ASUS Republic of Gamers Rampage V Edition 10 LGA 2011-v3 EATX Motherboard
...g, and front-panel jack-retasking- Optical S/PDIF-out port on back panel.
ProcessorIntel Core i7 processors for the LGA 2011-v3 socket.
Memory- 8 x DIMMs, up to a maximum of 128 GB, DDR4 3333 MHz (OC)- Quad-channel memory architecture- Intel Extreme Memory Profile (XMP) supported.
Expansion Slots- 4 x PCIe 3.0/2.0 x16 slots (supports x16, x16/x16, x16/x8/x8, x16/x8/x8/x8 or x8/x8/x8/x8 mode with a 40-lane CPU.
x16, x16/x8, x8/x8/x8 mode with a 28-lane CPU)- 1 x PCIe 2.0 x4 slot- 1 x PCIe 2.0 x1 slot.
Multi-GPU SupportUp to 4-way/3-way/quad-GPU NVIDIA SLI and AMD CrossFireX.
Storage- 1 x M.2 Socket 3 with M-key, type 2260/2280/22110 (PCIe storage devices only)- 1 x U.2 port (supports PCIe 3.0 x4 NVM Express storage)- 10 x SATA III 6 Gb/s ports.
Networking- Intel I218-V and I211-AT Gigabit LAN- GameFirst technology and ASUS LANGuard.
USB- 4 x USB 3.1 ports (2 Type-A and 2 Type-C ports, all on the back panel)- 8 x USB 3.0 ports (4 on the back panel, 4 at mid-board)- 6 x USB 2.0 ports (2 on the back panel, 4 at mid-board).
PCIe SATA Card 4 Ports 1X, PCI Express SATA 3.0 Controller Expansion Card 6 Gbps, SATA 3.0 PCIe Card SATA III Gen3 Adapter Riser Card with 4 SATA Cables &Low Profile Bracket Support 4 SATA 3.0 Devices
✅PCIE 3.0 GEN3 SATA 2-port expansion card, provides 2 SATA 3.0 ports and 2 SATA cables, and supports SATA 3.0 version transfer speeds up to 6 Gbit/s..
✅【Product Chip: PCI-E 3.0 GEN3 Chipset: JMICRON + JMB582, improve the stability and compatibility of PCIE SATA card. Support IDE/AHCI programming interface..
✅【Simple installation, plug and play, support hot swap. Just plug it in and start working..
✅PCIE 1X SATA card, compatible with PCIE1X/4X/8X/16 slots. The card also features a heatsink for long-lasting high temperature resistance..
✅Compatible system: Windows7/8/10/XP/2003/2008/Linux. Please let us know if you have any questions..
BEYIMEI PCIe 4X SATA Card 6 Ports,SATA III 6 Gbps Controller Expansion Card, ASM1166/SATA 3.0 Non-Raid,with 6 SATA Cables, (Support 6 SATA 3.0 Devices)
* Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable..
* SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster)..
* 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data..
* Multiple Operating Systems Support : Adopt imported solution ASMedia ASM1166/SATA3 solution. It can support multiple operating systems:Compatible with Windows / 8 / 10 / synology /Ubuntu /Linux..
*Package includes 1 * PCIe SATA 3.0 controller card , 6 * SATA cable and 1x 15pin SATA power splitter cable,1* Standard Profile Bracket,1* Low Profile....
▶【10 Ports SATA 3.0 Adapter Card】: With this PCIe SATA card, you can add 10 SATA 3.0 6Gbps devices to your computer (No need to install a driver and contact the seller if need the driver).
▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
▶【Supports 】: Supports Windows XP/8/10 / MAC / NAS / Ubuntu(Not recommended to use win 7, it may be stuck).
▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
▶【Note】: The 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips..
iecables SCSI Adapter CN50 Male to DM50 Female - Molded
[U.2 to PCIe Adapter] Extending an U.2 (SFF-8639) Interface on your desktop or server for 2.5" U.2 NVMe SSD, or you may need install an 2.5" SATA SSD to original SATA 3 Port sometime. This U.2 to PCIe 3.0 x4 Adapter meets both of your requirement.
[Bandwidth PCI-e 3.0 x4 ] Compatible with PCI Express 3.0 x4/x8/x16, ensure your 2.5" U.2 NVMe SSD runs in full performance. Backward Compatible with PCIe 2.0/1.0, the speed will be slower.
[Installation]1. When install 2.5" U.2 NVMe SSD, only PCI-e slot needed 2. When install 2.5" SATA SSD, SATA data cable needed to be connected.
