Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space Project, Work with V2 Camera on Jetson Nano
Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between. It does NOT support 5MP V1 cameras or any other sensors..
Fresh Look: Give your Raspberry Pi Camera Module V2 a fresh look by freeing the sensor from the camera board without losing the traditional flex ribbon cable extension.
Fresh View: Having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
Fresh Option: The extension cable is compatible with Arducam IMX219 Sensor drop-in replacement modules including IMX219 autofocus and IMX219 M12 lens series. Those combinations will also work with the NVIDIA Jetson Nano.
Note: Please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. The Raspberry Pi Camera Module V2 is NOT included..
SainSmart IMX219 Camera Module for NVIDIA Jetson Nano Board & Raspberry PI CM3 8MP Sensor 160 Degree FoV,RoHS Certified
The 160-degree wide-angle lens can capture a large area of the scene within a short shooting distance and is suitable for photographing large scenes....
This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3..
The camera is capable of 3280 x 2464 pixel static images, and also supports 1080p @ 30fps, 720p @ 60 fps and 640 x 480 p 60/90 video recording..
It is widely used for AI intelligent recognition, face recognition, road identification line recognition, license plate recognition, etc..
Note: For Raspberry PI, this camera module only compatible with Raspberry PI CM3, other version is not supported. If you have any other questions....
Raspberry Pi Camera Module V2-8 Megapixel,1080p (RPI-CAM-V2 + 20"/500mm Flex Cable + Pi Zero Cable)
What Will You Get: An 8mp raspberry pi camera V2 with a 15cm original FFC cable, a 50cm FFC cable for model A and B, a 15cm FPC cable for pi zero & w and an acrylic case..
Sensor: 8 megapixel Sony IMX219, Max. resolution: 3280 (H) x 2464 (V).
Frame Rates: 1080p30, 720p60 and 640x480p90.
Recommended Power Supply: DC 5V, above 1.8A.
Typical Usage Scenarios: this tiny camera board can be used for monitoring Octoprint 3D Printer, Home security and surveillance, dashcam or other machine vision application. Please search ASIN: B09TNG4V55/B09TKYXZFG to get Raspberry Pi Camera ABS Case and Tripod Case Kit..
MakerFocus Raspberry Pi Zero W Official Case New, RPI Zero ABS Box Cover Shell Enclosure Cases Compatible for Raspberry Pi Zero V 1.3 Pi0 with 2pcs 15cm Camera FFC Flex Cable
√Suitable for Raspberry Pi Zero v 1.3 and Raspberry Pi Zero W..
√With 1pcs Short camera cable and 2pcs 15CM FFT camera cable for you easy to use the camera..
√Removable Lid provides easy access to the camera and display ports, Removable Side Panels with easy access to the GPIO port..
√We have strong customer service team, how to e-mail us? Please click”MakerFocus”and “Ask a question”, we will help you fix the question, looking forward to your consultation..
JUN-ELECTRON for Raspberry Pi 4 Camera with Acrylic Holder Case Infrared Night Vision 5M 1080p Video Webcam Compatible Suit for Raspberry Pi 3 B+/Pi 3/Pi Zero
Compatible with all series, fit for Raspberry pi 4 / 3 B+ with 200cm FFC Camera Cable, and match 50cm FPC Cable for Pi Zero, also can works with your....
New Design Acrylic Case can hold camera make it works more stable, the case reserve the hole for heat-sink, IR led and screws hole, Easy to adjust the....
Better low light performance, IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition.
HD resolution, the night vision camera is capable of 2592*1944 pixel static images, and also supports 1080P 30fps, 720P 60fps and 640*480P 60/90fps....
Typical usage scenarios, Home security and surveillance, motion detection, 3D printer observe, time-lapse photography and other Raspberry Pi camera....
2 Pieces 5 Megapixels 1080p Sensor OV5647 Mini Camera Module with 6 Inch 15 Pin Ribbon Cable Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4
Wide compatibility: our high-definition raspberry pi version 1.3 camera modules are suitable for raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4.
Focus lens: our 5 megapixels OV5647 sensor has equipped with fixed focus lens, can help you to grasp clear and beautiful pictures.
Still picture resolution: 2592 x 1944, its max video resolution is 1080p, clear enough for you to use, a practical part for you to take some exquisite photos for your family.
CSI interface: this interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth ink which carries pixel data from the camera back to the processor.
Package content: you will receive 2 pieces of 5 megapixels 1080p sensor OV5647 mini camera and 2 pieces of 6 inches 15 pin ribbon cable, each one can serve you for a long time, enough for daily using and replacing.
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display
Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
MakerFocus Raspberry Pi 4B Camera IR Camera Module 75 Degree 5MP OV5647 Webcam Automatically Switching Between Day and Night Vision with Holder and Cable for Raspberry Pi 4B 3B+ Zero and Zero W
Video tutorial available in the product guide and documentation.Night Vision Camera - Link to see what is happening even in the dark. Video Tutorial: Please get the link from the product description below.
Built-in IR-CUT Automatic Switching Filter - In day or night, the dual filter automatically switches the filter for optimal imaging. Manual settings are not required, plug in then it can be used. The advantage is that during the day, the photographs taken will not be reddish.
HD Video Infrared Camera - Enjoy sharp 1080p video. It features two high intensity Infrared LED spotlights for night time recording and surveillance.
5MP OV5647 Camera - Support 1080P resolution, 3.6mm focal length, FOV (Diagonal) is 75 degree.
Comes with Hight Quality Acrylic Holder - Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like.
Comes with Two Adapter Cables - Compatible with Raspberry Pi Model 4B / 3B+ / 3B / 2B+ / 2B / B / Raspberry Pi Zero and Raspberry Pi Zero W.
