Best Plastic Molding Barrels

COUKIU Flexible Wall Base Moulding Trim, Peel and Stick Rubber Baseboard Molding, 4 Inch x 16.4 Feet Vinyl Wall Base Cove Base (Grey)

  • 【Beautiful Design】The beautiful design of the wall trim makes your home no longer monotonous. The crown molding gives an elegant look..
  • 【Easy to Use】Measure and cut the length you need, peel off the adhesive backing and stick to smooth surface, high viscosity and long lasting. No sticky left after peeling..
  • 【Size】The size of flexible molding trim is 1.42 Inch(width) x 16.4 Feet(length), the thickness is 0.28 inch. The crown molding peel and stick will meet your various size needs, and you can cut to any length you need..
  • 【High Quality Material】The wall trim molding peel and stick is made of high quality PVC material which is flexible, durable and easy to clean with a wet towel..
  • 【Widely Application】The wall molding can stick to almost any smooth surface, such as tiles, plastic, marble, metal, glass, wood, smooth wall, etc..
Check Stock

TERAPUMP Self Priming Lever-Action Diesel Drum Pump | Telescopic 15 to 55 Gallon Hand Operated Drum Barrel | E85 Fuel Pump for DEF

  • [ 3X TRANSFER RATES ] Transfers up to 5.5 Gallons per Minute or~ 21 Liters per Minute with Manual Siphon-Action - Flexible 46.5-inch Corrugated Discharge Hose.
  • [ HEAVY DUTY PLASTIC ] Constructed of Heavy Duty P.E Plastic to Transfer Thinner, toluene, hydrochloric acid 35%, nitric acid 35%, sulfuric acid 35%, acetic acid 35%, non-potable water, gasoline, kerosene & diesel.
  • [ SUCTION TUBE ] Length of about 33.8-inch, Fits 55-Gallon Drum Barrels with 2-inch NPT Thread Bung Adapter Openings - Suction Tube is cut at a angle to lay flat again the bottom of Drum Barrels & grab every last bit of fuel.
  • [ AIR VENT CAP ] Control the Flow by Rotating the clockwise until tighten fully to create a vacuum for liquid transfer - Release the vacuum by loosening the cap to stop the transfer.
  • [ MANUFACTURER WARRANTY ] Tera Pump is a trusted brand for over 10-years, TRCDRUM includes a 1-Year Warranty on Manufacturer Defects.
Check Stock

2 Pieces PVC Bulkhead Fitting for Rain Barrels, Aquariums, Water Tanks (3/4 Inch)

  • Function: locking nut is reversed threaded.
  • The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: one and done installation, threaded from the front end, commercial and industrial use.
  • You will get: 2 pieces PVC bulkhead fitting in your package, sufficient to use them on your water tanks and you can share them with your family and friends, they are good tools.
Check Stock

No Sugar Dad's Root Beer Barrels | Sugar Free Wrapped Hard Candy Bulk | 2 pounds

  • 4 Lbs Individually Wrapped Dad's Root Beer Barrels.
  • individually wrapped candy , Washburn Dad's Root Beer flavor hard candy barrels. Dad's Root Beer candy Barrels are a nostalgic favorite and are the original root beer barrels! These original root beer barrels are a delicious hard candy in a classic, timeless flavor..
  • Enjoy the classic flavor of this beloved soda variety in yummy, hard candy root beer treats in the shape of mini barrels! They’re a nostalgic favorite! Bulk candy individually wrapped..
  • Made in the USA Packed with their signature sweet and creamy flavor. A must for any root beer fan. They’re a vintage candy favorite!.
  • The Dads Logo on each wrapped root beer barrels hard candy piece. Sealed bag of candy individually wrapped.
Check Stock

NERF Elite 2.0 Flipshots Flip-16 Blaster with 16 Dart Barrels That Flip to Double Your Firepower, 16-Dart Capacity, 16 Elite Darts

  • FLIP INTO BATTLE: Nerf Elite 2.0 Flipshots Flip-16 blaster features 16 barrels, 8 facing front and 8 facing back. Fire darts from the 8 front barrels, then flip the rear barrels forward to keep on firing.
  • 16-DART CAPACITY AND 16 NERF DARTS: Each of the barrels holds 1 dart, for a 16-dart capacity total. The blaster comes with 16 Official Nerf Elite foam darts to fully load all 16 barrels.
  • PULL HANDLE TO FLIP BARRELS: Fire 8 darts in a row from the barrels that are facing front, then pull the handle to flip the rear barrels forward and surprise the competition with another 8-dart blast.
  • FIRE 1 OR 2 DARTS AT A TIME: Pull the trigger halfway to fire 1 dart, or unleash 2 darts at a time by pulling the trigger all the way back. Bolt-action priming. Stock folds into a targeting sight.
  • SUSTAINABLE PACKAGING: Ships in simple, recyclable packaging that’s easy to open and frustration free.
Check Stock

