Best Pcmcia To Rs 232

DTECH DB9 RS232 Serial Cable Male to Male Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)

  • 1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 male RS232 cable with AL foil.
  • DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • Simple Serial Null Modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • (Not VGA-CABLE) Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded rs232 extender cable with AL foil.
  • DB9 male to female crossover adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short DE9 serial extender cord m/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (15 Feet, Black)

  • 15ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female extender with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid extension connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 15 feet long null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)

  • 1.5ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like PTZ, scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

  • BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
Check Stock

A&D Weighing MX-50 Moisture Determination Balance, 51g x 0.001g, 115 V

  • Weighing Units: % moisture, % solids, wet-dry, dry-wet, g.
Check Stock

A&D Weighing FZ-200i Internal Calibration Toploading Balance, 220g, 115V

Check Stock

DTECH DB9 to DB9 RS232 Serial Cable Male to Male Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • (Not for computer monitor VGA-video connection) Simple serial null modem cable (3 wire type and no hardware handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a DE9 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded rs232 cord with AL foil.
  • DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short serial adapter male to male for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipmentrs.
Check Stock

DTECH FTDI USB to Serial Adapter Cable RS232 DB9 Male Port FT232RL Chipset Supports Windows 11 10 8 7 and Mac Linux 1.5 Feet

  • It's Male Serial to USB cable (9 pin com port to USB A male) that allows your PC to connect RS-232 serial devices and programs that communicate....
  • FT232RL USB to serial adapter is designed for connecting serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanner,....
  • 1.5ft short USB to RS 232 cord for Windows 11, 10, 8.1, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later.
  • FTDI USB to serial cable adapter is built with a high performance quality processor chip (FT232 Chipset), which makes it one of the most reliable com....
  • DB9 serial to USB converter with LED light helps you check the connection status easily.
Check Stock

8x8 HDR 18GBPS HDbaseT 4K HDMI Matrix SWITCHER 6 PoC Receivers HDMI 2.0a 2.0 CAT6 CAT5e HDMI HDCP2.2 Routing SPDIF Audio CONTROL4 Savant Home Automation

  • 18GBPS HDR 4K 60hz YUV444. Supports all forms of surround sound including Dolby Atmos, Dolby Surround, 5.1 - 7.1 - 11.1 - 5.2 - 7.2 - 11.2, 2 Channel....
  • 6 HDbaseT Receivers with Bi-Directional IR, RS232, and Power over Cable!.
  • Web Control with ANY PC, Apple, or Android Device! Includes 6 HDbaseT PoC Receivers (230ft Distance Range) that don't need any additional power.
  • RS232, IP, and IR Remote Control! Guaranteed compatibility with Crestron, Savant, Control, or any other RS232 system. We have a Crestron, Control4,....
  • 8 HDMI source devices (BluRay, Apple TV) switched to 8 output destinations (TVs, Projectors).
Check Stock