Best Plain U bolt

CertBuy 8 Pack Square U-Bolts 2-1/2 Inner Width 100mm Length 304 Stainless Steel U-Bolts with Washers and Nuts Replacement Parts and Accessories for Automobiles Trailer Ski Boat or Sailboat Trailer

  • Material: The U-bolt is made of 304 stainless steel, which ensures strength on the basis of easy to use, rustproof, scratch-proof and corrosion resistan..
  • Advantage: The 304 stainless steel U-shaped bolt with a higher rust-proof level has a longer service life under the conditions of sun exposure and high coastal salt..
  • Easy to Install: hook the U-bolt around a square post, adjust plate to desired position, and secure tightly in place with a hex nut on each leg..
  • Application: Used to fix or connect the locked parts to square products or sheet products, such as railing, wood, etc. Suitable for boats, plumbing, and other home and industrial applications..
Check Stock

HiTow Trailer Hitch Tightener Anti-Rattle Stabilizer for 2' & 1.25' Hitch, Rubber-Coated No Rattle Noise, Corrosion Resistant

  • Compatible with all 1-1/4 inch and 2 inch Hitch, Rubber Coated.
  • Stops rocking, wobbling, banging, clanking and jerking caused by sloppy，take all the slop out, no rattle or fish tail, will providing a smooth and quiet towing experience.
  • Includes a heavy-duty U-bolt and thick powder coated plate that will stand up to all weather conditions and loads.
  • Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low.
  • Perfect for a variety hitch of SUV’s, vans, trucks, RV’s, sedans and trailers.
Check Stock

Leaf Spring Axle Extended U-Bolts (Square Bend) Compatible with Ford 1999-2004 F250 F350 Super Duty Excursion 4WD 4x4-12 inch Length - 3.15 inch Width - F-250 F-350 - Black

  • [FITMENT] Compatible with Ford 1999-2004 F-250 F250 Super Duty, 1999-2005 F-350 F350 Super Duty, 2000-2005 Excursion. Only Fits four-wheel drive 4WD models. May fit other vehicles. Verify length and width needed, as well as the bend shape..
  • [SPECIFICATIONS] Includes (4) Square Bend U-Bolts, (8) Nuts, (8) Washers. All parts are Hardware Grade 10.9. Ubolt Length: 12 inches. Ubolt Inside Width: 3.15 inches..
  • [PRODUCT BENEFITS] For use with 1 to 3 inch lift blocks / plates. These extended U Bolts ensure proper thread engagement when securing your lift pack and leaf springs to your vehicle. Designed to be solid so that it does not bend or warp under stress, and as long as they are properly installed should last the lifetime of your vehicle..
  • [MATERIAL & MANUFACTURING] The U-Bolts are made from Heat Treated Carbon Steel for optimal durability and fitment. All parts (including the Nuts and Washers) are hardware grade 10.9. Zinc plating / coating prevents surface corrosion and rust..
  • [INSTALLATION] These square ubolts do not come with instructions but is completely bolt-on. Please consult a professional if you need support. Should take 1-2 hours to install. Make sure nuts are tightened evenly (refer to diagram for sequence) and that they are torqued to correct m....
Check Stock

CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver , Black

  • An easy and convenient way to secure a spare tire to a trailer tongue or frame.
  • Square bend U-bolt has threaded brackets.
  • Brackets can be locked together (padlock not included).
  • U-bolt is sturdy and durable zinc-plated steel.
  • Tongue or frame must be between 2 inches square and 3 ½ inches x 4 inches rectangular.Holds 4- or 5-lug-hole rims.Extra-long 8 ½-inch shaft can hold 8-inch to 15-inch tires.
Check Stock

uxcell U-Bolts M8 D x 1\ W x 2-1/16\ L 304 Stainless Steel with Nuts Washers Frame 2Pcs

