Best Pcb Terminal

Electronics-Salon DIN Rail Mount AC/DC 24V Control 8 SPDT 16Amp Pluggable Power Relay Module, G2R-1-E

  • OMRON G2R-1-E industrial power relays, switching current up to 16A at 250VAC (or 30VDC), and easy to replace pluggable relays..
  • LED indicator for each relay channel , relay coil protection by means of a freewheeling diode..
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers..
  • Panel mount or DIN rail mount versions are available. Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
Check Stock

Gratury Junction Box, Hinged Cover Stainless Steel Latch IP67 Waterproof Plastic Enclosure for Electrical Project Includes Mounting Plate and Wall Bracket 290×190×140mm (11.4\×7.5\×5.5\)

  • Weatherproof & waterproof designed enclosure box, suitable for harsh outdoor environments or indoor industrial applications.
  • Includes a mounting panel for easy installing PCB board, terminal or any other electrical components which need to be fixed on.
  • Simple hinged cover, easy open and close, stainless steel latches can keep a good watertight.
  • High-grade ABS material, lightweight and sturdy, cable outlets can be easily drilled.
  • Safety lockable design to prevent un-authorized openings.
Check Stock

Gratury Junction Box Hinged Cover Stainless Steel Latch IP67 Waterproof Plastic Enclosure for Electrical Project with Mounting Plate and Wall Bracket 400×300×180mm 15.7 ×11.8 ×7.1

  • Weatherproof & waterproof designed enclosure box, suitable for harsh outdoor environments or indoor industrial applications.
  • Includes a mounting panel for easy installing PCB board, terminal or any other electrical components which need to be fixed on.
  • Simple hinged cover, easy open and close, stainless steel latches can keep a good watertight.
  • High-grade ABS material, lightweight and sturdy, cable outlets can be easily drilled.
  • Safety lockable design to prevent un-authorized openings.
Check Stock

XL Electronic Component Kit Assortment, Capacitors, Resistors, LED, Transistors, Diodes, Zener, Potentiometers, Cutter, LCR-T4 Component Tester, IC Box, 1870 pcs

  • 760 pcs Resistor, 380 pcs Capacitor, 170 pcs Transistor, 100 pcs Diode, 125 Zener Diode, 200 pcs 3mm 5mm LED, 9 pcs Potentiometer, 4 pcs PCB, 15 pcs Header, 15 pcs Terminal, 25 pcs Photoresistor, 70 pcs IC, 1 Cutter.
  • In this Assorted Kit each different component is packaged in a thick durable poly bag and each different type of component is labeled or stamped accordingly.
  • Total 1870 pcs Components, includes 1 Component Tester (can test Resistors, Capacitors, Diodes, Transistors, Inductors, Triodes, Thyristors) and 1 IC Box.
  • The Assortment comes in stable cardboard box.
  • Save time and money, almost everything that you will ever need is included in this Assortment.
Check Stock

ACEIRMC 5pcs 4A 2S 18650 Lithium Protection Board BMS Li-ion Battery Lipo Cell Charger Protection Module Overcharged Overcurrent Protection 7.4V 8.4V

  • Upper Limit Operating Current:4A.This protection board uses a lithium photopolymer rechargeable battery protection IC..
  • Built-in high-precision voltage detection circuit.
  • The terminal connected to the charger is a high withstand voltage device.
  • Built-in three-stage overcurrent detection circuit (overcurrent 1,overcurrent 2,load short circuit)..
  • 4A BMS 2S 2 Cell Series Li-ion 18650 Lithium Battery Charger Protection Board 7.4V DIY Kit Electronic PCB Board Module.
  • Function:Overcharge protection,over discharge protection,short circuit protection,overcurrent protection..
  • Package included: 5 x 2S 4A 18650 Lithium Protection Board..
Check Stock

DEVMO 28 Pins Jamma Harness Cabinet Wire Wiring Loom for Arcade Game PCB Video Board Machine Video Consoles Jamma Pandora Box 4 5 6

  • ★Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs. 5 Foot Length..
  • ★All wiring uses 22AWG ,Cheaper harnesses will only use 24AWG or 26AWG. The problem is if the resistance of wire is too high, it can cause a significant power loss before the DC voltages even reach the JAMMA PCB..
  • ★Fast connection to power supply with attached terminal forks for all voltages (+5VDC, +12VDC, -5VDC, GND).
  • ★Video signals connect through included standard monitor connector..
  • ★Full Grounding Loop for all those joystick/button micro-switches on your control panel..
Check Stock

CZH-LABS DIN Rail Mount 8 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 8 Channels

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp (< 10 seconds). Isolation: Phototriac. Zero cross: Yes..
  • Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers..
Check Stock

YXMY2020 Benchtop Digital Resistance Tester AT512 High-Precision DC Resistance Meter Low Micro Ohm Meter Tester 0.1u-110M Ohm with RS232 Handler Comparator for Testing Various Electronic Components

  • Measure from very low (0.1μΩ) to very high (110MΩ) with single instrument..
  • Along with capabilities for fast, precise measurements over a broad resistance range, AT512 also provides functions for comparator and PLC interface. Employing a four-terminal measurement method, AT512 is particularly suitable for measuring the resistance of motor and transformer windings, relay, switch and connector contacts, PCB patterns, inductor DC resistance and in shipping inspection tests..
Check Stock

NOYITO 2-Channel 5V Computer USB Control Switch Relay Module Drive-free relay module Plug and Play Suitable for PC Smart Controller

  • The module uses HID technology, without any driver, plug and play. Support WIN7,10, XP 32-bit, 64-bit system, easy to use simple..
  • Onboard square USB interface, stable connection.
  • use of high-performance USB control chip.
  • use dedicated relay driver chip ULN2803, relay work more stable.
  • Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state..
  • 【NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply. 】PCB size: 56.5mm * 40.6mm, fixed hole size: 3mm, fixed hole center moment: 52.2mm * 36.6mm..
Check Stock

Amplifier, DROK 2.0 Channel 15W+15W 8-24V 8Ω Stereo Amplifier Board, 5.0 Audio for Headset Speaker Home Sound System DIY

  • Parameter --- Working Voltage: DC 8-24V, Output Power: 2x15 Stereo(24V/8Ω), Dual Channels Recommended 6/8/16Ω Speakers, Can be Powered by 9V 12V 18V 24V..
  • Input --- This Amplifier Board Supports Three Types of Input: 5.0 Audio Input.
  • Features --- MUTE/GND Port, Short Circuit This Port Can Achieve Mute.
  • Two 3300UF Professional Large Capacity Audio Filter Capacitors.
  • Protective Panel: Same Material with PCB, Easy to Install, and Bring A Comfortable Sense to Use..
  • Protection --- Input Anti Reverse-Connect Protection, Output Short Circuit Protection, Over Current Protection (OCP), Over Temperature Protection (OTP), Low Voltage Protection (LVP).
  • Warranty Guarantee --- 1 Year Long-Term Warranty Guarantee Since Purchased the Product..
Check Stock