Material: Made from High Quality Tinned Copper 34*0.178TS, UL1007 18AWG.
Advantages: the cables are made from multiconductor cable, Tinned Copper.it is more resistant to oxidation, and support large currents, It is more stable to power the computer hardware.
Note: the cable is GPU 8Pin Not CPU 8Pin, please noted that before place order..
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous....
In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive....
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no....
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the....
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated....
LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller
12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector
The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
PWM Fan Splitter Extension Cable - 1 to 5 Computer Fan Splitter Cable Compatible with 3 & 4 Pin PC Cooling Fans, 13 inch Black Braided Nylon Cable
Manages Multiple Fans - Our PWM fan cable expands one motherboard PWM fan header to support up to five internal cooling fans at the same time to reduce the load on the motherboard.
Easy Installation - Simply plug the PWM case fan splitter into the motherboard and attach the other end to the chassis with the double-sided adhesive.
Flexible Use - The PWM 5 way PC fan splitter can be used as a 4 pin fan splitter for most motherboard cooling fans. Our pc fan extension cable offers greater flexibility between motherboard and CPU cooling fans.
Designed for Performance - The connector types of the PWM fan extension cable includes 1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.
Money-back Guarantee - Backed by our manufacturer’s warranty, if your fan splitter extension cable falls short of your expectations for any reason, contact us for a full refund.
Biostar TB360-BTC D+ (Intel 8th and 9th Gen) LGA1151 SODIMM DDR4 8 GPU Support GPU Mining Motherboard
LGA 1151 Supports 8th and 9th Generation Intel Core Processor.
Supports SO-DIMM DDR4-2133/2400/2666 up to 16GB Memory.
Supports 8 x PCIe x16 slots (50mm between X16 slots).
Motherboard Dimensions 19.1 Inch x 9.25 Inch ( W x L ).
This motherboard has NO 24 pin ATX power supply connector it uses eight 6 pin PCIe connectors for power and has 8 PCIe connectors as outputs to power GPU's. If using a ATX power supply you will need a 24 pin jumper to start the power supply..
Your CPU MUST have intergrated graphics. HDMI cable must be plugged into on board HDMI. This can be changed later in the BIOS if desired..
SOONTECH Complete Mining Rig, Crypto Mining Rig Frame for Ethereum, 8 Gpu System Mining Rig, Including Motherboard, CPU, SSD, RAM, PSU(without GPU)
Please note: This product includes HP Power 750W (model: HP DPS-750RB A), with a power cord (110V and 220V can be used) when running without noise, very quiet. Does not include GPU and fan. win10 system (not activated, please do not buy if you mind).
Eth mining rig, including: motherboard, Intel CPU (with CPU cooler), 128GB SSD, 4G RAM,PSU,Breakout Board ,6 PIN cable to (6 + 8) Pin * 17pcs, ,win10 system. installation instructions。.
Two HP Power 750W (MODEL: HP DPS-750RB A) can be used at the same time, please contact customer service for purchase..
GPU Port Gap: the port gap between GPUs is 55mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 50mm, otherwise you will just put only less than 4pcs GPUs on the motherboard at the same time..
Note: If you have any questions, please contact us. We will solve your problem in time..
12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface -Black
This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color)..
This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load..
The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out..
The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop..
The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for th....
MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM
...dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame also can be used for RTX 3080/3090, but we recommend that you install 4-6 graphics cards, because after exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports a single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
