Best Plastic Injection Cup Mold

LET’S RESIN Flexible Silicone Mold Making Kit, 43oz Liquid Platinum Silicone Rubber w/Mold Housing, Mixing Cups, Fast Cure Mold Making Silicone for Casting Resin Molds & Silicone Molds(Translucent)

  • 【All in One Silicone Kit】: This kit comes with 43oz silicone rubber, adjustable mold housing with maximum size 5.9” x 5.9”x 2”, stirring sticks x 5 pcs, 8oz plastic measuring cups x 5 pcs.
  • If you’re new to mold making, LET’S RESIN silicone mold making kit is a perfect choice for you to try, provide everything that you need to get started..
  • 【Fast Cure & No Bubbles】:This mold-making silicone rubber cures at room temperature or can be heated to cure faster. It has 30~40min working time and cures in 3-6h at room temperature 73.4℉/25℃, varying with your mold size and thickness..The bubbles will automatically disappear within 2 hours due to its excellent low viscosity feature, no vacuum degassing is necessary..
  • 【Premium Mold Making Silicone Materials】: Our translucent liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber....
Check Stock

Cake Pop Maker Set, 12-Hole Silicone Cake Pop Mold with Lollipop Sticks, 15-Hole Acrylic Lollipop Holder, Measuring Cup, Decorating Pen, 4 Piping Tips, Flat Pockets, Twist Ties

  • Large quantity: this set of baking supplies is composed of 2 pieces acrylic 15 holes lollipop stand, 100 pieces white plastic lollipop hollow sticks, 2 pieces 12-hole silicone lollipop molds (colors of red and orange are random), 800 pieces twist ties, 100 pieces lollipop clear pockets, 250 ml silicone measuring cup and decorating pen, 4 pieces piping tips.
  • All of them keep up with increasing demands.
  • Enjoy DIY fun: cake decorating pen with 4 tips can be applied to make various patterns you like to decorate cupcakes, breads, lollipops, etc..
  • You can use a 250ml silicone measuring cup to get the required amount of water and flour for better baking.
  • Creat delicious snack: you can use 12-hole silicone mold to make lollipops, chocolates and insert plastic sticks into them, then display your finished products on the acrylic stand or wrap them with flat pocket and golden twist tie.
  • You will receive many compliments on beautiful snack decoration.
  • Reliable quality: the clear lollipop holder with smooth and shiny surface, which is reusable, hard to deform and easy to clean with water or wipe with paper towel.
  • Silicone baking mold has strong toughness and can be applied repeatedly and withstand temperature range from -40 to 440 degrees Fahrenheit (0-230 degrees C....
Check Stock

VITCIK (Fairing Kits Fit for Kawasaki EX300R Ninja 300 ZX300R 2013 2014 EX300R ZX300R 13 14 Plastic ABS Injection Mold Complete Motorcycle Body Aftermarket Bodywork Frame (Black & Yellow) A041

  • Injection Mold Fairing Kits Set Fit For: Kawasaki EX300R Ninja 300 ZX300R 2013 2014 EX300R ZX300R 13 14..
  • What You Get: [1]Fairing Kits(17 Pieces)+[2]Windscreen+[3]Heat Shields+[4]LIFETIME friendly customer service..
  • Custom-made: We can produce the fairings according to any pictures or sell individual part(tire fender, tank cover, rear seat cover) of the set. Please contact us if you need the bolt kits..
  • Shipping: Handing time is about 1-10 working days (Except holidays), We send out by China EMS, Normally it will take 3-10 working days for delivery (usually 5 working days according to the shipping record, not including handling time)..
  • High Quality: 100% Brand New aftermarket fairings, ABS Plastic Injection Molded, Hole-in-one molding, Perfect Fitment (ONLY compatible with original motorcycle without modification)..
Check Stock

RZMoto ABS Plastic Injection Black Smoke Double Bubble Windscreen Windshield With 5mm Black Wellnut Bolt Kit for 1988-2007 Kawasaki Ninja 250R EX250F

  • Injection Mold ABS Plastic, 100% Fits Perfect, Double Bubble Design.
  • Black Tinted, No Modification Required, Directly Replace Factory Windscreens.
  • Water and Heat Resistant, Glossy Surface, Pre-Drilled Holes, Include 5mm Wellnut Bolt (10pcs).
  • Safety Package, Sturdy Transport, U.S in Stock Fast Shipping.
  • This Windscreen will fit: 1988-2007 Kawasaki Ninja 250R.
Check Stock

