Best Permanent Magnet Motors

Vibco BVS-250 Silent Pneumatic Turbine Vibrator, 480 lb. Force, 7200 VPM, 9 CFM, 60 to 80 psi, Threaded Exhaust, 5\ Bolt Pattern

  • [Application]: Permanent magnet DC motor can be applied in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment.
  • [Low Noise]: It drives up the super smooth, almost no noise.
  • [High Speed]: This motor features high speed 3500rpm and large torque.
  • [Feature]: The stator windings of the motor are copper wire, CW/CCW control.
  • Need for external direct current governor, it can achieve speed adjustment function.
  • [Application]: This permanent magnet DC motor is ideal for DIY generator.
  • Can be applied in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment.
Check Stock

Dial Indicator, Flexible Strong Magnetic Stand Base Holder with Lever Dial Test Indicator Gauge Exactness Scale and Installation Accessories 0~0.8mm

  • ►Move Base Easily -- Switch on/off to move the base without Response force, avoiding damaging the gauge and working desk..
  • ►Permanent Magnet -- The base is equipped with a permanent magnet, convenient to holding lever indicator on a machine tool..
  • ►Easy & Quick Fixed -- Flexible arm can be fixed at any angle, easy and quick to use..
  • ►Maintain Use Easily-- With simple structure, easy to use and maintain, fine adjustment universal swivel clamp..
Check Stock

Marsrock 600r/m 100W 12V or 24V Permanent Magnet Generator AC Alternator for Vertical or Horizontal Wind Turbine 100W Wind Generator (24V)

  • With the best NdFeB Permanent Magnet, high-grade pure copper winding, the generator can product power stably and high efficiently..
  • Specially-designed rotor and rotator, low resistance moment in start-up, good at cooling..
  • Gearless, direct -drive, and low rev rare earth Permanent Magnet Generator, easy and safe for operating and maintenance..
  • Die casting aluminum alloy case, anti- corrosion, acid and alkali resistant, anti salt corrosion..
  • Package Size: 21cm x 21cm x 15cm (8.27in x 8.27in x 5.91in).
Check Stock

MarsRock 800r/m 600W 12V or 24V Permanent Magnet Generator AC Alternator for Vertical or Horizontal Wind Turbine 600W Wind Generator (12V)

  • 1. With the best NdFeB Permanent Magnet, high-grade pure copper winding, the generator can product power stably and high efficiently..
  • 2. Specially-designed rotor and rotator, low resistance moment in start-up, good at cooling.
  • 3. Gearless, direct -drive, and low rev rare earth Permanent Magnet Generator, easy and safe for operating and maintainance..
  • 4. Die casting alluminum alloy case, anti- corrosion, acid and alkali resistant, anti salt corrosion.
  • 5.Package Weight: 7.5kg (16.53lb.) Package Size: 21cm x 18cm x 10cm (8.27in x 7.09in x 3.94in).
Check Stock

Brute Magnetics | 3600 lb Pull Force Neodymium Fishing Magnet | 5.31 Double-Sided Magnet with Eyebolt and Threadlocker

  • Includes fishing magnet with two eyebolts and threadlocker..
  • Use as a single sided or double sided magnet, depending on where you place the eyebolt..
  • Each side provides 1800 pounds of pulling force..
  • Made with rare earth neodymium, the strongest permanent magnetic material available..
  • Includes threadlocker to secure eyebolt while magnet fishing..
Check Stock

Kraus KWD100-100MBL WasteGuard 1 HP Continuous Feed Garbage Disposal with Ultra-Quiet Motor for Kitchen Sinks with Power Cord and Flange Included, 16 1/2 inch, Black

  • KIT INCLUDES: 1 HP garbage disposal, drain and dishwasher connectors, power cord, sink drain stopper/plunger, mounting flange with stainless steel rim – DURABLE CONSTRUCTION: Stainless steel components in ABS housing help ensure reliable and powerful operation – Stainless steel resists odor and rust – Permanent-magnet HEAVY-DUTY MagnaGrind MOTOR provides instant power to the grinder – FASTER OPERATION than induction motors – QUIET OPERATION with QuietStorm soundproofing technology and anti-vibration mounting system.
  • MOTOR-SAVING SHUT-OFF system stops power in case of blockage to help prevent damage.
  • RESET BUTTON restores power after debris is removed – Activated via wall switch or air switch, CONTINUOUS FEED DISPOSAL shreds large quantities of food waste, eliminating the need to grind in batches – QUICKER AND EASIER to operate than batch-feed disposals – SINK STOPPER allows you to fill the sink for soaking – Extended tail piece works as a plunger to push down stubborn food scraps.
  • PRE-INSTALLED POWER CORD INCLUDED: Designed for plug-in installation with switch-operated wall outlet – INSTALLATION-READY with mounting flange, anti-vibration mount, 1 1/2" drain connection, rubber gaskets that help prevent disposal leaks – OPTI....
Check Stock

Master Magnetics ZG38A-ABX Flexible Magnet Strip with Adhesive Back, 1/16\ Thick, 3/8\ Wide, 100' (1 Roll)

  • Magnet holds on one side only and is rated at up to 4 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Minimum recommended length for magnet is 3".
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
  • Magnet withstands temperatures from 0-150 degrees Fahrenheit. Made in USA.
Check Stock

Motion Pro 08-0475 Air Gauge Holder

  • Aluminum gauge holder designed for use with Motion Pro Professional and digital tire gauges.
  • Magnet on back allows for quick mounting to any metal surface or can be used without magnet for permanent mounting.
  • Eye catching number plate graphics with space for personalized race numbers.
Check Stock

Master Magnetics ZG30A-ABX Flexible Magnet Strip with Adhesive Back , 1/16\ Thick, 3/4\ Wide, 100 feet (1 Roll)

  • Magnet holds on one side only and is rated at up to 9 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.
  • Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Minimum recommended length for magnet is 1-1/3".
  • Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.
  • Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics. For best results see full product description.
  • Magnet withstands temperatures from 0-150 degrees Fahrenheit. Made in USA.
Check Stock

Pikasola Wind Turbine Generator 400W 24V with 3 Blade 2.5m/s Low Wind Speed Starting Wind Turbines with Charge Controller Windmill for Home

  • low vibration on operation, high efficiency..
  • ★ Wind Blade: 23.4inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power....
  • ★ Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A....
  • ★Rotating Body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the....
  • ★Real Parameter, Not False: Our product parameters are Real & Actual, not False. Base on designed after repeated experimental testing. Wind turbine....
Check Stock