Weiyang 1pc Fit for Jeep Renegade Sunproof Clip Slideway Ceiling Bracket Bucklet Cable Original Genuine 77368445 77368446 (Color : Right Plastic)

  • The black trim set will include (2) pieces of black trim molding to install directly over top of your factory molding..
  • This product is also NOT designed to replace your OEM roof molding, this trim is designed to sit right on top of your existing factory molding and enhance the current look..
  • Detailed install instructions will be included and should only take 5-10 minutes to install..
  • Minor trimming of the chrome moldings will be needed, any pair of scissors will do the job..
  • The trim is made of flexible and durable high quality ABS plastic with a 3M adhesive tape on the back. All of our trims are sourced from and proudly made in the USA.
Check Stock

iplusmile Knurled Nut, M3 Threaded Inserts M3 Thread Copper Knurled Nuts Heat Set Insert for Printing 3D Printer and More Projects (100pcs, 3x4.6x5.7mm)

  • M3 THREAD INSERT SIZE - 3mm x 4.6mm x 5.7mm (inside diameter x outside diameter x height). We use professional processing equipment and uniform mold production to ensure that the size error is controlled within the range of 0.01mm..
  • COPPER MATERIAL - These knurled threaded insert embedment nuts are made of durable copper. Female thread knurled nuts are suitable for mounting into tapered holes by heating or for molding during injection molding..
  • COMPLETE THREAD - M3 threaded insert nuts are all made according to standards, with clear and deep threads, small tolerances, standard round shapes, so threaded insert are easy to install..
  • GOOD WORKMANSHIP - Surface of the M3 brass insert nut is clean and free of burrs and will not harm other parts such as 3D printer, plastic or wood..
  • WIDELY APPLICATION - M3 heat set inserts are widely applied in laptop plastic housings, 3D printers, automotive,electrical injection molding, and all kinds of plastic casings. ✭✭✭(If you have any questions about our products, please feel free to contact us. We will try our best to solve all your problems until you are satisfied.)✭✭✭.
Check Stock

55 Gallon Blue Water Barrel | Solid Mold |2 Inch Bung Holes Good for Long Term Drinking Water Use | BPA Free

  • IN STOCK --- New Blue Closed Top Food Grade Water Barrels.
  • Pressure Checked Leak Tested excellent condition. High-Density Polyethylene Plastic Can be used for all types of liquids.
  • Great for a fresh water barrel use as a Rain Barrel. UN-DOT Certified All New Water Barrels are available in 15 gal, 30 gal, and 55 gal sizes..
  • NOTE: Shipped Alone - No Box, or Covering (May have a few scratches or dirt due to shipping.
  • this does not compromise the use of the....
Check Stock

312 Motoring fits 1990-1997 Honda Prelude Carbon Fiber ROOF Trim MOLDINGS 2PC 1991 1992 1993 1994 1995 1996 90 91 92 93 94 95 96 97 VTEC SI

  • The plasti-chrome trim set will include (2) pieces of chrome trim molding to install directly over top of your factory molding..
  • This product is also NOT designed to replace your OEM roof molding, this trim is designed to sit right on top of your existing factory molding and enhance the current look..
  • Detailed install instructions will be included and should only take 5-10 minutes to install..
  • Minor trimming of the chrome moldings will be needed, any pair of scissors will do the job..
  • The trim is made of flexible and durable high quality ABS plastic with a 3M adhesive tape on the back. All of our trims are sourced from and proudly made in the USA.
Check Stock

Luna Bean Baby Keepsake Hand Casting Kit - Plaster Hand Mold Casting Kit for Infant Hand & Foot Mold - Baby Casting Kit for First Birthday, Christmas & Newborn Gifts - (Pearl Finish)

  • NEWBORN KIT: Includes 2 bags of molding powder for baby feet mold or hand mold, (makes 2 keepsakes of 7.8 x 5.4 x 5.28 inches), (Step 1) 2 bags of casting stone (Step 2), 1 plastic molding container, mixing spoon, paint brush, clear finish (seals, protects, and shows off fine details), sandpaper, detailing pin, and complete instructions..
  • BABY KEEPSAKE: Our deluxe infant casting kit is the perfect molding keepsake to remember your little one's most precious moments. Our casting kit allows you to capture every detail before you blink and they're all grown-up. The unique rubbery mold captures every fine line and fingerprint, even if baby wiggles..
  • 100% SAFE PLASTER HAND MOLD CASTING KIT: Both a hand casting kit and a foot casting kit, Every Luna Bean Casting Kit is made w/ non-toxic and hypo-allergenic alginate molding material, 100% safe, fun, and easy no-bake drying for children and adults of all ages. The alginate molding material is Luna Bean's highest quality custom "Create-A-Mold" molding gel formula. It has more working time, forms a stronger mold, provides better detail, and has bolder color changing properties than other brands..
  • INFANT CASTING KIT: Great for babies up to about 9 months old (infant shoe size 3), this keepsake can be hung as a hol....
Check Stock