  • National 3/8 In. x 4 In. x 7 In. Zinc Square U Bolt.
  • National catalog model No. 2192BC square U bolts, zinc plated.
  • Designed for securing various products to rectangular wood and metal objects.
  • Plate and hex nuts are included. Manufactured from steel wire with zinc finish.
Check Stock

NC HAISDA Stainless Steel Corby Bolts Fasteners EDC KnifeMakers Pivot Pin Rivets DIY Knife Handle Studs Screws Pack of 10 5mm

  • 003cb003ePrice For:003c/b003e Each 003cb003eFastener Thread Direction003c/b003e: Right Hand 003cb003eMaterial003c/b003e: Low carbon steel 003cb003eMaterial Grade003c/b003e: A307B 003cb003eSystem of Measurement003c/b003e: Inch 003cb003eItem003c/b003e: Step Bolt 003cb003eFastener Thread Type003c/b003e: UNC (Coarse) 003cb003eGrade003c/b003e: A307 003cb003eHead Height003c/b003e: 0.188 in to 0.208 in 003cb003eMeets/Exceeds003c/b003e: ASME B18.5 003cb003eFastener Length003c/b003e: 3 in 003cb003eSquare Height003c/b003e: 0.188 in to 0.219 in 003cb003eHead Dia.003c/b003e: 1.219 in to 1.219 in 003cb003eDia./Thread Size003c/b003e: 3/8"-16.
  • 003cb003eFastener Finish003c/b003e: Plain 003cb003eFinish003c/b003e: Plain 003cb003eBasic Material003c/b003e: Steel 003cb003eStep Bolt Type003c/b003e: Step Bolt 003cb003eLength003c/b003e: 3" 003cb003eFastener Industry Standards003c/b003e: ASME B18.5 003cb003eSquare Width003c/b003e: 0.368 in to 0.388 in 003cb003eCountry of Origin (subject to change)003c/b003e: Multiple.
Check Stock

REXBETI Staple Gun, Manual Brad Nailer Power Adjustment Heavy Duty 3 in 1 Staple Gun with 2600-Piece Staples for Upholstery, Fixing Material, Decoration, Carpentry, Furniture

  • Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out..
  • Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type staples to meet your different needs.
  • Rubber grip and convenience handle lock for comfort and safe.
  • When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again.
  • Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type staples.Easy operation.
Check Stock

OxGord RV Hitch - 2 Receiver Adapter Fits 4-4.5 Bumper Beam - Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • DIMENSIONS: Fits 4" (inch) Square RV Bumper (Fits 4.5" Tall x 4.25" Deep), Accepts a 2" (Inch) Tube. It Can Hold a Max Weight of up to 200 lbs..
  • DURABLE: Constructed from Long Lasting Heavy Duty Black Powder Coated Steel with Zinc Hardware (U-Bolt)..
  • PURPOSE: Designed Specifically for Bicycle Racks or Cargo, NOT for Towing..
  • INCLUDES: One (1) Adapter with Two (2) U Bolts..
Check Stock

REXBETI Staple Gun Manual Brad Nailer Power Heavy Duty 3 in 1 Staple Gun with 2600-Piece Staples for Upholstery Fixing Material Decoration Carpentry Furniture Staple Gun+Case+Remover

  • Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out..
  • Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type staples to meet your different needs.
  • Rubber grip and convenience handle lock for comfort and safe.
  • When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again.
  • Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type staples.Easy operation.
Check Stock

Heavy Duty 2.5 Inch Muffer Clamps Exhaust 2 1/2 Stainless Steel U Bolt Clamp on Tip Pipes Connection

  • Package Includes: One Piece 2-1/2” stainless exhaust clamp. It is made of T201 stainless steel with heavy duty U-bolt saddle design..
  • The 2.5“ exhaust hanger on exhaust with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high....
  • The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts..
  • Please check the detail information as belows. We value your shopping experience and strive to offer high quality product with sincere service. If you....
Check Stock