Best Pipe Insulation For Hot Water Pipes

HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check Stock

HEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check Stock

Quoyiyo Outdoor Backflow Preventer Insulation Cover for Winter Pipe Freeze Protection (24\W x 24\H,Black)

  • The Easiest way to protect your pipes from freezing-This Sprinkler Freeze Protector Protects your backflow pipe systems from freezing, bursting, and blowouts due to the severe weather conditions like snow, rain, wind, and sun exposure heating. Avoid expensive costs for valve replacement and repair every year.
  • Insulation & Waterproof- Our pipe insulated cover made of durable industrial grade 600D PVC coated waterproof insulation Oxford material and fiber filler, with good waterproof and insulating properties, not easily brittle or peeling off, keep your pipes away from freezing cold..
  • Easy to Install & Stay Sturdy- Velcro at the bottom let you can easily placed it on the backflow pipe or remove easily, and the grommet increase security, lock the pouch and keep it secure, keep the backflow cover on the ground and preventing from being stolen, more safe..
  • Buy It Without Worry- Please MEASURE your backflow system before purchasing to make sure that this cover is suitable for your backflow valves system. And if you are not satisfied with this product or any other problem, please contact us immediately, we will give you a refund or free replace new one for you..
Check Stock

VIVOSUN Insulated Spiral Pipe Wrap Insulation Bubble Film 6-Inch by 25-Feet

  • Instructions: Wrap it around pipes or ductwork, overlapping about every 1/2-inch as you use.
  • 10mm-Diameter Double Bubbles: 10mm-diameter single bubble.
  • Double bubble insulation's benefits are to provide airspace between the pipe and wrap that will aid the insulation value.
  • Multiple Insulation Features: Double bubbles form the more airspace, the better it is at slowing heat transfer.
  • 99.9% pure aluminum bonded to tear-resistant polymeric core.
  • Which makes an excellent thermal barrier for water, noise.
  • 97% Highly-Reflective Foil: Both sides are lined with aluminum foil, 97% high reflectivity enables reflecting optimal lighting to the plants for better growth.
  • Versatile Use: Our most popular bubble foil insulation is used for applications in metal buildings, pole barns, basements, and many other places that require a vapor barrier.
Check Stock

LJSF clamp 2 Pieces of 304 Stainless Steel Hoop Extension Welding nut Round Hose clamp Suspension Pipe clamp Industrial Household Fasteners Simple to use and Durable (Size : 15 19MM)

  • 5-22mm spring clamp fuel pipe hose water pipe air pipe clamp fastener.
  • Suitable for air hoses, water pipes, fuel pipes, silicone vacuum hoses.
  • These spring clips are made of 65 Mn spring steel.
Check Stock

Bydorunce Electronic Water Descaler System Electronic Water Descaler Remove Limescale Impurities Healthy Drinking Water

  • [Why to install]—The organisms present in the tap water supply pipes include: plankton,biofilms attached to the surface of the pipes and sediments at the bottom of the pipes. If things go on like this, it will not only damage the blocked pipes, but also endanger health..
  • [Suitable for various pipes]—Electronic water descaler system needs to be installed on the water inlet pipe for maximum effect.For the iron content in the water above 0.3 ppm, recommended to use an iron removal filter before..
  • [Drink more healthy water]—Electronic water descaler can decompose water molecules through electromagnetic signals, remove impurities, and it is not easy to attach and precipitate..
  • [5 minutes installation]—The installation is simple, just wrap the coil on the water pipe of the water inlet, turn on the power and the installation is complete..
Check Stock

Casart Bio Pressure Filter UVC 120V/60HZ Koi 1500-2500 Gal for Garden, Pool Fishpond Pump Filter Pond Filter

  • 【Quality Material & Excellent Performance】Made of high quality ABS material, which features great insulation function.
  • its maximum flow-through is up to 10000 L/H, suitable for decorative ponds of 2500 gallons and fish ponds of 1500 gallons..
  • 【4 Filter Sponges & Cleaning Indicator】Equipped with 4 filter sponges, which can be removed, washed or replaced, the filter ensures the balance of water flow . Yellow and blue sponge density is different to increase filtration efficiency. An indicator will float up to remind you that the filter needs to be cleaned..
  • 【Function Switch & Water Pipe Adapter】The switch on the top can be easily rotated to sewage and drainage through 2 exists, you can adjust it according to your different needs. The water pipe adaptors can match with different diameters of water pipes. There are different sizes of drain holes, which can be adapted to different water pipe widths..
  • 【Easy Solution for a Clear & Healthy Pond】This pressure filter is an effective sealed pressure filter system which uses biotechnology to keep your pond clean and healthy. The convenient handle allow for easy relocation, you can place it on the land or in the water..
Check Stock

HEATIT JHSF 12-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather..
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue.
Check Stock

HEATIT JHSF 6-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather..
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue.
Check Stock

HEATIT JHSF 80-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather..
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue.
Check Stock