Best Pin Lug Shank Coupling

Dixon TCF72 Nylon Tuff-Lite Fitting Short Shank Coupling 3/4 GHT Female x 1/4 Hose ID Barbed

  • Short shank female coupling for connecting a hose to a male coupling of the same diameter in a straight run.
  • Hose barb on one end and female GHT threads on the other.
  • Nylon for strength, flexibility, and resistance to abrasion, crushing, and cracking.
  • Barbed fitting for a tight seal on hoses.
Check Stock

CURT 45821 Clevis Pin Hitch Ball Mount, Fits 2-Inch Receiver, 6,000 lbs, 1-Inch Hole

  • HIGHLY VERSATILE. This clevis pin trailer hitch ball mount equips your vehicle with two towing options: a strong clevis pin for straight-line towing applications, or the clevis pin can be removed and a trailer ball bolted on for towing a trailer.
  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and rated to tow up to 6,000 pounds gross trailer weight and 600 pounds tongue weight (limited to lowest-rated towing component).
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this clevis pin hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

Wheel Accessories Parts 14x1.25 Chrome - Cone Seat - Premium Lug Bolt Wheel Lock Set (24mm Long) (Set of 4 + Key) (14x1.25, Chrome)

  • 4 Lug Bolt Locks with M14x1.25 Thread, Shank length (thread length): 24mm, 1 dual hex key included (13/16" & 3/4").
  • Lug Bolts can be commonly found in applications of many European cars where the vehicles have been designed to use Lug Bolts instead of more commonly used Studs and Lug Nuts..
  • Chrome plated lug bolts have a long lasting, high luster finish. Every lug bolt is double nickel plated to surpass 48 hour salt spray testing..
  • Our lug bolts are forged, not cut from bar stock. Forging allows for better mechanical properties and consistent quality. Our threads are rolled (forged) onto the bolt, not cut like most of our competitors..
  • Our Lug Bolts are made of Carbon Steel and Heat Treated to 10.9 grade. Carbon Steel is an alloy known for its very good form-ability, comparatively high strength, and a very good surface finish.
Check Stock

Maverik TACTIK 2.0 Lacrosse Head UNSTRUNG - White

  • Easily Mounts To Your Atv Or Utv Hitch Receiver To Provide A Hitch Ball, Winch Strap Loop And ⅝" Pin Hole For Yard Work Equipment, Utility Trailers....
  • Multi-Hitch Includes A 2-Inch Ball, 2" Shank, ⅝" Pin Hole, 5/8" Hitch Pin And A Bridge Pin.
  • The Hitch Ball Has A 2-Inch Rise To Give Sufficient Ground Clearance In Most Applications.
  • Constructed Of Durable, Powder-Coated Steel.
Check Stock

OSTARE Snap Shackle Stainless Steel Quick Release Rigging Sailing Fixed Bail Snap Shackle 2pcs (2\ Sliver)

  • Stainless steel bow shackle is made of high quality stainless steel for durable use, anti corrosion and rust resist, strong load-bearing..
  • Threaded pin for easy removal and securing, help protect the eye of a nylon lifting sling or polyester round slings from wear and tear.
  • Great for coupling, lifting or conventional towing..
  • Perfect connection accessories, used for coupling chain and wire rope.
  • Apply to a variety of marine, industrial, agricultural or household applications..
  • Package includes 4 pieces M6 bow anchor shackle, can be used for parachute cord woven bracelet accessories or outdoor climbing, rescue tools, etc..
Check Stock

American Standard 7381125-400.0070A Fluid Master 400A Universal Toilet Water Fill Valve, 10.00 Inch Wide x 3.00 Inch Tall x 3 Inch Deep, Black

  • American Standard universal fill valve that will hold up in high-use areas, making it perfect for most applications.
  • Universal Fluid master 400A replacement fill valve includes valve, shank washer, lock, coupling nuts, coupling washer, refill tube and refill tube clip.
  • Check your model toilet for compatibility.
Check Stock

CURT 56038 Vehicle-Side Custom 4-Pin Trailer Wiring Harness Fits Select Acura MDX Black

  • HIGHLY VERSATILE. This trailer hitch ball mount features 3 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect....
  • DEPENDABLE STRENGTH. The 1-7/8-inch ball is rated for 5,000 lbs. GTW / 500 lbs. TW, the 2-inch for 7,500 lbs. GTW / 750 lbs. TW, and the 2-5/16-inch....
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to....
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch shank is protected with a durable black powder coat finish, and the trailer balls have a....
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your....
Check Stock

McGard 64012 12 mm x 1.5 Bulge Conical Seat Lug Nut - Chrome44; Pack of 4

  • Includes 16 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch.
  • Wheel locks and Cone Seat lug nuts install Kit includes Lug Nuts, Wheel Locks , 1 unique Key and 1 Key Pouch. For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom..
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
Check Stock

Sandvik Coromant 0.75\ Max Dia, CoroMill 300 face milling cutter, 1\ Weldon (DIN6535-HB) -inch: 1, CoroMill 300 -size 1032 (R300-1032) insert, lead, RA300-019M25-10L (Pack of 1)

  • Coromant capto coupling, threaded coupling, arbor, cylindrical shank, MSSC or weldon mounting.
  • Insert geometries and grades for all materials.
  • Precision-ground inserts for high accuracy.
  • Extra closed pitch version for high feed semi-finishing.
Check Stock

SZJELEN WEIPU ST1210/ST1213 Threaded Coupling IP67 2Pin~9Pin Waterproof Connector Plug and Socket,Industrial Electrical Female Male Connector (4Pin)

  • Model : WEIPU ST1210/ST1213 Series 4Pin Connector.
  • Material : Zinc alloy with black nickel plating:Termination:Solder.
  • Aviation Connector + Socket, IP67 Waterproof,Threaded Coupling,Solder Termination.Widely used in various machine tools, locomotives, electricity, post and telecommunications, communications, navigation, instrumentation, lighting systems, medical and oil exploration and other fields..
  • If you need a different type of connector, please contact us..
Check Stock