Best Outboard Gear Puller

YAMAHA OEM 2006+ F75 F90 F115 F90B VF90 Winterization Kit Oil Change Fuel Stabilizer Gear Lube Maintenance Pump Fuel/Water Separator

  • Contains all parts needed to WINTERIZE your Yamaha 2006+ F75 F90 F115 Outboard.
  • Includes Yamaha Oil Change kit, Lower Unit Gear case lube, necessary gaskets, and Gear Lube Pump.
  • Keep your Outboard protected with Yamalube Yamashield Rust & Corrosion Protectant.
  • Yamalube Stor-Rite Engine Fogging Oil is included to ensure your cylinders are fogged to prevent rust.
  • Yamaha MAR-MINIF-IL-TR / MAR-M10EL-00-00 Mini-10 Fuel/Water Separator Filter & 6D8-WS24A-00-00 Primary Fuel Filter is included.
Check Stock

GDNTMU 2 Stroke 2.3HP Outboard Motor Boat Engine Heavy Duty Fishing Boat Engine Water Cooling CDI System 8500r/min(US Stock)

  • 【MULTI-FUNCTIONAL OF TWO-STROKE MOTOR 】- 2-STROKE motor is fixed on the outside of the beam and is designed to pivot on its mounting seat to control the direction of thrust. Therefore, in addition to providing propulsion, the outboard also provides steering control and a perfect balance of power and efficiency. When the engine is not running, Skeg can also act as a rudder. Note that the motor must be started underwater..
  • 【MARINE LIGHT AND SMALL OUTBOARD ENGINES FOR KAYAKS AND CANOES (MARINE ENGINES) 】- Increasing low horsepower (two-stroke) outboard engines can strengthen boats such as kayaks and canoes. Two-stroke engines are louder, less fuel efficient, and maintainable, but they provide higher performance. If the rower?s arms become too tired and/or need to paddle hard, an electric motor can be helpful..
  • 【ADVANCED AIR COOLING SYSTEM 】- Advanced engine water cooling system can improve engine performance. The air cooling system allows you to fish all day without overheating. Due to water quality issues, air cooling eliminates the time for the pump part, which is very useful for daily use..
  • 【ADDITION FUNCTIONS】 - Features 360 degree steering rotation for reverse without gear shifting.Start-In-Gear protection/clutch feature prohibits prop....
Check Stock

BJTDLLX 2 Stroke 18HP Outboard Motor, 246CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System Boat Motor, Tiller Control Shaft 40CM/16inch, -Short Shaft

  • 【2-stroke 18HP Outboard Engine】displacement: 246CC.
  • 【Details】control system: #93 gasoline.
  • packaging size: 133x71x38.5cm/52.3"x27.9"x15".
  • recommended Propeller range: 3 -9"1/4"x8".
  • 【Advantages】water cooling technology improves the reliability of the whole machine.
  • light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
  • 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
  • after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
  • 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard e....
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

3-Jaw Gear Puller Set, 3' 4' 6' Gear Removal Tool Kit for Slide Gears, Bearings, Pulleys and Flywheels

  • Ideal removal tool for slide gears, pulleys, bearings and flywheels off of a shaft without damage to your application..
  • The 3-jaw gear pullers are made of forged and hardened steel with strength and longevity, which is durable and has a good bearing capacity..
  • The 3 inch/4 inch gear puller has 3 positions and the 6-inch gear puller has 6 positions. Steel drive screw is cold-rolled and acme-threaded to provide smoother performance..
  • The package contains three sizes 3-jaw gear pullers of 3 inch, 4 inch and 6 inch to meet your various requirements according to different needs..
  • If you have any questions or concerns, please feel free to contact us. It is our policy to render the best service to our customers..
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

Yamalube Performance All Purpose 4-Stroke Oil 10W-40 32 oz.

  • Genuine OEM Yamaha Lower Unit Gear Lube & Gaskets.
  • Includes Lower Unit Gear Lube Quart Pump.
  • Fits ALL Yamaha Outboards that use SAE 90 Gear Lube.
  • Keep your Yamaha Outboard running at peak performance with OEM Genuine Yamaha Parts.
Check Stock

Electric Outboard Motor Brushless Motor Marine Boat Engine 21V, Thrust Transom Mounted Saltwater Electric Trolling Motor w/LED Battery Indicator 188VF Electric Drill Powerful Outboard Engine

  • ...000mAh has a range of about 12 minutes. In addition, the product is equipped with a backup battery that can provide you with a double range..
  • ✔Excellent Performance: The electric drill with maximum torque of 25-28N. M provides enough power for the boat to run stably. The outboard's three-blade propeller (7.08" diameter) reduces drag and balances efficiency and thrust for optimal performance. The 150kg/330lbs propulsion power of the outboard can provide stable propulsion for the boat to drive smoother and faster..
  • ✔Infinitely Adjustable Speed: The outboard with an infinitely adjustable speed button gives you the flexibility to adjust the operating speed from 0 to 1450 rpm at the touch of a button to meet different needs..
  • ✔Multifunctional Drill: With 20+1 torque settings, the drill is not only an ideal power provider for outboards but also a drilling assistant for a wide range of materials. This two-in-one outboard and drill tool is the ideal choice for you..
  • ✔Flexible Operation: This outboard engine has forward and reverses gears to let you easily control the dire....
Check Stock

Pontoon [Explicit]

  • ...,Starting System: Manual start,Control System: #93 gasoline.Recommended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Standard fuel tank capacity: 24L.
  • 【12HP 2 Stroke Outboard Boat Motor】Using 2 Stroke Power, 12HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
  • 【Durable】Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
  • 【Water Cooling System】Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant motor access. Standard CDI ignition system for easy starting and improved performance.Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Su....
Check Stock

Funny 92nd Birthday Gift T-Shirt - 92 Year Old Cards Shirt

  • Gear lube pump and a quart of High Performance gear lube conveniently packaged together.
  • Use the pump to replace your gear case oil with ease.
  • May be used with any sterndrive and outboard which uses a 3/8"-16 drain/fill screw.
Check Stock