Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4
Vertical Graphics card holder for O11Dynamic XL with PCI-E 3.0 Riser Cable.
"NOT" Compatible with PCI-E 4.0 VGA Card.
5 slots offer builders more installation options.
Included PCI-E Riser Cable , allows you to mount a PCI-E 16X Card..
In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow steps to set up your BIOS to make it compatible..
ACTIMED PCIE Riser 1X to 16X GPU Riser (6PIN/MOLEX/SATA Powered) 10 Capacitors, PCI Express Risers Adapter Card for BTC/ETH/GPU Mining Rigs, with 60cm USB 3.0 Cable and LGB-7 Color Lights, 6 Pack
【Making Mining Easy】The ACTIMED PCIE Riser provides the perfect solution for connecting multiple GPUs to your motherboard's PCIE slots, extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on BTC Ethereum Mining rigs or GPU Mining rigs..
【10 High-quality solid capacitors】10 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4-8 capacitors, the graphics card power supply can be more stable and safe. effectively solving the problem of insufficient power supply capacity.Build in electric circuit protector keep device away from over current, over heat and over voltage..
【3 power supply methods】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
TeamProfitcom Dual Mini 6 Pin to 8 Pin PCI Express Video Card Power Adapter Braided Sleeved Cable for Mac Pro Tower/Power Mac G5 15-inches
Connector 1: standard GPU 8 Pin male . PCIe 8 pin male end to plug into the video graphics card - photo #2.
Connector 2 : 2x mini 6 pin male ( not standard 6 pin male) !!! Dual mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size) !!! - photo #3, photo #4.
Compatible with Power Mac G5 and all Mac Pro Models including: (1,1) - (5,1) or (2006) - (2012).
Connects a PCIe video graphics card with GPU 8 pin port to Mac motherboard with mini 6 pin port.
This cable was only designed for Mac Pro models as listed in the 2nd Point !!! Please check your PC type or contact us if you are not sure about it..
16 AWG GPU VGA PCI-e 8Pin PCI Express Graphics Video Card GPU VGA 8 Pin Female to Dual GPU 8 6+2 Pin Male Splitter Power Sleeved Extension Cable 8 Pin GPU 12-inches TeamProfitcom
100% GPU- 2x PCIe adapter cable splitter.
Genuine new copper cores, no recycled materials.The length of the product(Approx): 12-inches.Gauge: standard....
8 Pin GPU female to 8 Pin PCIe male adapter cable provides a convenient solution for supplying video graphics card power with an 8 pin connector for....
A female end to connect to the power connector of the power supply and two male ends to plug into the video graphics card.
Compatible with 6-pin & 8-pin graphics cards from popular manufacturers from ASUS,ASRock,Radeon,AMD,Sapphire,EVGA and Gigabyte.
ATTENTION PLEASE: the product is supplied ONLY in the exclusive packaging of the manufacturer - the brand name "TeamProfitcom" as shown in the product....
LIANSHU 3Pack 6 Pin PCI-e to SATA Power Cable - 8 Inches
LIANSHU 6 Pin PCI-e to SATA Power Cable - 8 Inches ,SATA15Pin M To 6Pin HSG.
Cable material: ULStandard. 18 AWG Full 100%Copper.
PCI EXPRESS VIDEO CARD POWER CABLE Adapter Connects A PCIe Video Card To A Power Supply With A Spare SATA Power Connection,PSU UPGRADE SAVER Power Cable Provides An Option For A Power Supply Without A PCIe Connection For GPU Power..
HSG 6 Pin PCIe To 15 PIN SATA Female To Male Cable Provides A Convenient Solution For Low Power Video Graphics Card That Can Be Powered From A Single SATA Power Connection.STURDY GRAPHICS CARD Power Cable Has A Male SATA Connector With Keyed Rails And A Female PCI Connector With A Latch For A Secure Connection On Each End To Prevent Accidental Disconnections.
VIDEO GRAPHICS CARD Compatible With Graphics Cards From Popular Manufacturers From ASRock, ASUS, EVGA, And Gigabyte.
Segotep 750W Power Supply, PCIe 5.0 Full Modular 80 Plus Gold PSU ATX 3.0 Gaming Power Supply, 12VHPWR Cable, Silent Fan
ATX 3.0 & PCIe 5.0 Ready: The PSU can hold up to 200% total power excursion & 300% GPU power excursion, it is more stable and secure than traditional ATX 3.0 power supply..
80 PLUS GOLD Certified: The 750 Watt Power Supply 80 Plus Gold provides ultra-high power efficiency of 91.8% at typical load, reducing heat in your computer's system and prolonging its life..
Fully Modular Cable Design: The fully modular power supply allows use of only the cables you need for reduced system clutter and improved air flow..
Native 12VHPWR Cable: It can generate up to 600W of power to PCIe 5.0 graphics cards, DC-DC structure, Full Bridge LLC resonance assist, 12V synchronous rectification provide stable & safe output..
Graphics Cards Support: It comes with 2x PCIE 4.0 ports support NVIDIA RTX 20/30 Series and AMD graphics cards, 1x PCIE 5.0 port support NVIDIA 4080/4070Ti graphics cards..
EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White
New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
SinLoon PCI-E Express X16 Riser Extend Card PCIE 3.0 Cable Card Extension Port Adapter High Speed Riser Card Compatible with GTX RTX Series, Radeon Series Graphics Card (Balck 100mm)
STABLE SPEED PCIE 3.0 EXTENSION CABLE：Stable PCIe Gen3 8Gbps or higher with high quality Axial Cable which is extremely and compact . Extremly High speed cable Compatible with most GPU/motherboard components..
ADVANCED SHIELDING & DURABILITY: EMI shielded design can reduce electromagnetic interference and provide good transmission efficiency，Achieve high frequency and low attenuation.new material PCIE Riser cable with higher stability..
HIGH QUALITY: Solder Points and Gold plated Contacts ,with super strong corrosion resistance. Dustproof cap, which enhances the product insertion and insertion and good electrical performance,for the better connectivity and Long Use..
EASY TO USE: Easy to install it ,small dimension is crafted for Space-Saving.convenient and fast..
FEATURES: High Speed Transmission in PCIE16x 3.0, High Speed Cable, features extremely fast graphic data transmission up to 8 Gbps and beyond, output without FPS drops, works flawlessly. Supports PCIE3.0/2.0/1.0, Don't bend cable excessively, which will cause poor signal..
EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black
New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
