Best Pe Water Supply Pipe

CTKcom Micro Spray Adjustable 360 Degree Water Flow Irrigation Drippers on Stake Emitter Drip System,Pack of 25

  • ✔ Dripping and Water spray Dual function ,switched off individually,Adjustable water output.
  • ✔Suitable for 4mm/7mm(Inner/Outer diameter) tube.
  • ✔with 1/4'' barb thread connection,can easily connect PE pipe and drippers.
  • ✔Practical, portable and easy to install.
Check Stock

Smart ato System, Aquarium Auto Top Off System, Fish Tank Sump Water Filler Refiller, Automatic ATO System for Aquarium with Pump,Water replenishment system, DIGITEN Smart ato System for fish tank

  • 【Simple, Complete, Smart Automatic Top Off System】 aquarium automatic water supply system, super easy installation and maintenance. Suitable for aquariums up to 5/8"(16mm) thick, durable PC material holder to prevent move, adjustable bracket on holder make different water levels possible..
  • 【Relay Control】 precise dual float water level sensor for overfilling protection. When the water goes below the minimum water level , the power will be activated, the pump automatically works, and cut off once the water level reach to maximum. The second float ball will work when the first float ball fails.It can effectively avoid the influence of wrong information and is more reliable than other sensors..
  • 【Siphon Break】 The siphon break is optional installation part. It is recommended that the water level of display tank be higher than the reservoir, and DON’T leave the end of the water supply pipe in the water, otherwise, it will siphon after the pump shuts off, if so the siphon break must be installed at the end of the water supply pipe..
  • 【Plug-and-Play with all parts included】 Everything you need is included, it....
Check Stock

SDTC Tech 12-Pack U-Shaped PVC Water Pipe Clamps Fit for 25mm OD, Compatible with 3/4" ID PVC Pipe

  • 1" Inner Diameter U-Shaped PVC Pipe Support Clips suit for water supply systems for civil and industrial constructions, not easy to deformation and durable..
  • Fit Pipe OD: approx 25mm / DN20, compatible with 3/4" ID SCH 40 PVC Pipe..
  • Made of high quality PVC, with tight structure, Toughness and high strength, can fix and protect the pipelines well..
  • Comes with screws and hollw wall anchors, easy and convenient for installation, and keep your pipe close to the wall..
  • Package includes 12pcs PVC Pipe Clamps + 12pcs hollow wall anchors + 12pcs mounting screws..
Check Stock

WELWIK 4PCS Chrome Plated Stainless Steel Tapered Flange Cover Deep Bath Flange Made to Match Bell Flange, 1/2 in

  • The keyhole flange cover is made of stainless steel, which is heat-resistant and resistant to a variety of chemicals..
  • When the pipe passes through the wall, it will leave an ugly surface.
  • Conical pipe cover can be decorated with pipe cover or cover the gap to keep the appearance clean..
  • The size of flange cover is about 17 x 32 x 56 mm / 0.66 x 1.25x 2.2 inches, which is suitable for 1 / 2 inch CTS nominal copper pipe (5 / 8 inch outer diameter).
  • The hole cover flange cover is compatible with all 1 / 2'' nominal water pipes, such as copper, PEX and CPVC..
  • Can be used in various residential and commercial applications, and can be installed with kitchen faucet, sink, toilet, dishwasher, refrigerator and other water supply devices..
Check Stock

JOBYNA Electronic Water Descaler System, Alternative Chemical and Salt Free Water Softener Systems Whole House, Prevents Scale Build-up in Pipe, 3 Installation Methods, Works with All Pipes

  • 【HOW IT WORKS】JOBYNA water descaler is designed to treat water for the whole house. By conducting complex frequency-modulated electromagnetic signals into the water, when the water flows through the line area, the decomposed water molecules better combine with calcium and magnesium ions to form crystal particles with a smooth surface, which are not easy to adhere to the surface of pipes and equipment, while allowing the existing limescale decomposes slowly..
  • 【NEW GENERATION DESCALING SYSTEM】New electronic water descalers are equipped with LED light, which display its operating status more clearly. The wider and longer flat copper wire increases the area with the pipe and attaches to the pipes better, makes it easier to wind and works more efficiently..
  • 【THREE WAYS TO INSTALL】No need to damage the pipeline, just wind the coil outside the pipeline. You can install the host vertically, horizontally, or at any other angle by cable ties, adhesive hooks or screws(all the mounting hardware comes included). Reminding: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
Check Stock

Mornajina Outdoor Misting Cooling System with Pump Kit, 49.2FT(15M) Misting Line with Filter, 20 Brass Mist Nozzles, 1 Brass Adapter (3/4\), 12V DC 60W 5L/Min, Self Priming Sprayer Water Pump

