Best Pellet Stove Vertical Vent Cap

US Stove Company US GW1949 Wiseway Non-Electric Pellet Stove, 60 lbs Hopper, Black

  • 3" Outside Air Kit for Pellet Stoves with 3" Air Intake Pipe.
  • It Has The Duralock System For A Tight Seal. Allows Fresh Air Into An Existing Pellet Stove Installation That Currently Uses Inside Air To Burn.
  • 3" Diameter, With 10 Feet Of Flex Hose When Expanded.
  • Kit Includes Faceplate And Screen, Moisture Barrier, Aluminum Flex, And Two Clamps.
Check Stock

PitsMaster Replacment Pellet Grill Smoke Stack for Traeger Pit Boss Camp Chef etc.

  • ⭐【Function】WADEO pellet grill smoke stack increases the circulation of air inside the smoker to heat food more evenly, adding more smoky flavor....
  • ⭐【Upgraded Material】The chimney surface is made of black powder coated steel, which can withstand high temperature of up to 300℃. With the....
  • ⭐【Adjustable Cap】The height of the smoke stack cap can be adjusted via the threaded hole to adjust the air circulation. Please ensure the cap....
  • ⭐【Compatibility】Suitable for Traeger, Pit Boss, Camp Chef and other pellet grills smokers. You can also perforate holes and install it if your....
  • ⭐【Package】1*Chimney Gasket, 1*Black Chimney Cap, 1*Smokestack Flue Pipe, 3*Screws, 3* Washers, 3* Nuts. Comes with everything you need and takes....
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • ...s tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,Each set of products includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 yellow Spouts and rubber gaskets, 6 nozzle caps with threads,2 kinds of gas con vent caps . And the drill bit needed to install the gas con vent....
Check Stock

Breckwell 5/8 Door Rope Gasket Seal Kit C-G-050

  • Fits Pellet Stove Models: ~ P20 Cadet ~ P22 Maverick ~ P22I Maverick Insert ~ P23 Sonora ~ P23I Sonora Insert ~ P24 Blazer ~ P24I Blazer Insert ~ P26....
  • 5/8″ diameter x 9′ length fiberglass rope gasket.
  • 1 oz tube of high temperature silicone sealant included..
  • Replaces Part # C-G-050 Guaranteed Highest Quality & Highest Fire Rating Gasket Material..
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • ...thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads,2 kinds of gas can vent caps, And the drill bit required to install the gas discharge c....
Check Stock

Quadrafire Programmable Wall Thermostat w/wire PROG-STAT Wall-Stat-P

  • Fits Quadra-Fire Pellet Stove Models: ~ Castile Freestanding ~ Castile Insert ~ Classic Bay 1200 – CB1200FS ~ Classic Bay 1200 Insert – CB1200i ~ Mt Vernon E2 ~ Mt Vernon E2 Insert ~ Mt Vernon OE (Original 4 Speed Model) ~ Santa Fe Freestanding ~ Santa Fe B ~ Santa Fe Insert.
  • Fits Quadra-Fire Gas Stove Models: ~ Castile Gas ~ Colbay FS ~ Colbay Insert ~ Columbia Bay Insert ~ Garnet ~ Hudson Bay ~ Hudson Bay Insert ~ QFP44 ~ QVI-25FB ~ QVI-30FB ~ QVI30 ~ QVI-35FB ~ QVI35 ~ Sapphire ~ Topaz.
  • Fits Heatilator Eco-Choice Stove Models: ~ CAB50 ~ PS35 ~ PS50.
  • Includes 25′ of Wire, Mounting Hardware and Batteries.
  • Genuine OEM Replacement Part # 811-0520 | WALL-STAT-P | PROG-STAT.
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • ...n spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the ins....
Check Stock

12 inch Smoke Tube Cheese Smoking Tube for Pellet Grill 304 Stainless Steel BBQ Wood Pellet Tube for Charcoal Grills Amazing Billowing Smoker tubes for Cold or Hot Smoking 5 Pieces

  • [PREMIUM PELLET SMOKER TUBE] - Ricpwit 12 inch smoker tube is made of premium quality stainless steel which makes it not break, bend or rust easily.....
  • [FITS ALL GRILLS & SMOKERS] - Ricpwit pellet smoker tube fits all grills and smokers, compatible with electric, gas, charcoal, pellet grills and....
  • [DUAL CAPS & PORTABILITY] - Open-able cap at one side, easy to fill up and light up the pellets without worry about burn your hands. Sealed cap at....
  • [EASY TO USE] - Fill the tube with pellets or smoking wood chips, use a propane torch to light them for 1 min, let them burn for about 3-5 mins, then....
  • [EASY TO CLEAN] - The pellet smoker tube equipped with a silicone basting brush, a cleaning brush and 2 S hooks. All of these are packaged well in a....
Check Stock

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • ...s tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the i....
Check Stock