Best Pex Elbow

VEVOR PEX Heat Transfer Plates, 200 pcs Box Radiant Heat Transfer Plates, 4 ft Aluminum PEX Heat Transfer Plates, 1/2 inch Heat Transfer Plates designed for PEX Tubing

  • Excellent product to provide a superior heat transfer function for home and commercial radiant floor system..
  • High Compatibility: Our radiant heat transfer plates are suitable for most type of 1/2" PEX tubing(5/8" OD). Compatible with most brands' PEX, PEX-AL-PEX or EVOH coated 'Oxygen Barrier' pipes..
  • Easy Installation: Installed in radiant system of under-floor (between joist) type, sandwich type, above sub-floor(sleeper), wall & ceiling. Cuttable design to satisfy different needs. Notice: You should leave 1-2" spacing between plates when you set up..
  • Thickness & Note: This in floor heat plates feature 0.016" standard thickness, can be stapled by hand or stapler. Its U-shaped design reduces thermal voids that occur from gaps between plates & tubes..
  • Diverse Uses: Perfect to enhance heat transfer of the system and make the needed water supply temperature lower. Power-saving PEX heat transfer plates to use at home, apartment, hotel, etc. Number of Plates = Square Footage x 1.30 / length of plates. Example: 1000 Square Footage: Area Multiply by 1.30 = 1300ft of plates. (650 plates of the 2ft version OR 325 plates of the 4 ft version).
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

Pexflow PFR-R58100 Oxygen Barrier Pex tubing, 5/8-Inch x 100-Feet, Red

  • Reliable – resistant to cracks, uninterrupted hot water flow, maintenance free, long life expectancy.
  • Performance – prevents oxygen and foreign elements from penetrating heating system to help maintain corrosion resistance of metal parts.
  • Flexible – ability to bend pipe making it easy to work with the bend radius of 5 feet.
  • Markings – PEX tubing markings unique feature imprints common standards and ratings making it easy to understand tubing properties.
  • PEX Type: PEX B / Color: 1 x Red / PEX Tubing Size: 5/8 Inch / Coiled: Yes / Total Length: 1 x 100 Feet / Pressure Ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F.
Check Stock

IWISS PEX Crimping Tool Combo1/2-inch 3/4-inch Plumbing Tool Copper Crimp Ring with Go/No-Go Gauge Conforms to ASTM F1807 Standards

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to....
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

Yellow Jacket 42024 Series 41 Manifolds with 3-1/8\ Gauge, 60\ Plus II Standard Fittings, bar/psi, R-410A

  • INSTALLS IN SECONDS: PEX water manifold requires no soldering or glue.
  • LINER: No loose components with SharkBites' tube liner, nothing to lose and easy to create a dependable secure connection.
  • COPPER, PEX, CPVC: SharkBite straight coupling plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
  • EXPANDABLE and FLEXIBLE: Simple – Connect multiple manifolds together using SharkBite PEX Fittings.
  • LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
Check Stock

(30) 1/2

Check Stock

AMZCNC Copper Tube Fittings Crimping Tool Copper Pipe Crimper Press with 1/2,3/4 and 1 inch Jaw for ProPress Copper Fitting-Manufactured Plumbing, Pipe Press Copper Crimp Tool

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, etc.
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

Eastman 48316 icemaker connector

  • LENGTH: The length of this connector hose is 8-Feet long.
  • DIMENSION: This supply line connector features 1/8-inch ID (1/4-inch OD) PEX hose.
  • MATERIAL: This hose is made of high-impact PEX which provides strength as well as includes brass captured nuts.
  • DURABLE: The PEX material of this appliance connector provides durability which prevents it from kinking making it last longer.
  • EASY INSTALLATION: This refrigerator ice maker connector is quick and easy to install without hassle.
Check Stock