Best Pe Carbon Pipe Machine

PVC Cutter, Cuts up to 2-1/2\ Pipe Capacity Ratcheting Cutter, One-Hand Tubing Cutte (PVC Cutter)

  • Cuts pipe volumes up to 2-1/2" (OD) with pipe thicknesses between 3-10mm.
  • Adopt ratchet drive technology and arch angle design, which greatly saves your strength.
  • For cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc.).
  • 2.8mm thick 4.0 manganese steel sharp blade designed for precise cutting.
  • 1/2" increments on the bottom of the handle for quick pipe measurement.
Check Stock

Reed Tool DEB1-2CTS Deburring Tool for Plastic 1-1/4 to 2-Inch CTS Pipe

  • Three sizes of pipe accommodated per DEB1 tool.
Check Stock

1 Pieces Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Pieces Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings

  • The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use.
  • Appropriate size: The punch size is 3 mm (0.118 inch), which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Both ends of the irrigation plug are of different sizes. One end is suitable for standard holes of 3 mm-6 mm, or one end of any 1/4 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole.
  • this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
  • Practical and durable: the punching tools are made of quality plastic and metal, practical and durable, not easy to rust and damage.
  • the plastic part of the punch allows you to hold it comfortably, and the punch has been polished, so it will not change It is blunt and can serve you for a long time.
  • the drip irrigation pipe plug is made of quality plastic, which is not easy to break or deform, sturdy and durable, waterproof, and can be applied outdoors in sunlight or rainy weather..
  • Scope of application: Irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles.
  • suitable for PE pipes with diameters o....
Check Stock

PVC Pipe Cutter, Cuts up to 2-1/2\

  • 【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
  • 【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
  • 【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
  • 【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
  • 【Easy to operate】：The pipe cutter i....
Check Stock

Reed Tool DEB1CTS Deburring Tool for Plastic 1/2 to 1-Inch CTS pipe

  • Three sizes of pipe accommodated per DEB1 tool.
Check Stock

VEVOR Manual Tea Cup Sealer Machine, 300-500 Cup/h Manual Boba Tea Sealer Machine, Orange, 90/95mm Cup Diameter Cup Sealing Machine with Heating Technology for Bubble Milk Tea

  • Carbon Steel Structure: Heavy-duty and durable carbon steel structure provides commercial quality reliability by protecting the product from corrosion and rust. Rubberized feet offer more rigidness and stability..
  • Max.500 Cup/h Sealing: Featuring safe and convenient operation, this cup sealing machine seals the cup within seconds, bringing the sealing output of 300 - 500 cups per hour..
  • Agile Operation: The tea cup sealer machine is designed with a flexible handle lever, allowing you to seal the cup perfectly with simple manual control..
  • For PEPPPET Cups: This cup sealer is suitable for 90/95 mm (3.54/3.74 inch)PP, PE, and PET cups. The inner diameter of the cup is required to be less than 88 mm (3.46 inch). Cup tray can be adjusted to cups with different heights..
  • Farranging Scenarios: The cup sealing machine is designed to seal cup drinks, milk tea, soybean, ice and hot coffee, smoothies, etc., ideal for drink restaurants, beverages factories, and milk tea shops..
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Ultima 3 Piece Embroidery Hoop Set for Brother Brother Simplicity & Innovis Embroidery Sewing Machines

  • Durable plastic hoops for machine embroidery. *Verify these will fit your machine before purchase*.
  • This set includes the following 3 hoop sizes: 1” x 2.5” (Brother SA431), 4” x 4” (Brother SA432) and 6.75” x 4” (Brother SA434).
  • Fits BROTHER HE1, HE-120, LB6770, LB6800PRW, LB6800THRD, PE-270D, PE-300S, PE-400D, PE500, PE525, PE540D, PE925, SE270D, SE-400, SE425, SE350 models.
  • Fits BROTHER SIMPLICITY SB7050E & SB7500 models.
  • Fits INNOVIS 500D, 540D, 900D, 950D & 990D models.
Check Stock

Watts 175C Ball-Type Copper Adapters for Solder or Hose Washing Machine Shutoff Valve, Bronze, 1/2 Inch

  • This washing machine shutoff valve requires no special tools and connects copper, PEX, CPVC, and PE-RT pipe in any combination.
  • Bronze body construction with 1/2 inch sweat copper ell adapters for copper tubing, 3/4 inch hose outlet connection, and O-rings for a water tight seal.
  • Rated to 200 PSI and 200 Degrees F for use in potable water and hydronic heating applications.
  • Single lever on-off and suitable for residential or commercial applications.
  • This water shutoff valve controls both hot and cold water simultaneously.
Check Stock

Longing Home 2 Pack Rain Gutter Downspout Extensions, Flexible Drain Down Spout Hose Extension Gutter Connector Rainwater Drainage Gutter Extender from 21 to 60 Inches - Black

  • ...sion is retractable and can easily be extended from 21 inches to 60 inches to direct rainwater to where you want it to go. Also it is easy to bend and hold various shapes to suit various situations at different home entrances..
  • 【Easy Installation】 Simply screw the pipe inlet to the extension tube, then screw it in after you have connected it to the gutter and you are done. A detachable adapter allows you to quickly and easily attach it to an existing downpipe..
  • 【Package】 2 x Downspout drainage extensions.
  • 2 x raw material straps. The raw material tape can be wrapped around the threads of the pipe connection and then screwed into the pipe inlet. This effectively prevents rainwater from leaking through the connection. Giving you a better experience of using the product..
Check Stock