AISIN TKT-021 Engine Timing Belt Kit with Water Pump, grey
AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement.
The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time.
AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more.
AISIN is the #1 OE manufacturer of water pumps in the world.
each pump features an advanced diecast aluminum housing and premium internal components with carbon ceramic seals for superior durability.
Kit includes OE matched components: Water Pump, Timing Belt, Tensioner, Pulleys, Gasket, Seals, and Installation Instructions - all packed in one convenient box, ready to install.
Compatible with select vehicles (verify specific fitment details with fit checker above): LEXUS: 1998-00 GS400, 2001-07 GS430, 2003-09 GX470, 1998-00 LS400, 2001-06 LS430, 1998-07 LX470, 1998-00 SC400, 2002-10 SC430.
TOYOTA: 1998-07 Land Cruiser, 2001-09 Sequoia, 2000-09 Tundra.
Great lightweight top of the line sled for everyone who always wanted to try dog sledding.
Sold as a Kit with All Parts Included. Wood components are made of White Ash and left unvarnished. Holes are predrilled and all hardware is included. Plastic Components are also predrilled and ready for assembly. All you need is a Phillips Screw Driver and a 7/16" Wrench.
Can handle 400 pounds of basket weight plus a driver and is good for teams of 1-10 dogs.
The bolted design allows for the same great flexibility and maneuverability. Push on the handle in either direction and skis tilt for a turn or to hold the side of a hill. The bolted design also allows for easier modification or replacement of parts.
Length = 8' Brush Bow to Ski Tails, Height = 36" Ground to Handle Bar,Weight = 29 lbs. fully assembled. Foot Treads = 1-1/2" Wide 18" Long Seat = 40" Long 17" Wide. Brake = Aluminum Bar Brake/Drag Brake Combo.
Easy Install: Rampage soft top hardware and replacement components are designed for easy install.
Quality: Rampage products are designed to meet or exceed OE original soft top hardware components.
One Year Warranty: Our Rampage products are covered by a 1 year warrant providing customers with repair or replacements subject to certain common exclusions.
Rampage Jeep Parts: Count on Rampage to provide you with proven Jeep parts & accessories like bumpers, interior accessories, steps, & more for varying Jeep models.
Offroad Accessories: Get serious about off-roading with a variety of bumpers, trail gear & recovery tools to help you out of sticky situations. We offer tube doors, mirror kits, steps, rock sliders & other accessories.
Assemble and disassemble pen parts on one easy to use tool.
Acts as traditional pen press to press your pen parts together.
Disassembly function provides invaluable way to take virtually any pen apart.
Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning.
Sled mechanism slides the stop into position.
Locking lever then securely locks the rod in place.
The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips.
Dedicated 7mm bushing allows for disassembly of any 7mm pen.
Soft-grip tube and V-profile clamp provides parts protection during disassembly process.
BUY WITH CONFIDENCE: This genuine Aprilaire Humidifier Installation Kit was designed and manufactured in the U.S.A. by Aprilaire – the inventor of the Whole Home Evaporative Humidifier, and the leader in indoor air quality solutions, to optimize installation of Aprilaire Whole Home Fan Powered Humidifiers with Manual Control..
COMPLETE INSTALLATION KIT: No need to find the parts yourself! This kit contains all components for installation of an Aprilaire Whole Home Fan Powered Humidifier with Manual Control, model 700M. Reference installation instructions and template included with every Aprilaire Humidifier before installing..
HUMIDIFIER MOUNTING COMPONENTS: (4) Mounting Screws attach Humidifier to furnace air supply or return duct.
HUMIDIFIER PLUMBING COMPONENTS: ¼" outside diameter (OD) Water Supply Tube (25 ft.) connects Humidifier to a water source, ½" interior diameter (ID) Drain Tube (15 ft.) connects Humidifier to floor drain, and ⅝" Hose Clamp fastens Drain Tube to drain connection.
HUMIDIFIER ELECTRICAL COMPONENTS: Aprilaire Current Sensing Relay Model 50, 18/2 Thermostat Wire (10 ft.) connects Manual Control to Humidifier, and (4) Twist-On Wire Nut Connectors.
DESIGNED EXCLUSIVELY FOR USE WITH MEDELA’S SONATA BREAST PUMP: These spare membranes are made for use specifically with your Sonata breast pump.
refer to Sonata’s instructions for use for complete cleaning and sanitizing instructions before first use.
SPARE MEMBRANES MEANS YOU ALWAYS HAVE CLEAN PARTS ON HAND: Extra silicone membranes are ideal to keep as convenient and easily accessible spares for when you need them most – whether you need clean parts or you’re replacing damaged or worn membranes.
AUTHENTIC MEDELA SPARE PARTS: These authentic Medela replacement parts are engineered with the quality materials and workmanship that moms expect – Inauthentic spare parts may vary significantly in terms of design, which can impact pump performance.
MADE WITHOUT BPA: All Medela replacement parts, accessories, and breast pump components that come into contact with breast milk are – and have always been – made without BPA.
【Wide Compatibility】Handles all popular OE and aftermarket components, including Horton pin and bushing components. Services bushings with diameters from 1-1/4 inch through 1-7/8 inch and pin diameters from 7/8 inch through 1-1/8 inch.
【Function】 Provides 10 tons of hydraulic force for quick and easy removal and installation of truck front spring eye bushing assemblies.
【Superior Quality】 Made of premium steel material, durable and sturdy, not easy to wear, providing a long service life. Coated with a finish for rust and corrosion resistance, hardened construction for high strength and impact resistance..
【Easy Storage】Provide a heavy-duty tool case for storing and organizing parts. No need to worry about parts loss, easy to carry, the case would provide a better user experience.
【Satisfactory Service】 If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk !.
NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality All components are 100% NEW to provide improved performance.
Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle.
Key components are greased to ensure long term reliability in harsh conditions.
All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit.
Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind.
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional Premium aftermarket replacement part.
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models.
beyerdynamic DT 880 Premium Semi-Open Over Ear HiFi Stereo Headphones (250 Ohm Premium, Black (Limited Edition))
The Classic among HI-FI Headphones: Music lovers delight in its natural, vibrant sound as well as its excellent spacious reproduction..
The semi-open headphones attenuate ambient noise, but do not exclude it completely, and thus convey a harmonious sound experience. The DT 880 have been produced for over 20 years and enjoy industry leading audio quality and reliability. All components are available as replacement parts making the DT 880 a reliable companion for many years to come..
The DT 880 stands for quality "Made in Germany". We only use the best quality parts for these over-ears, which we hand craft in Germany with great care and attention to detail. Many of the parts can also be exchanged and replaced, so you are guaranteed a product that will endure into the future..
Ideal Use: The 250-ohm headphones were developed primarily for use at home on a stereo system..
In the Box: DT880 Premium 250 Ohm Headphone, Hardshell Carrying Case, and 1/4" Gold-Plated Screw-on Adapter.
Adjustable Headband ensures a tight clamping force which can be adjusted to your comfort..
