easily removed if you don't want to use it..
  • ▶ Targets are all laser-cut from 3/8" AR500 steel plate in our own facility. Great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Handguns should be used no closer than 10 yards and rifles 100 yards..
  • ▶ The dulcet "Ding" will be heard in no second when hit and you will see your shots. Get it and have fun in your range shooting!.
Check Stock