Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System
Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
316 Stainless Steel OutBoard Engine Support Heavy Duty with Black Mounting Plate Up to 7.5-10hp for 2 Stroke Engine
Durable Material – Made of durable 600D marine grade polyester with high quality waterproof undercoating. Fits most outboard motors 50-115 HP, cover size: 26"L x 22"W x 24"H. NOTE: This cover is an universal fit type, don't just refer to how much the horse power your motor is, please measure your motor diamensions carefully before you buy!.
Ultimate Waterproof - Excellent for boat off-season outdoor storage, mooring. High-level double stitching, all seams sealing taped can improve durability. Full coverage protects your engine from rain, wind, snow, fog, dust and scratch..
Multiple locking systems - Heavy duty Elastic cord make adjustment for a snug fit. Click-close straps keep cover always securely fastened especially in severe weather..
Upgraded Design – Quick-release buckle straps in front side allows easy install and remove. Air vent at back side added ventilation for long-term storage situation, reduces inside condensation and wind lofting. Giving your motor all year protection and extending service life..
Customer Service - 2 YEARS WARRANTY for any quality-related issue..
Fuel Pump with Gasket - Compatible with Johnson Evinrude Outboard Motor - Pre 1993 6hp 9.9hp 15hp Models - Replaces Part 395091 397839 18 7350 397274 391638
Replacement Fuel Pump for Outboard Motors. Pre 1993 engine models. Fixes common issues.
motor wont run at full power or will only run with choke on..
Replaces Part numbers - 397274, 397839, 391638, 395091, 9-35350, and 18-7350.
Compatible replacement for Johnson Evinrude Outboard Boat Engines produced up to 1993. Including 6hp, 8hp, 9.9hp, and 15hp.
Factory quality, fit, and finish. Each fuel pump is carefully assembled and tested to insure flawless performance on your Outboard motor. Each fuel....
Backed by a 2 YEAR WARRANTY, rest assured your boat will be back to full power..
6.5HP 4 Stroke Outboard Motor Fishing Boat Manual Start Engine Short Shaft Boat Engine Motor w/ Water-Cooling Motor CDI System Tiller Control 123CC US
CDI Ignition System: This outboard motor features a CDI ignition system. You can start the motor quickly and safely. It saves your time and is convenient to use..
High Efficiency: The outboard motor with a superior engine water cooling system can overcome huge water resistance, increase driving speed and improve its efficiency..
360-Degree Steering Function: This outboard has a 360-degree steering function that allows you to reverse the boat at ease without shifting gears..
Independent Fin Streamline Design: When it collides with an object underwater, the design can well protect the propeller that is running at high speed..
Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible..
GDNTMU 2 Stroke 2.3HP Outboard Motor Boat Engine Heavy Duty Fishing Boat Engine Water Cooling CDI System 8500r/min(US Stock)
【MULTI-FUNCTIONAL OF TWO-STROKE MOTOR 】- 2-STROKE motor is fixed on the outside of the beam and is designed to pivot on its mounting seat to control the direction of thrust. Therefore, in addition to providing propulsion, the outboard also provides steering control and a perfect balance of power and efficiency. When the engine is not running, Skeg can also act as a rudder. Note that the motor must be started underwater..
【MARINE LIGHT AND SMALL OUTBOARD ENGINES FOR KAYAKS AND CANOES (MARINE ENGINES) 】- Increasing low horsepower (two-stroke) outboard engines can strengthen boats such as kayaks and canoes. Two-stroke engines are louder, less fuel efficient, and maintainable, but they provide higher performance. If the rower?s arms become too tired and/or need to paddle hard, an electric motor can be helpful..
【ADVANCED AIR COOLING SYSTEM 】- Advanced engine water cooling system can improve engine performance. The air cooling system allows you to fish all day without overheating. Due to water quality issues, air cooling eliminates the time for the pump part, which is very useful for daily use..
【ADDITION FUNCTIONS】 - Features 360 degree steering rotation for reverse without gear shifting.Start-In-Gear protection/clutch feature prohibits prop....
4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)
①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
②DETAILS: Model: 4.0 horsepower jet pump.
Refueling method: No. 92 unleaded gasoline is recommended..
DNYSYSJ 50kg/110lbs Capacity Outboard Boat Motor Trolley Stand, Black Boat Engine Boat Motor Carrier Cart Loaded Trailer Multi Purposed Engine Stand
...made of steel, the boat motor cart, weighing about 26lbs, can hold up to 440lbs (SORRY, the product instruction was printed wrong by the supplier. The right weight capacity of the item is 440LBS. We will email you the correct instruction.) . And the hanging board is made of solid wood, more sturdier for holding the outboard motor..
REAR WHEELS FOR MOBILITY: The boat motor stand is designed with 2 large rear wheels whose diameter is about 9.45”,, which makes it easier for you to move it around. And it comes with a strap for securing item..
MULTI-PURPOSE: The boat motor cart is ideal for storing, maintaining and transporting the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
ERGONOMIC HANDLE: Being designed with 2 handles allows you to steer and move the stand more conveniently. You can move it around the garage at ease..
ASSEMBLY REQUIRED: Assembly is needed. And the overall dimension of the cart is about 27.9”W x 33.5”D x 42”H. TIP: It would be better if you do not fully tighten the screws until all the parts are lined up....
VEVOR Boat Motor Stand, 130 LBS Outboard Motor Carrier, 60 KG Outboard Engine Stand, Two Wheels Boat Motor Dolly, Heavy Duty Multi Purposed Portable Boat Motor for Motor Repair, Maintenance, Storage
STEEL CONSTRUCTION: With tubes made of steel, the boat motor cart, weighing about 32lbs, can hold up to 315lbs. And the hanging board is made of solid wood, more sturdier for holding the outboard motor..
WHEELS FOR MOBILITY: The boat motor cart is designed with 2 universal front caster wheels and 2 rear wheels composed of 2 single wheels. And with wheels, moving it around will be easier..
MULTI-PURPOSE: The boat motor cart is ideal for the storing, maintaining and transporting the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
ASSEMBLY REQUIRED: Assembly is needed. And the overall dimension of the cart is about 26'' W x 43''D x 46''H. TIP: It would be better if you do not fully tighten the screws until all the parts are lined up properly..
ERGONOMIC HANDLE: Being designed with 2 handles allows you to steer and move the cart more conveniently. You can move it around the garage at ease..
Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size
3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