  • 【Outdoor Mist System with Water Pump】: 1 Instruction, 12V DC 60W 5L/Min self priming sprayer water pump+ power supply, 18.5M/60.69FT misting line with filter (including 3.5M/11.5FT spray hose+15M/49.2FT spray line), 20 brass misting nozzles, 20 T-tube connectors, 50pcs Cable Ties, 50pcs saddle clamps,3/4inch(25mm) Standard water tap adapter, 1 PTFE Tape..
  • 【Parameters of Water Pump】: Pump size: 16.5x10 x6cm(6.69x3.82x2.36inch). Equipped with 12V 5A 60W AC / DC power adapter.
  • flow rate: 5L / min. Atmospheric pressure 30PSI (2-3kg).
  • maximum working pressure: 30bar (450psi)..
  • 【Energy Conservation】: PE food grade materials, brass nozzle, American standard size, orifice nozzle diameter: 0.4mm (0.016"), thread size: UNC10-24, working pressure: 0.8MPa, flow rate: 5L / min. spray seat is sliding lock type fast push, can connect 3/4 inch (25mm) pipe. Normal working pressure is 30PSI (2-3kg). Limit pressure: 30bar (450psi), only use for outdoor cold water. No power consumption, less than the traditional watering water quantity..
  • 【With Pump Use & Without Pump Use】: These misting cooling system can be connected to water hose and use directly without pump. But if the water pressure is not enough and no water spraying out, ple....
Check Stock

Bydorunce Electronic Water Descaler System Electronic Water Descaler Remove Limescale Impurities Healthy Drinking Water

  • [Why to install]—The organisms present in the tap water supply pipes include: plankton,biofilms attached to the surface of the pipes and sediments at the bottom of the pipes. If things go on like this, it will not only damage the blocked pipes, but also endanger health..
  • [Suitable for various pipes]—Electronic water descaler system needs to be installed on the water inlet pipe for maximum effect.For the iron content in the water above 0.3 ppm, recommended to use an iron removal filter before..
  • [Drink more healthy water]—Electronic water descaler can decompose water molecules through electromagnetic signals, remove impurities, and it is not easy to attach and precipitate..
  • [5 minutes installation]—The installation is simple, just wrap the coil on the water pipe of the water inlet, turn on the power and the installation is complete..
Check Stock

MISSIGO Tee Adapters for Outdoor Cooling System Patio Misting System 3 Pcs

  • Package Includes- 1*35ft preassembled misting Line, 10 T-type tees and 1 straight-through, 10 brass misting nozzles, 1* 3/4" faucet connector,1 misting hose cutter, 10 hanging snap clips, 30 hanging clamps, 30 cable ties,1 teflon tape,1 user manual.
  • Excellent Tube Material- Using PE pipe, the pipe thickness is 0.4mm, thicker than others. 35 FT misting hose, 10 T-Joints with a cutter, you can freely customize the length and angle you want. Flexible and sunlight-resistant black PU tubing for long-life use..
  • High-Quality Nozzles: Made from brass material, anti-rust and mist effectively. The holding part is made from recyclable plastic material, which is good sealing, no leak, sleek and sturdy..
  • Effective Misting Cooling Systems- The misting system produces water mist, which absorbs the heat from the outdoor surrounding in hot summer, and provides cooling outdoor areas, cools the surrounding air temperatures up to 20℃ - 68℉.
  • Wide range of uses- Misting cooling system widely apply for garden, vegetable land, landscaping, greenhouse, humidification, trampoline water park, umbrella, shade sail, swimming pool/animal cage.Bring you a cool summer.
Check Stock

lifeegrn Misting System Calcium Inhibitor Filter, RV Water Filter with Hose Protector, Garden and Camper Water Mister Filter, White(2 Pcs)

  • Unique design - Each order comes with 2pcs winterize blowout adapter and 4pcs pressure washers. We designed this winterize adapter for preventing freezing of garden water pipes, sprinkler systems, faucets and travelling vehicles water lines such as RV/camper/boat/travel trailer which with water supply system, by blowing out water from water lines/plumbing or pipes. Very easy and convenient anti-freezing method to use and help to reduce the use of antifreeze..
  • Universal threaded connection - Our winterize blowout adapter is standard threaded connection in most cases. Designed with a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread. Easy attach air line to water lines or hose system to make a nice winterization solution..
  • High quality product - The winterize blowout adapter is made of brass, strong ruggedness and good durability, very safe to use and not easy to break or deform, can serve you longer time.
  • Easy to use - Screw the water pipe to the female thread side and connect the quick plug to the quick coupling inside the air compressor line, then turn on the air compressor and turn around the ball stem to open or close and adjust the air flow rate to blow dry water from the water pipe..
Check Stock

Compatible with Compression Sleeve Puller(03943)-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • ...d compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours..
Check Stock