Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)
Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)
1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler..
Designed for most ATX case with at least 7 PCIE slots in the market.
The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Only supports PCIE 3.0.
With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space.
MZHOU PCI-E 1X to 16X Riser Card with M.2 to PCI-E X1 NGFF Slot NVME Adapter Card,for Bitcoin Crypto Mining Ethereum Mining（Black）
PCI-E 1X to 16X riser card---VER009S-PLUS version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment..
The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices.Plug and play..
M.2 NGFF to PCI-E X16 adapter card, support the M.2 NGFF slot of PCI-E channel,using this adapter card can convert the M. 2 NGFF interface into a common PCI-E X16 interface..
M.2 NGFF adapter card have 4 fixed holes on the board, 30mm,12mm, 19mm，21mm.Can be broken off positioning according to the length of the card slot in your machine..
Support System：Compatible with all WINDOWS systems, LINUX, MAC. Package contents:PCI-E 16X Main Card*1/PCI-E 1X Plug-in Card*1/24in USB 3.0 Cable*1/6PIN to 15PIN Power Cable*1/M.2 to PCI-E riser card*1/Screw*1/Screwdriver*1.
IMPORTANT NOTICE: Compatible with ARESGAME AGK750/AGK850/AGT850/AGT1000/GL1000 PSUs ONLY..
This pci-e modular cables are non-interchangeable for AGS750 and AGS850 PSU..
ATX 8 pin male end to connect to the power supply (NOTE: 8 pin male connector is ATX 8 pin, not pci-e 8 pin.).
Two PCIE 8 pin(6+2) male ends to plug into the video graphics card. (These two 8pin are detachable, they could be used as a 8 pin or 6 pin by sliding on/off the 2 pin).
Note: This replacement PCI-E cable is only designed for the brand and model as listed in the 1st Point. If you use other incompatible brand PSUs or models, it will burn or damage the PSUs or graphics cards. In this case, we won’t take any responsibility for unproperly usage or installation..
Monoprice SATA Cable - 0.67 Feet - Black | SATA 15pin to 6pin PCI Express Card Power Cable
If your PC's power supply has no PCI-express power connectors, you can use this handy cable to provide PCIe power from one of your open SATA connections.
SATA 15 pin to 6 pin PCI Express Card Power Cable.
Product Dimensions : 4.2 x 3.8 x 1.2 inches.
Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers..
S-Union [8PCS] New 16AWG 6Pin PCI-E to 8 6+2 pin Cable 27.5 Inch 70CM Length PCI 6Pin Male to Male Cable for GPU/PSU Breakout Board GPU Ethereum ETH Mining Power Supply with 5 Nylon Cable Ties
【Item】PCI-E 6Pin to 8 (6+2) pin Male to Male Cable.
【Safety】This item is 16 AWG wire，Able to withstand greater current and high power appliances.
【Feature】The line is 27.5 inch (70CM) long, easy to use and connect.
【Compatibility】This item is Compatible with Graphics Video Card, GPU breakout board,GPU Mining Power Supply, for GPU breakout board Search:....
【What You Get And Shipping】8 x PCIe 6Pin to 6+2 Pin Male to Male Cable & 5x Nylon Cable Ties. SHIPPED FROM THE U.S. Delivery time takes about 2-5....
waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors
The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
ACTIMED PCIE Riser 1X to 16X GPU Riser (6PIN/MOLEX/SATA Powered) 10 Capacitors, PCI Express Risers Adapter Card for BTC/ETH/GPU Mining Rigs, with 60cm USB 3.0 Cable and LGB-7 Color Lights, 6 Pack
...o that it will not fall out of the slot..
【YI-CHANG Service and Packing List】GPU Riser purchased from our store enjoys a 30-day money back guarantee and lifetime technical support. Package includes 6X PCI Express Riser adapter board,6X 23.6 inch/60 cm USB 3.0 extension cable,6X PCI Express X1 Gold Plate contract,1X user manual..