[Please Note] 1. It can not be as a system disk if MOBO does not support NVME protocol, only as a storage disk 2. Please install WIN10 system.
It may need install driver if WIN7, and the speed may not be improved.
[Package including] 1x U.2 NVMe to PCI-e Adapter , 1x SATA3 Cable, Mounting Screws for SSD.
SupaHub SATA Card 8 Port, Non Raid SATA Expansion Card for SATA III 6G Hard Drives for Desktop, Includes 8 SATA Cables and 2 SATA Splitter Cables
Non-Raid 8 Ports SATA Card: This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. The BIOS of DELL and Lenovo motherboards will shield the third-party adapter card, do not order this SATA controller card if you use the motherboards of these two brands..
Two chips: The use of these two chips enhances heat dissipation, durable high temperature resistance, and more stable operation..
Operation Systems & Driver: Supports Windows 7/8/10. Please install the drivers, otherwise some problems may occur such as "does not work", "Only some ports work", "Only a few indicators are on", "The slot is empty” or “It’s incompatible”. Contact us if you need for the link to download the driver..
Interfaces: Supports PCI-E x1, x4, x8, x16. PCI slot is incompatible. You should power off the SATA PCIe card before inserting it into the motherboard or removing it..
Everything But Stromboli SSD Enclosure Case for SATA 2.5 Hard Drive/Solid State Drive USB 3.0 Cable Tool Free Type Works with Samsung PNY Kingston SanDisk 9.5mm x 2.5 Inch HDDs or SSDs
This single unit 2.5 Inch Hard Drive Enclosure is perfect for your business, IT Department, home computer, or gaming set-up. Box Includes (1)....
Easy, Tool Free installation – simply open case and insert 2.5 Inch SATA HDD or SDD. This product is designed for standard size disk of max 9.5mm....
SATA III Enclosure for SSD or HDD: Enclosure is optimized for Sata III, backward compatible with Sata I and Sata II.
USB 3.0 Enclosure for SSD: 3.0 USB Speed Cable to connect your SSD/HDD from your SATA Enclosure to your USB port on laptop, desktop, Windows, Mac,....
Enclosure for Samsung SSD, Kingston SSD, PNY SSD, SanDisk SSD - Works with/Compatible with Samsung SSD 860 EVO 2.5 Inch SATA III Internal (250GB,....
M.2 NVME SATA SSD Enclosure Adapter Tool-Free, RTL9210B Chips, USB C 3.1 Gen 2 10Gbps NVME, 6Gbps SATA PCIe M-Key(B+M Key), Support UASP Trim for SSD Size 2230/2242/2260/2280
【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you use m.2 solid state drive SSD, you need to format the disk. It will Safe for your Memory data..
【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. Note: NVMe and SATA SSD are not included. NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Applicable to sizes 2230/2242 / 2260 / 2280 solid state drivers..
【Support System】NVME SATA Enclosure Compatible Multi OS, Windows, Mac OS,Linux ,Android. Support UASP / Trim with ultra fast transmission speed. Supports Plug & Play and Hot-Swapping. Fits storage up to 2TB(no included)..
【Aluminum Thermal Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption. Includes both USB Type-C and USB 3.1 (Type-A) cables..
SATA III Cable,Electop 6Gbps Straight HDD SDD Data Cable, SATA 3.0 Nylon Braided Cable with Locking Latch for SATA HDD, SSD, CD Driver, CD Writer(20 Inch, Black,5 Pack)
SATA III Cable:With Newest version of SATA 3.0 data cable, you can easily applied it in connecting motherboards and host controllers to internal Serial SATA hard drives and DVD drives,which can quickly add expanded storage for your computer.SATA III backwards compatible with SATA I and SATA II..
6Gbps Data Transfer: Finish 1GB file transfer in 5 seconds with 6Gbps High-speed data transfer speed,fully compliant with the SATA III specification, 2x faster than SATA II..
Cost-effectively : Comes in 5 Packs once of a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration or a last minute installation or to fix troublesome connection problems..
Universal Compatibility: Widely Compatible with 2.5” SSDs, 3.5” HDDs, optical drives, RAID controllers, embedded computers and controllers. Support ALL popular SATA equipped device in market with SATA HDD, SSD, CD Driver, CD Writer. If not sure the compatibility,just contact us via email for quick problems solving..
Easy to Use:Plug in and Play, no any software installation required.Compatible with your Internal Serial ATA hard drives, Hard disk, recorders, CD-ROM etc.
PLEASE NOTE: Data Cable ONLY,NOT for power supply. When applied it to use,please power it or prov....