Bluelab MONGUACON Guardian Monitor Connect for pH, Temperature, and TDS in Water with Data Logging (Connect Stick not Included), Nutrient Meter for Hydroponic System and Indoor Plant Grow
Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
General uses includes growing tent and reservoir.
Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
High and low alarm when outside parameters, data logging with Bluelab Connect software.
Lab quality glass pH probe with easy two pointcalibration.
Conductivity / temperature probe comes factory calibrated so it's ready to be used.
Double junction probe is more accurate than test strips and drops.
Combine with Bluelab pen and meter for full garden nutrients monitoring in soil.
Other features: International power supply, water resistant design.
KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit and connect stick sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
CIZTADA Smart PH Tester for Water Hydroponics Digital PH EC TDS Meter with ATC High Accuracy Multi-Functional Water Tester for Indoor Plant Grow, DWC, Wine, Pools& Spas and Aquariums
...ter and wait for a few seconds to get the data on the device display or connect phone to get the results..
【Wide Application】Water quality tester has an accuracy of 0.01 PH and a test range of PH 0-14.0, EC 0-9999 μS/cm.
10.01-19.99 mS/cm, TDS 0-9990 ppm. it works for hydroponics, indoor plant grow, DWC, drinking water, beer brewing, winemaking, laboratory, pool& spa, aquarium and etc liquid testing. Notice: It is not suitable for soft solids testing..
【Automatic Calibration】Smart PH meter adopts a three-point calibration method and equipped with standard calibration powder. It can automatically identify calibration solutions of PH 4.00, PH 6.86 and PH 9.18. simple calibration and quick setup. Notice: Always calibrate PH 6.86 first. Then calibrate PH 4.0 or 9.18 after PH 6.86..
【4 in 1 Multi-Functional】4 in 1 multi-functional tester professional measurement PH, TDS, EC and TEMP. Get all data on the app at the same time, and simplifies the complicated measurement steps. It uses the latest technology to avoid the reading all over the place. The readings are more stable..
pH Meter, 3-in-1 TDS Temp pH Tester 0.01 High Precision Water Quality Tester, pH Measurement Range with 0-14, Digital pH Meter for Household Drinking, Pool and Aquarium
Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
General uses includes growing tent and reservoir.
Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
Lab quality glass pH probe with easy two point calibration.
Conductivity / temperature probe comes factory calibrated so it's ready to be used.
Double junction probe is more accurate than test strips and drops.
Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
Other features: International power supply, water resistant design.
KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Bluelab MONGUACONIN Guardian Monitor Connect In-line for pH, Temperature, and Conductivity Measures, Easy Calibration and Data Logging (Connect Stick not Included)
Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
General uses includes growing tent and reservoir.
Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
High and low alarm when outside parameters.
Data logging with Bluelab Connect software.
Lab quality glass pH probe with easy two point calibration.
Conductivity / temperature probe comes factory calibrated so it's ready to be used.
Double junction probe is more accurate than test strips and drops.
Combine with Bluelab pen and meter for full garden nutrients monitoring in soil.
Other features: International power supply, water resistant design.
KIT INCLUDES: Calibration solution and inline probes, probe care kit and connect stick sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Bluelab MONGUA Guardian Monitor for pH, Temperature, and Conductivity (TDS) Measurements in Water with Easy Calibration, 3 in 1 Digital Nutrient Meter for Hydroponic System and Indoor Plant Grow White
Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
General uses includes growing tent and reservoir.
Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
Lab quality glass pH probe with easy two point calibration.
Conductivity / temperature probe comes factory calibrated so it's ready to be used.
Double junction probe is more accurate than test strips and drops.
Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
Other features: International power supply, water resistant design.
KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
KETOTEK Digital PH Meter, PH Meter with ATC, Water PH Test Meter with 0.00-16.00ph Measure Range for Drinking Water, Hydroponics, Aquariums, Swimming Pools. High Accuracy 0.01 PH Pen Tester
AMAZINGLY ACCURATE AND WIDELY USED. It has the resolution of 0.01PH, fast to get the testing result and can test the PH value for any 0-16PH liquid which you wanna test, such as drinking water, swimming pools, aquariums, hydroponics, wine and beer..
AUTOMATIC TEMPERATURE COMPENSATION ( ATC).You can get the accurate water PH testing result without taking care about the influence of water temperature..
SMALL SIZE AND POCKET PORTABLE. It has small size and low weight as a pen, it is easy to be carried, It is convenient for you to take it in your pocket when you go out..
