HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black
Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Acrux7 Metal Deburring Tool Kit, 15pcs Rotary Deburr Blades Set with Handle Debur Knife, Great Burr Remover Hand Tool Aluminum Deburring Tool for Plastic, Wood, Copper and Steel (Blue)
★43mm-Blades /Black / HSS high speed steel /5 pack, Suit for (diameter .
★47mm-Blades /Black / HSS high speed steel /5 pack, Suit for plastic and soft metal. (such as copper, aluminum and silver).
★47mm-Blades /Silver / HSS high speed steel (Containing cobalt for strong cutting) /5 pack, Suit for Stainless Steel..
★Deburring Tool for Metal: Aluminum alloy Handle /Pen & Hex shape /1 Pack(No Blade), It is comfortable to hold and good for you to focus on your works before your workbench..
★MULTI MATERIAL APPLICATION - Our deburring tool is great for many types of edge cleanup. Works great for cleanup of brass, steel, aluminum, copper or PVC pipes, as well as metal edges of auto parts, gears, or any other freshly cut metal parts. Also great for trimming the edges of your 3D printed plastic objects or parts.
Mini Handheld Arrow Cutter, Multifunctional and Practical Functions Cut Off Saw Trimmer Durable Aluminum Alloy Archery Arrow Cutter 3-16mm Cutting Diameter
Rugged and durable aluminum alloy material: The arrow blade is made of high-quality aluminum alloy material. This arrow blade is durable and has a long service life..
Good compatibility and suitable thickness: cutting thickness of 1mm, suitable for 3-16mm arrow shaft, more convenient for home use..
Wide applicability: The wheels are made of high-speed steel, suitable for cutting hard and soft copper, aluminum, brass and plastic pipes, and are more tough..
Easy to use and operate: sample design, barrier-free use, suitable for everyone to use..
Easy to carry: weight: approx. 109 grams / 3.8 ounces, size: approx. 3.3 * 5.3cm / 1.3 * 2.1inch, lightweight and mini, easy to carry outdoors.
One 32 ounce bottle of Liquid-Plumr Pro-Strength Full Clog Destroyer Plus PipeGuard works quickly on fully blocked, slow flowing drains and garbage disposals.
Easy to use Full Clog Destroyer has a triple action formula that pours through standing water to unblock full clogs, protects pipes and keeps pipes clog free at the same time while fighting odors.
PipeGuard technology protects pipes and keeps pipes clog free with a repellent barrier that prevents grime from sticking to pipe walls.
Simply pour 16 ounces down the drain, wait 15 minutes, then rinse with hot water to unclog fully blocked drains, slow flowing drains and garbage disposals.
Pro-Strength Full Clog Destroyer Plus PipeGuard drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper and old pipes.
KARRYTON 48 Inch Aluminum Pipe Wrench, 8\/200mm Adjustable Jaw Capacity, Heavy Duty Straight Handle Plumbing Wrenches Plumbers Tool, Exceed the Standard GGG (48-INCH)
[8-INCH JAW OPENING] KARRYTON 48 Inch Aluminum pipe wrench is perfect for pipe diameters of 2" to 6" with a jaw opening capacity of up to 8-inch/200 mm. Straight handle made of Aluminum Alloy and jaw made of Chromium-Molybdenum (Cr-Mo) Steel, WILL NOT break or Warp..
[ALUMINUM I-BEAM HANDLE] KARRYTON pipe wrench’s aluminum handle 40% lighter than cast iron wrenches. Grey anti-rust and anti-oxidation spray coating on the surface. The long I-beam handle which is comfortable to hold with wear-resistant and non-slip quality. A pair of industrial-grade Nitrile palmed gloves included for safe operation..
[Cr-Mo JAW & ADJUSTABLE NUT] The entire wrench head is drop forged from Chromium Molybdenum Carbon steel. The hardness of the teeth is extremely high after quenching, making sure to always bite on the pipes. The non-slip nut runs smoothly for quick adjustment of various pipe sizes..
[V-SHAPED DESIGN JAW] V-shaped opening of jaw design makes it easier to clamp onto the objects (including pipes, bolts, hex nuts). Thirty-degree wave designed teeth provide most safety and gripping power without being slippery..
[WIDELY APPLICATIONS] KARRYTON’s heavy-duty 48" Aluminum pipe wrench is suitable for most kinds of pipes, nuts and bolts, and, is versatile for in....
One 32 ounce bottle of Liquid-Plumr Pro-Strength Full Clog Destroyer Plus PipeGuard works quickly on fully blocked, slow flowing drains and garbage disposals.
Easy to use Full Clog Destroyer has a triple action formula that pours through standing water to unblock full clogs, protects pipes and keeps pipes clog free at the same time while fighting odors.
PipeGuard technology protects pipes and keeps pipes clog free with a repellent barrier that prevents grime from sticking to pipe walls.
Simply pour 16 ounces down the drain, wait 15 minutes, then rinse with hot water to unclog fully blocked drains, slow flowing drains and garbage disposals.
Pro-Strength Full Clog Destroyer Plus PipeGuard drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper and old pipes.
Zalman CNPS10X Optima II RGB High Performance CPU Cooler Ultra Quiet 120mm RGB Fan 4 Copper Heat Pipes 180W TDP 61.52 CFM 1500RPM Direct Touch Heatpipe RGB Fan White
POWERFUL DUAL BLADE FAN: the double bladed 120mm fan is designed to move air more efficiently and quietly, quickly cooling down components without....
SPECTRUM RGB LED: Cooler has an RGB top cover and RGB 120mm fan for limitless color options.
DTH TECHNOLOGY: 4 pure copper heat pipes with DTH (Direct Touch Heatpipe) Technology provides ultra-fast heat transfer while minimizing thermal....
Dimension: 132mm(L) x 85mm(W) x 158mm(H)/ Weight: 740g / Heat Pipes: 4 / TDP: 180W / Material: Copper, Aluminum, Plastic / Voltage: 12V DC /....
Spurtar Mini Tubing Cutter Pipe Cutter Tube Cutter Tool 1/8 to 1-1/8 inch (3-28mm) for Copper Pipe Thin Stainless Steel, Brass, PVC Plastic Aluminum Pipe
Mainly used for cutting of soft and hard copper, aluminum, brass, plastic tubes, thin-walled stainless steel pipes and other thin pipes or tubes. Please note not suitable for bike seat or bike handlebar cutting, only for soft or thickness wall ≤3.8 mm tube.
Spurtar Pipe Cutter is a Must have Steel Cutting tool for every plumbers, electricians, vehicle mechanics, homeworkers for hobby or proffesional work.
The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure for clean cuts..
Metal pipe cutting tool with adjustable cutting capacity range between 3mm to 28mm (1/8 inch to 1-1/8 inch).
Anti-scratch electrostatic powder coating reduces the effects of static electricity during use, resistant to corrosion and rust..
