PCI-E Riser Express Cable 16X to 1X with 4pin Power Graphics Extension Ethereum ETH BTC Mining Powered Riser Adapter Card+60cm USB 3.0 Cable (4P)
PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
Note:If you have any questions,please contact us asap,and we will try our best to help you.
10/100/1000Mbps Gigabit Ethernet Converged Network Server Adapter Card (NIC) with Intel 82576 Controller Chip, Dual RJ45 Copper Ports, Compatible for Intel E1G42ET, PCI Express 2.1 X1
Ultra Fast Speed— High-performing Dual RJ-45 ports 10/100/1000Mbps let you connect to network cable and upgrade your ethernet speed to gigabit easily. PCI Express* 2.1 (2.5 GT/s), fits for PCI-E X1, X2, X4, X8, X16 Slots.Compatible extensions to PCI power management and ACPI..
Stable Performance— Equipped with original Intel 82576 controller chip built for high-performance computing. Support 9.5 KBytes (Jumbo Frames), VPD, VMDq, PC-SIG SR-IOV, DMTF NC-SI passthrough, SNMP, RMON, iSCSI boot, PXE, VLAN, Wake-on-LAN. Packet recognition and wake-up for LAN on motherboard applications without software configuration..
Comprehensive System Support— Supports Windows 7/8/2000/XP/Vista/Windows Server 2003/2008/2012.
OS Independent Vmware ESX (Does not support VMware ESXi 7.0 or above)..
Low-Profile and Full-Height Brackets— Low profile and standard profile bracket inside works with both standard and mini size computer case/server..
Industry Leading Support— 3-year warranty and free 24/7 technical support..
BEYIMEI PCI-E 1X to 4 Ports PCI Express 1X Slots Riser Card,USB3.0 Converter Extender Adapter Card,M2 Expansion Card PCIe Port Multiplier Card for Ethereum Mining ETH
⭐This riser card can expand the PCI-E 1X slot on the motherboard into 4 PCI-E 1X slots, thereby solving the problem of insufficient motherboard slots..
⭐The 4PIN and SATA interfaces enhance the power supply capacity, thereby reducing the burden on the motherboard..
⭐This adapter card is a hardware adapter, driver-free, plug and play..
⭐It consists of two parts, one is the main card, which is installed on the motherboard through the PCI-E x1 interface, and the other is the device card, which has 4 PCI-E x1 and is connected through a customized USB 3.0 cable,for transfer between PCI-E and PCI-E..
⭐The 4 expansion 1x slots are all in GEN2 mode, even if they were in gen1 mode before. It is a good choice for old motherboards..
EDUP Gigabit Ethernet PCI Express PCI-E Network Card 10/100/1000Mbps RJ45 LAN Adapter Converter for Desktop PC, Model Number: EDUP-EP-9602
Gigabit PCI network card suitable for any phi-enabled client, server or workstation, The Gigabit Ethernet network adapter card Supports high Performance Dual channel networking. And maximum data transfer speeds of 1000Mbps in each direction. Up to ten times faster than 10/100 Ethernet..
Network adapter card fits any PCI Express x1, x2, x4, x8 or x16 socket. You can add a 10/100/1000Mbps Ethernet port to any PC through a Pie slot. Additional 8cm low-profile bracket provides the option for installation in small size HTPC case. Important Note: only work with PCI-E slot, not for PCI slot..
Gigabit network card fully compliant with IEEE 802. 3, IEEE 802. 3U, IEEE 802. 3x and IEEE 802. 3ab standards. Supports a broad range of operating systems, including Windows 10/8. 1/7/Vista/XP/2003/2000. (You can download driver From EDUP website.
Network card: If you are not satisfied with this network card, Please feel free to Contact us via email: message or 18033060667@163. We will offer you a full refund or new replacement..