EASY TO USE AND CALIBRATE. You can get the PH testing result of the water that just need to press the button of “ON”, and just need to press the button “OFF” to close it. You can calibrate the digital PH meter with pressing the button “CAL” and immersing the electrode into the solution..
POSITIVE AFTER-SALES SERVICE AND WARRANTY. We will respond your any questions about the product within 12 hours. And we provide a 12-Month warranty service. Pls don’t hesitate to contact us if you have any questions, we will do our best to help you..
YINMIK 2nd Generation pH TDS Tester Combo with Horizontal Display Digital pH Meter Professional PPM Meter for Hydroponics Swimming Pool Aquarium Household Drinking Homebrew
[Fully Meet the Needs of Hydroponic Growers] pH Meter: Monitoring the pH level of the hydroponic nutrient solution to ensure it can be maximum accessed by the plants. TDS & EC Meter: Keep tracking of the amount of nutrients in your solution to prevent it from being too high or too low and hindering the healthy growth of plants..
[Helpful for Aquarist] pH Meter: Keep the balance of pH value of fish tank, drastic fluctuations in pH value can seriously damage the survival environment of fish. TDS & EC Meter: Monitor the amount of ionic salts in the tank to remind fish keepers when to change the water to balance the ratio of various substances..
[Friendly for Pool Owners] pH Meter: Keep the pool water at the right pH level, which is friendly to swimmers' skin and eyes. TDS & EC Meter: Keep the TDS value of the pool water appropriate can extend the life of the pool equipment..
[2nd Generation pH TDS Meter Combo] Tired of using 1st generation yellow ones with small vertical reading display? The screen of YINMIK 2nd pH TDS meter combo is designed for horizontal display, when you check the pH TDS or EC value, you can always get temperature reading simultaneously, which makes your job easier and more comfortable.
Hanna Instruments HI 98130 Waterproof pH/Conductivity/TDS Tester with ATC, High Range
Waterproof floating tester measures pH, high-range EC/TDS, and temperature for hydroponics, agricultural, and water-quality testing applications.
pH electrode is replaceable, has a stainless steel snap-in connector that prevents bent or broken pins, and a renewable cloth junction that extends electrode life.
Graphite conductivity electrode eliminates contamination by salt deposits in solution.
Power management features include battery life displayed at startup, automatic shut-off, and battery error prevention system that alerts user when battery is low.
Accessories include pH electrode, electrode removal tool, and four 1.5V batteries.
YINMIK Digital pH Meter TDS Meter Combo Accurate Measurement for pH TDS EC Temp with ATC, 2nd Generation Water Quality Tester with Horizontal Display for Hydroponic Swimming Pool Aquarium
[Fully Meet the Needs of Hydroponic Growers] pH Meter: Monitoring the pH level of the hydroponic nutrient solution to ensure it can be maximum accessed by the plants. TDS & EC Meter: Keep tracking of the amount of nutrients in your solution to prevent it from being too high or too low and hindering the healthy growth of plants..
[Helpful for Aquarist] pH Meter: Keep the balance of pH value of fish tank, drastic fluctuations in pH value can seriously damage the survival environment of fish. TDS & EC Meter: Monitor the amount of ionic salts in the tank to remind fish keepers when to change the water to balance the ratio of various substances..
[Friendly for Pool Owners] pH Meter: Keep the pool water at the right pH level, which is friendly to swimmers' skin and eyes. TDS & EC Meter: Keep the TDS value of the pool water appropriate can extend the life of the pool equipment..
[2nd Generation pH TDS Meter Combo] Tired of using 1st generation yellow ones with small vertical reading display? The screen of YINMIK 2nd pH TDS meter combo is designed for horizontal display, when you check the pH TDS or EC value, you c....
Bluelab PROBPH pH Probe for Water, Replacement Electrode for Meter, Monitor, and Controller with Easy Calibration, Tool for Hydroponic System and Indoor Plant Grow
Measures pH in nutrient solution (acid or alkaline) for precise up and down adjustment and is used with meters.
General uses include growing tent, reservoir, water tank, and hydroponics.
2 meter / 6.56 foot standard cable, easy calibration, fully waterproof including cable joint, easy to clean and maintain.
Double junction probe has a longer lifespan compared to standard probes due to less contamination and is more accurate and reliable than comparable pens, test strips, drops, and more.
Combine with Bluelab tester, meter and other controllers for full garden nutrinets monitoring in water and soil.
KIT INCLUDES: Cable, probe holder, storage cap, BNC connector, probe care kit is sold separately.
Supplied by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
