Ymjoinmx Industrial Commercial Humidifiers Whole House Humidifier 2000sq.ft Large Room Humidifier 1800ml/h 23.8L/6.2Gallons Top Fill Water Tank 110V
[Top filled&Faucet adding water] Two ways to add water to the humidifier: 1. Open the top cover and pour water directly into the water tank.
2 use a water pipe to connect the faucet and the humidifier water tank, the machine automatically adds water, and it stops when it is full. (With filter)Length of water pipe connecting pipe: 1ft..
[Product parameters] 23.8L/6.2Gallons water tank capacity, the maximum spray volume is 2000ml/h, and it can be used continuously for 12 hours when filled with water. Adjustable from 45-95%RH, remote control..
[Timing function] 1-12h timing function to reduce energy consumption and keep moist for a long time.
turn on sleep mode at night and the air is moist and ensure a good sleep mode..
[Intelligent constant humidity] Set the ideal humidity value in advance. When the humidity in the room is higher than the set value, the machine automatically enters the standby mode.
when the humidity in the room is lower than the set value, the machine automatically resumes work..
[Long-tube&single-head nozzles]-The long-tube spray nozzle sprays upwards to quickly humidify the upper space.
the single-head nozzle sprays can quickly increase the surrounding humidity..
...ting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
Takes all of the work out of disconnecting and moving or switching from machine to machine.
Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
No special adapters for each tool required.
EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
SPECIFICATIONS: Constructed from heavy-duty hard plastic.
1/8-inch (3mm) quick adaptor coupling thickness.
4.5-inch (11.4cm) quick adaptor coupling length.
Fits snugly on dust ports for table saw, planer, jointer, and more.
Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
Product 2: Meets FCC Class B and EN 55022 Class B requirements.
Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
48 LINT TRAPS and 48 TIES: washer lint catcher, lint trap for washing machine snare lint traps and 48 pcs of cable ties, enough for replacements. Each stainless steel washer mesh filter works as a lint catcher / remover/mesh lint trap/laundry filter mesh.
Washing machine lint trap size: Expand length of the lint trap is 27 cm and 5 cm in width, fits most washing machine discharge hoses. Cable tie: length is 19.7 cm, good help to securely fasten lint Trap to the drain pipe. Fits all household laundry hoses Fits 1" to 3" diameter hoses. The small mesh holes in the Big Kitchen Sink traps are the best size for catching lint. These washing machine lint traps will not fall apart..
Washer Hose Lint Traps Material: Lint traps are made with high-quality 304 stainless steel instead of ordinary 201 stainless steel. These lint traps will not rust, do not readily tear, and are durable, Prevent clogging of drains. Rustproof and long lasting, can effectively filter cotton fluff in the washing water to prevent clogging your laundry sink..
Easy Installation lint catcher: Washer Sink Screen Filter is very easy to install, traps can slips easily onto end of hose, no tools needed for installation, easy to put on the discharge hose and they are easy to remove. Nylon cable t....
...ur woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
Takes all of the work out of disconnecting and moving or switching from machine to machine.
Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
No special adapters for each tool required.
EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
SPECIFICATIONS: Constructed from heavy-duty hard plastic.