Gel Coat Spray Gun Gelcoat Dump Gel Coat Sprayer Air Spray Gun Painting Tool Kit for DIY Home Fiberglass Spraying Coating Tool 0.3-0.6Mpa with Spray Nozzles

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other ma....
Check Stock

YYCH Wax Melt Molds - 100 Packs Clear Empty Plastic Wax Melt Clamshells for Wickless Wax Melt Candles

  • Perfect Size: Each clamshell molds is 4.3 x 3 x 1 inch, with a total of 6 cube, each cube is 1 x 0.94 inch, and the total capacity is 2.4 ounces, so....
  • Healthy & Environmentally Friendly PET Plastic: Made of PET material, environmentally friendly, healthy, non-toxic and tasteless. the injection....
  • Rugged and Durable: Taking into account the durability, we increased the thickness of the plastic to 0.5mm to make it more durable and easy to....
  • Reusable: The candle mold is well-made and has a long service life. It is not easy to be damaged after normal use. it can be reused and make it obtain....
  • DIY Wax Cube Essential: Very suitable for making all types of wax or soap. there are 100 pieces in each set, so you do n’t have to worry about not....
Check Stock

Replacement Drip Tray Pan Grease Catcher For George Foreman 14.5

  • Unlike other puzzle box toys that turn out disappointing & dull, the patented, award-winning Shashibo fidget box features 36 rare earth magnets for an....
  • Nothing compares to the quality & unique design of the Shashibo, durably constructed of premium injection-mold plastic, 36 rare earth magnets, and a....
  • Collect & Connect – With the strong internal magnet system of our fidget puzzle boxes, you can connect multiple magnetic cubes to build even larger....
  • A Transformational Gift – Our fidget magnet cubes make great sensory stimulation puzzle gifts and STEAM & STEM toy gifts for all ages. With every....
  • At Fun in Motion Toys, we create toys that stimulate the mind, body & imagination. Designed in the U.S. and Germany, our award-winning magnet cube is....
Check Stock

The Formula One Drivers aka The Quick and the Dead

  • Unlike other puzzle box toys that turn out disappointing & dull, the patented, award-winning Shashibo fidget box features 36 rare earth magnets for an....
  • Nothing compares to the quality & unique design of the Shashibo, durably constructed of premium injection-mold plastic, 36 rare earth magnets, and a....
  • Collect & Connect – With the strong internal magnet system of our fidget puzzle boxes, you can connect multiple magnetic cubes to build even larger....
  • A Transformational Gift – Our fidget magnet cubes make great sensory stimulation puzzle gifts and STEAM & STEM toy gifts for all ages. With every....
  • At Fun in Motion Toys, we create toys that stimulate the mind, body & imagination. Designed in the U.S. and Germany, our award-winning magnet cube is....
Check Stock

ZXMOTO Glossy Black Motorcycle Fairings Kit For 2006 2007 Suzuki GSXR 600 GSXR 750 Fairings Set Injection Mold ABS Plastic Bodywork Fairings

  • Fairing Kit Fits For: 06 07 Suzuki GSXR 600 GSXR 750 2006 2007.Comes with WINDSCREEN & HEAT SHIELD (attached to the lower fairings only) for FREE..
  • High Quality ABS Plastic,good elasticity and heat tolerance,not easy to be cracked..
  • Use same grade OEM bodywork fairing kit ABS raw material,heat-shield technology adopted.Injection mold,installation accuracy is higher than 99.9%..
  • Pre-Drilled Holes for Easy Installation.100% Brand New Aftermarket Fairing..
Check Stock

LET’S RESIN 8oz Silicone Mold Making Trial Kit, Fast Cure Mold Making Silicone Rubber, Easy Mixing, Flexible Platinum Cured Molding Silicone for Casting Resin Molds & Silicone Molds (Translucent)

  • 【All in One Silicone Kit】: This starter kit comes with 8oz silicone rubber, stirring wood sticks x 2 pcs, 100ml plastic measuring cups x 2 pcs.
  • If you’re new to silicone mold-making and afraid to fail, LET’S RESIN silicone mold making trial kit is a perfect choice for you to try without costing you a lot, provide everything that you need to get started..
  • 【Fast Cure & No Bubbles】:This mold making silicone rubber cures at room temperature or can be heated to cure faster. It has 30~40min working time and cures in 3-6h at room temperature 73.4℉/25℃, varying with your mold size and thickness..The bubbles will automatically disappear within 2 hours due to its excellent low viscosity feature, no vacuum degassing is necessary..
  • 【Premium Mold Making Silicone Materials】: Our liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber for....
Check Stock