MUSETEX ATX PC Case with 6 Pcs 120mm ARGB Fans, Computer Gaming Case Mid-Tower Phantom Black, Tempered Glass Computer Chassis, USB 3.0, MN6-B
...t other brands can't let you experience - let the light sync with your music by turning on the music mode. The color of the ARGB fan changes with the sound of your music or game, and enjoy the fusion of visual and auditory pleasure!.
6 ARGB Fans - The MN6 case comes pre-installed with 6 ARGB fans, providing superior cooling performance. The more powerful ARGB comes in 16.8M colours and is motherboard SYNC with the MUSETEX dedicated ARGB control board pre-installed in the case. More color and fun can be to play with than normal RGB!.
Brilliant Customizable Lighting - Addressable ARGB LEDs controlled with 3 methods. 1.Remote Control: MN6-B PC Case is equipped with a unique music panel, music sync.
2.LED Button Control: 19 lighting colors for LED button on the I/O panel.
3.Motherboard Control: Only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized. (Note: 12V 4PIN motherboard is not suitable for motherboard control, Button control is recommended.).
Well-engineered Airflow - MUSETEX PC case MN6-B are pre-installed 6 pcs 120mm ARGB fans to provide lighting, utilizing anti-vortex vanes to ensure proper airflow inside the case to achieve better cooling performance than ordinary PC case..
Aigo Halo Ring LED Case Fan 140mm 14cm Quiet Edition Sleeve Bearing High Airflow Silent Cooling Fan for Computer Cases, CPU Coolers, and Radiators (140mm, Triple Pack White)
Four LED Colors Available: As a excellent LED cooling system, It has four LED color for customer choose: Red/White/Blue/Ice Blue, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light..
Features standard 140mm mounting holes : 140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency..
Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1500RPM at low 29dBA and deliver an air flow of up to 49.8CFM.
Anti-vibration Mounting System: The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA.
IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time..
MUSETEX ATX PC Case Pre-Install 6 PWM ARGB Fans Polygonal Mesh Computer Gaming Case Opening Tempered Glass Side Panel Mid-Tower Case USB 3.0 x 2 Black NN8
...gurable PWM ARGB Fans Pre-installed- (1) Ensure your motherboard has a 3PIN rgb interface and use the motherboard lighting software to control the fans, each addressable ARGB fan can offer 16.8 million colors of special customizable lighting. (2) Adjustable speed PWM fans allow pc case for better silence and better cooling depending on demand. Also the fan with new upgraded bearings greatly extends the service life. Easy disassembly operation facilitates PC hardware assembly..
Expensive Glass Side Door - Not only is it more stylish than other brands of gaming cases, but it also solves cooling problems much better. Tempered glass side panel with metal pull ring and magnets that can be opened at any time for 76% better cooling than non-side-opening mid-tower pc cases. Easily install internal PC components and place any hand puppet you like. Add to the fun!.
Large-space ATX mid-tower case - Meets the installation needs of over 95% of customers. Plenty of room to easily install the top 280 water drain without touching the memory sticks. Plenty of space for cable management in case, provides multiple HDD mounting slots, large storage capacity, maximum capacity 5*SSD+1*HDD/4*SSD+2*HDD..
Meet the installation needs - the chassis provides a variety of graphics ....
GIM ATX Mid-Tower PC Case Black 10 Pre-Installed 120mm RGB Fans Gaming PC Case 2 Tempered Glass Panels Gaming Style Windows Computer & Desktop Case USB 3.0 I/O Port, Water-Cooling Ready (Black)
【Powerful Cooling System】10pcs 120mm GIM ARGB fans are pre-installed for the case to provide lighting and excellent air performance at the same time, keep cooling. And GIM Gaming Case supports ATX, Micro-ATX and Mini-ITX motherboards. (The actual fans you received may change depending on the shipment batch).
【More Space】Gaming pc Case has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
【ARGB Lighting System】: Mid-Tower ATX Gaming PC Case comes with 10 GIM KB-11 RGB case fans(120mm white Addressable speed adjustable fans) and 1 RGB Backplate and 1 GIM hub. The ARGB lighting system can be controlled via the include remote, create an amazing lighting show while providing great cooling..
【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where....
Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches
PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.
Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)
4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
WMYCONGCONG 10 PCS 10' 4 Pin Fan Extension Power Cable Computer PC Fan Power Extension Cable for PWM Fan Computer ATX Case
4-Pin male to female fan extension cable, compatible with 4pin PMW fan connector and 3pin fan connector..
High quality 4 pin fan splitter cable, offers greater flexibility for positioning motherboard and CPU Fans for optimal cooling, for extending fan cables in your case..
The fan extension cable is one 4-pin female connector to 4-pin male connector, suits for CPU or PC case fan..
Pacakge Content: 10 * for 4 Pin Fan Extension Cable..
ID-COOLING FH-07 SATA Powered Fan Hub with 7 PWM Ports Hub Splitter for 4-Pin & 3-Pin Computer Internal Fans
【1-to-7 PWM Fan Hub】The fan hub splitter can support up to 7 fans. The extension cable offers greater flexibility between motherboard and CPU cooling fans..
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of “Fan 1” can be identified by the system. Speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
【Widely Compatible】 The 1 to 7 splitter provides power supply and connectors for PC computer case internal fans..
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..
2 Pack 4-Pin Molex (Actual 2-Pin) to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power Cable
Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
4 Pin Molex (Actual 2-Pin) to 2 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
Power two 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin fans, Fans will be operated at the fixed Molex voltage of 12V.
2 Pack 4-Pin Molex to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power (Molex-3Pin/4Pin Cable (Splitter)).
ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter
【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans..
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans..
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..
