WAVLINK AC1200 Long Range Outdoor WiFi Extender Signal Booster in 4 High Gain Antennas, Dual Band 2.4+5G 1200Mbps 802.11AC PoE Access Point (AP)/Router/Wireless Repeater Internet Amplifier
Latest 802.11AC 2.4GHz and 5GHz High Transmission Power- This outdoor WiFi extender supports the latest 802.11AC WiFi standard, which is incredible 6 times faster than Wireless 802.11 N. A dual-band WiFi antenna range extender can boost your existing wireless coverage with speed of up to 2.4GHz on 300Mbps and 5GHz on 867Mbps. Adopt MTK 7620A+7612E dual chips ensure more stable performance..
4 x 7dBi Detachable Omni Directional WiFi Antennas Outdoor- Higher antenna gain extensively strengthens Wi-Fi signal and expands wider coverage in the open air, stability technology automatically avoids channel conflicts using its channel selection feature, meet outdoor long range coverage wireless network requirement, cover hard-to-reach dead zones..
Power-Over-Ethernet Outdoor Access Point- Integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlet is not available by combing your power and network data connection into a single RJ-45 cable.
(Multi Operation Modes) - Support Access Point AP, Repeater and Router mode.
(1000Mbps Gigabit WAN Port) - Support 10/100/1000Mbps speeds, 10x faster than a standard Ethernet port..
IP65 Rated Weatherproof Outdoor WiFi Repeater Designed for Harsh Environment- IP65 rated weatherproo....
Ueevii Universal Wireless Bridge Bracket Mount/360°Adjustment Wall-Mounted/3.8cm Diam,2.5mm Thick Stainless Steel Mount,Sturdy and Durable/Wildly Used on Outdoor AP,Point to Point WiFi Bridge/2-Pack
Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
Wall-mounted installation: The bracket mount is wall-mounted, suitable for any angle of the wall of the house, very suitable for fixing indoor and outdoor wireless bridges, outdoor access points and other equipments..
High waterproof performance: The rod of the wireless bracket mount is equipped with a waterproof cap, which is fully waterproof in terms of material itself or appearance design..
Wide range of uses: This point to point wireless bridge bracket mount is suitable for Ueevii brand and many other wireless bridges and AP products on the market..
KuWFi 2-Pack Wireless Ethernet Bridge, Long Range WiFi Access Point 5.8G Outdoor AP CPE Kit IP65 Waterproof WiFi Bridge Point to Point Support 2KM for PTP/PTMP(Pre-Program)
【What KuWFi CPE200 is】an 11AC 5GHz 900Mbps wireless bridge point to point outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 2KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃.
【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200 gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR.
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode.
Support SSID broadcasting, Multi SSID up to 4.
WiFi coverage before 2 houses with 2KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable.
TP-Link EAP110-Outdoor V3 | Omada N300 Wireless Outdoor Access Point | WiFi Coverage up to 200 meters| Passive PoE w/ Free PoE Injector | SDN Integrated | Cloud Access & Omada App | White
Fast Speeds with 2x2 MIMO — Equipped with Wireless N300 2x2 MIMO technology, the EAP110-Outdoor easily delivers Wi-Fi speeds of up to 300 Mbps..
Indoor/Outdoor Use — The durable, weatherproof enclosure protects the access point against harsh outdoor conditions and provides stable wireless coverage up to 200m plus range at 2.4GHz. Discreet appearance can also fit with any indoor scenarios..
Integrated into Omada SDN — Omada Software Defined Networking platform integrates network devices including APs, switches & gateways with multiple control options offered - Omada Hardware controller or Software Controller. Standalone mode also applies..
Cloud Access — Remote Cloud access and Omada app brings centralized cloud management of the whole network at different sites—all controlled from a single interface anywhere, anytime..
SDN Compatibility — Make sure your devices/controllers are equipped with SDN firmware. (Or upgradable). SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. Details found on TP-Link website..
Passive PoE for Easy Installation — Supports Passive PoE power supply and can be powered by the provided PoE adapter, making deployment effortless and flexible..
Wireless Bridge UeeVii 5.8G Outdoor CPE Point to Point Long Range Access with 14DBi High Gain 22 Mimo Antenna PoE Adapter 2 RJ45 LAN Ethernet Port 2-Pack
CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional.
100Mpbs digital display bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable.
Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of....
TRENDnet AC1750 Dual Band PoE Access Point, TEW-825DAP, 1300Mbps WiFi AC+450 Mbps WiFi N, WDS Bridge, WDS Station, Repeater Modes, Band Steering, WiFi Traffic Shaping, Up to 8 SSIDs-16 Total, IPv6
AC1750 WiFi: This high performance AC1750 PoE+ dual band access point allows you to broadcast concurrent 1300 Mbps WiFi AC + 450 Mbps WiFi N networks.
BAND STEERING: Band steering with this AP alleviates network congestion by automatically directing wireless devices from the 2.4 GHz band to the 5 GHz band.
GIGABIT POE+ LAN PORT: : This access point comes with a gigabit PoE LAN port that maintains high performance connections to the wired network, and saves installation time and costs with gigabit PoE support.
MULTIPLE ACCESS POINT MODES: This access point features band steering which alleviates network congestion by automatically directing wireless devices from the 2.4GHz band to the 5GHz band.
LOW PROFILE DESIGN: The low-profile housing design of the indoor access point blends into most environments and includes a wall / ceiling mounting plate for flexible installation.
KuWFi 2-Pack 300Mbps Wireless Bridges, Wireless Outdoor CPE WiFi Bridge Kit Point to Point Wireless Access Point 2.4G Internet Bridge 1KM Transmission Distance Solution for PTP/PTMP(Pre-Program)
CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional.
100Mpbs digital display bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable.
Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of....