Sunnytech 0.5w 5v 100ma Mini Small Solar 1.25w 5v 250ma DIY Polysilicon Solar Epoxy Cell Charger B016-B019
...l and strong, anti-wind and snow, increase the service life of solar panels. Color coded wires with alligator clips make working with it easy and fun. For those of you who want to connect more than one panel together, this panel has two soldered tabs for permanent connections..
CONNECT SOLAR PANELS IN PARALLEL OR IN SERIES---- When the voltage of your solar panel doesn’t satisfy your storage battery, you can take two or more same solar panels together in series. Such as, two 5.5v solar panel connect together in series, so its voltage is 11V. When the voltage of solar panel satisfies your storage battery. In order to speed up the rate of charge, you can take two or more same solar panel together parallel connection..
BLOCKING DIODE INSTALLED ----A blocking diode installed already in the backside to protect the solar panel from over-charging and current backflow..
EDUCATION---- Solar panels are devices that absorb sunlight and convert solar radiation directly or indirectly into electricity through photoelectric or photochemical effects, it's perfect devices for science project..
Sunnytech 0.5w 5v 100ma Mini Small Solar Panel Module 2w 6v 330ma DIY Polysilicon B016-B031
...s that absorb sunlight and convert solar radiation directly or indirectly into electricity through photoelectric or photochemical effects, it's perfect devices for science project..
SUFFICIENT ENERGY---- High conversion rate, high efficiency output, excellent weak light effect..
CONNECT SOLAR PANELS IN PARALLEL OR IN SERIES---- When the voltage of your solar panel doesn’t satisfy your storage battery, you can take two or more same solar panels together in series. Such as, two 5.5v solar panel connect together in series, so its voltage is 11V. When the voltage of solar panel satisfies your storage battery. In order to speed up the rate of charge, you can take two or more same solar panel together parallel connection.
Runleader 12V/24V 36V 48V 72V Battery Fuel Gauge Meter,Battery Level Meter,Resettable TOT Hours,Lead Acid Battery Applicably(But Not Trojan),for Golf Cart Club Car Forklift Scrubber Machine Floor (1)
MULTIFUNCTIONAL METER---- It is a multifunctional meter which include functions of battery capacity meter and hour meter.
Display the battery capacity by LED bars, and display the total running hours by LCD screen.
Wide operating voltage:12V to 24V,36V,48V to72V..
BATTERY FUEL GAUGE---- It can be used on lead-acid battery (but not Trojian's)powered device to indicate the remain capacity.
there are 10 LED bars with 3 colors(red,green,yellow) to display,10% capacity per bars.
3 voltage pins for 12V to 24V,36V and 48V to72V.
It is only lighten the LED bar of current battery capacity whatever connect with key switch or direct connection..
HOUR METER(TOT)---- It also have function to track how many hours are the engine/machine working, hours read up to 999,999 hours with 0.1/1 hour resolution.
TOT hours can be reset, when replace it to another device, it will be restart from 0 also..
Snap-in design with panel cut-out size:Approx 43×39mm,φ50(1.69x1.54 inch,φ50)..
Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
ELING Warranted MPH GPS Speedometer Odometer 160MPH for Car Motorcycle Tractor Truck with Backlight 85mm 12V/24V
Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
9-32VDC(12VDC/24VDC) Working Voltage, Red Backlight, 1 year Warranty.
TTartisan Light Meter with Two Dial Electronic Camera Light Meter Hot/Cold Shoe Fixing Camera Photometer Photography Set-top Light Meter (Color Brass)
Retro look with very color: The body is entirely black when it's new. During the time of use, the black paint will gradually peel off, revealing the color of brass..
Compact and lightweight: The TTartisan meter is a small, lightweight accessory meter that weighs only 93g, it serves well for people who use older Leicas and similar rangefinder cameras..
Shoe-mount design: The meter conveniently slips into the camera's shoe while readings are taken..
Two dials: one for ISO and aperture and another one for shutter speed allow settings to be made..
LED indicator: A series of LEDs illuminate to tell the user when the correct measurement has been achieved. (Battery is not included in the product).
Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover + L&R End Caps)
Baseboarders Elliptus Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length..
Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseb....
Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (3 ft, Cover + L & R End Caps)
Baseboarders Premium Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboar....
Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover + L & R End Caps)
Baseboarders Premium Series Set includes one cover panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Ba....
