Best Plastic Solenoid Valve

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

isinlive 8 Pack Humidifier Tank Cleaner for Water Treatment & 4 Pack Ultrasonic Demineralization Humidifier Replacement Cartridges Filters, Compatible with Most Humidifier and Fish Tanks…

  • Application model: the B2015-S85/ B2017-S85 solenoid valve is comparable to model 4040, compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360.
  • Function introduction: the humidifier solenoid valve controls how much moisture enters the humidifier, enabling it to maintain proper humidity levels throughout your home.
  • Humidifier valve features: applicable voltage is 24 volts, the power is 2.3 watts, frequency is 14 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers.
  • Easy to install: the installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes, please note that our products do not include the installation tool.
  • Durable material: the humidifier valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time.
  • Note: please check the relevant size information carefully before purchasing.
Check Stock

(Home Humidifiers) Solenoid Valve for Honeywell 32001639-002, HE220, HE225, HE260, HE265 New

Check Stock

JDMSPEED New Red Solenoid Relay 12V Heavy Duty Replacement For Ford Starter Car Truck - SW3 - SNL135

  • Brand New and High Quality Aftermarket Replacement Part.
  • Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance.
  • 12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post.
  • Ensures Solenoid Relay SW3. B6AZ-11450-A. Replacement For AEROSTAR, Replacement For BRONCO, Replacement For BOBCAT, Replacement For BREEZEWAY,....
  • Maximizes performance. Made from high-quality materials. Easy installation.
Check Stock

Think Crucial Universal Humidifier Solenoid Valve, Compare to Aprilaire Part No. 4040, GeneralAire Part No. 990-53, Honeywell Part No. 32001639-002 & Skuttle Part No. A01-0814-148

  • EXTREMELY DURABLE so when you install your solenoid for your humidifier valve it doesn’t break, that way you don’t need to replace it for a long time!.
  • BETTER WORKING HUMIDIFIER when you fix your solenoid valve! This little guy helps water vapor get into the heated area of your humidifier so that your humidifier can work correctly. Replacing this valve can keep you from needing to buy a new humidifier!.
  • EASY TO INSTALL quickly! Plus, if you don’t know how to install it, your local appliance repair shop could do it for you, no problem! This valve is comparable to Aprilaire part # 4040, GeneralAire part # 990-53, Honeywell part # 32001639-002, & Skuttle part # A01-0814-148.
  • INCREDIBLY SIMPLE TO USE because humidifiers shouldn’t be complicated to use! Having a working solenoid valve can help your humidifier feel like new!.
  • GUARANTEED SATISFACTION because of a 30 day full money bank guarantee and a trusted Think Crucial warranty. We are so confident in our products that we have no problem giving you every penny back if you’re unhappy with your purchase. You won’t see promises like that from big box brands!.
Check Stock

labwork Solenoid Spool Valve with Gasket Replacement Assembly VTEC Engine Solenoid Aluminum Valve 15810RKBJ01 Fit for 05-07 Honda Accord Hybrid 05-07 Honda Odyssey EX EXL EXL-T 06-08

  • Aluminum VTEC Solenoid Spool Valve Assembly with gasket.
  • Variable valve timing solenoid valves feature a rugged spool filter design for greater leak resistance, increased durability and compatibility with a wide range of fuels.
  • VTEC camshaft solenoid valve is made of high-quality aluminum surface treatment, high temperature resistance, corrosion resistance, long-term use, improve wear resistance.
  • Please check the part number and pictures to verify this is the part you need.
  • Replacement for 05-07 Honda Accord Hybrid 05-07 Honda Odyssey EX EXL EXL-T 06-08 Honda Pilot 2WD MODELS ONLY.
Check Stock

Clscea 1.3 L CO2 Cylinder Generator Kit with Solenoid Valve for Aquarium Plants (Mini)

  • 【mini Body】Designed for small tank. Does not take up too much space! Quick plug design, makes the filling of ingredients SO convenient!.
  • 【High Quality Accessories】Acrylic co2 diffuser(the disk can be replaced and the refining effect is much better than glass one).
  • Check valve(prevent thetank water backflow).
  • 【SUS 304 Filter Element】Minimize the failure of solenoid valve.
  • 【SUS 304 Stainlees Steel Material 】The Cylinder, Filter Element and the Neddle valve., etc are all using real SUS 304, Durable and long lasting.
  • 【Low Temperature Silent Solenoid Valve】12V DC, working temperature is lower than body temperature, no sound and no noise!.
Check Stock

Transgo SK 4L60E Shift Kit - 4L60E 1993-ON

  • Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
  • Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
  • Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.
Check Stock

Spool Valve Assembly VTEC Solenoid with Timing Oil Pressure Switch and Gasket | for Honda Accord CRV CR-V Civic Si Element Acura RSX | Replace# 15810-RAA-A03 15810-PNE-G01 15810-PPA-A01 15810-RAA-A01

  • OEM FIT: This VTEC actuator has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective solenoid valve. Give you full control to accelerate the car beyond 3000 RPM with no hesitation.
  • PREMIUM QUALITY: The vtec camshaft solenoid utilizes aluminum valve bodies that are surface-treated to create micro finished surfaces for increased wear resistance, means you will get a fairly reliable solenoid assembly to perform excellently under all engine operating conditions.
  • FITS: 2003-2007 Honda Accord 2 Door Coupe, 03-07 Accord 4 Door Sedan, 2002 2003 2004 2005 Honda Civic Si Models, 2002-2009 Honda CR-V, 2003-2011 Honda Element, 02 03 04 05 06 Acura RSX Base L Models. Comes with oil pressure switch, gasket and heat shield installed.
  • REPLACE OEM PART NUMBER: 15810-RAA-A03, 15810-PNE-G01, 15810-PPA-A01, 15810-RAA-A01, 15810-RAA-A02, 15815-RAA-A02, 37250-PNE-G01. Robust spool valve filter screen design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels.
  • 24-MONTH WARRANTY: Oil flow rate, pressure and leakage are tested on every unit for years of effective performance. If the spool valve solenoid fails, stops working or any other problems, y....
Check Stock

Pair Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit For Chevrolet Captiva Cobalt Equinox HHR Impala Malibu GMC Terrain Pontiac G5 Saturn Vue Buick Regal 2.0 2.2 2.4L

  • A camshaft actuator solenoid, normally installed in the front of each cylinder head, is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go. These solenoids are used to control both exhaust and intake camshafts, creating the possibility of lower emissions and essentially decommissioning exhaust gas recirculation valves, as well as better performance and fuel economy..
  • There are lots of ways that your car will indicate there is an issue with the camshaft position actuator. The problem is that the same indicators are used to denote all sorts of other problems with the camshaft, its various parts, and the engine. The engine light may come on inside the car, the car may sputter or have trouble starting, or the car may ride roughly once it gets going. You’ll want to get this problem fixed as soon as you notice it..
  • This Solenoid Valve Fits for the Following Vehicles: Chevy Captiva Sport 2012-2015,Cobalt 2006-2010,Equinox 2010-2015,HHR 2006-2011,Malibu 2008-2014.
  • Saturn Aura 2007-2009,Ion 2006-2007,Sky 2007-2010,Vue 2007-2010.
  • Buick Verano 2012-2015,Regal 2011-2015,LaCrosse 2010-2015.
  • Pontiac G5 2007-2010,G6 2006-2010,Sols....
Check Stock