ORZ Plate Holders Organizer White Cabinet Dish Drying Rack for Counter top and Cupboard Small & Large
Package Includes 2 pcs: 10" Dish Plate Holder, 7" Dish Plate Holder 10" Dish Plate Holder Size: 16.5 x 11.6 x 20.4cm / 6-1/2" x 4-19/32" x 8" (L x W x....
Made of heavy iron steel, white coating with food safe grade. The rail cover with rubber guard liners, makes plates in vertical storage without....
Nice for home, restaurant, rv, camper to store dinner plates, dishes and bowls. No only for drying rack on your counter, but also for pans, pot lids,....
Plate dish holder racks make life simple. And we will offer the best after-sales service with your purchase..
✅ Frees up your Kitchen space: Gets your plates off your countertop or out of your cabinet, and into the air where you can access them easily, or let them dry after hand-washing..
✅ With snap-in design, the rack is very easy to take off and clean. Also comes with a water tray that you can easily pull-out to clean after draining..
✅ Size: 17” x 6” x 2¾”. The Kitidy plate rack can lift up to 10 plates. The length of the rack can fit up to two plates in 5 rows, holding total diameters of 18.5” side by side..
✅ Material: Made with sturdy, durable, stainless steel, coated with fine black paint. The material is rust-and-corrosion-resistant. All crucial components have undergone precise measurement and extensive testing in the factory, to ensure that the rack is extremely durable and can hold heavy dishes for a long time. Using the screw and anchor strongest installation method, the plate rack loads up to 30 lbs of dishes when installed properly: full refund or replacement if your rack falls or rusts..
✅ Easy-to-Install by 2 Methods: the package comes with screws, ....
Doeplex Olympic Weight Plate Holder Power Rack Attachment for 2x2 inch Power Rack - Fit 2\ Olympic Weight Plates
【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
【High Duty】This olympic weight plate holder power rack is made of sturdy steel, the rigid steel ensures that your weight plates are stored safely.Please note that this product can not be touched with water for a long time. Always wipe it with dry towel to keep it dry to prevent rust and affect its use..
【Extra Long】 Dimension：13.3” * 5.1” * 2”. This olympic weight plate holder power rack attachment fits most power cages with 2” x 2” tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use....
UCTRONICS SSD Mounting Plate for Raspberry Pi 1U Rackmount, Compatible with All 2.5-inch SSD, with SATA Cable, USB Cable and USB Keystone Jack
You will be getting: 1 pcs SSD mounting plate, 1 pcs SATA to USB 3.0 cable, 1 pcs USB 3.0 male to male cable, 1 pcs female to female USB 3.0 keystone jack, and 1 pack of accessories..
Designed for 1U rackmount: This SSD mounting plate is specifically designed for UCTRONICS 1U rackmount ASIN B08F9X528J, compatible with any 2.5-inch SSD (Not included)..
High Speed: Come with a SATA cable and a USB 3.0 cable allows you to get significantly faster data transfers by connecting with your Raspberry Pi 4 B, 3 B/B+, and other B/B+ boards..
Expand the Storage for Your Raspberry Pi: Add a 2.5-inch SSD to your rackmount, which can make you easily add storage, perform backups, create disk images, implement data recoveries, and transfer data to your RPi..
Easy installation: 2 slots on the bottom for mounting the rack, 4 slots for fixing the SSD, each hole of the mounting plate can be perfectly aligned with the rackmount and cover the slots where no raspberry pis mounted on the rack, make your rack more manageable. Note: The thickness of the SSD cannot exceed 9mm..
Ollieroo Weight Plates Holder Attachment, Weight Plate Storage, Power Rack Attachment, Power Rack Accessories – Designed to fit 2\ x 2\ tube power racks with 1\ hole, Sold in Pair
Note: Please confirm the holes diameter of your power rack tube, the holes diameter of plates and the width of your power rack tube.
Be Used With: Designed to fit 2" x 2" square tube power racks with 1" hole & 2" diameter Olympic Weight Plates, and the sleeve length is up to 11".
STRONG AND STURDY CONSTRUCTION: Made of solid stainless steel, heavy duty design up to 300lbs. per plate holder.
SAVE YOUR SPACE: This pair of weight plate holders is the perfect alternative for bulky & space-consuming weight plate trees. The holders are especially ideal for home gym, garage gym, or commercial fitness facilities with limited space. In addition, by using holders, the walking path becomes clear & neat without weight plates, preventing you and others tripping on weight plates on the floor.
EASY TO USE: Easy to insert and lock-in design, just slide pin into power rack's hole and swing down to lock in place. This smart design makes it more convenient for loading and unloading the weight plates.
ZOVOTA Olympic Weight Plate Holder Attachment Fits 2\ x 2\ Weight Strength Training Plates Tube Power Cage Set of 2 Storage Rack
【High Duty】This olympic weight plate holder power rack is made of sturdy steel, the rigid steel ensures that your weight plates are stored safely.Please note that this product can not be touched with water for a long time. Always wipe it with dry towel to keep it dry to prevent rust and affect its use..
【Save Space】When your room space is limited, it may be difficult to organize the weight plate. The olympic weight plate holder will help you keep your home gym clean and save space while protecting your weights and equipment..
【Easy to use】This weightlifting board bracket is easy to insert and lock. Just slide the pin into the hole in the barbell frame and swing it down to lock it in place. Pretty sturdy on your power cage. Strong bearing capacity, very suitable for home / gym squat racks..
【Extra Long】 Dimension：13.3” * 5.1“ * 2 “.This olympic weight plate holder power rack attachment fits most power cages with 2" x 2" tube (with 1" holes). The length of 13 inches can hold multiple barbell weight plates..
【Warm Notice】Please confirm your size before buy！！ Designed to fit 2" x 2” square tube power racks with 1” hole & 2 “diameter. The welding part of the side will be slightly uneven, but it will not affect the use. Pl....
YOG Olympic Weight Plate Rack Dumbbell Rack Weight Plate Tree Rack 2 inch Indoor Home Storage Stand for Bumper Plates Free Weight Stand Max 400lbs…
❥✿ (^_^) ✿【Sturdy Structure】❖:This weight Plate rack has a sturdy structure, resistant to sweat and moisture. The rust effect is good, ensuring the reliability and durability of the equipment. The enhanced powder coating is durable and will not easily change color. Scratch resistant and reduce wear..
❥✿ (^_^) ✿【Innovative Pyramid Design】❖:This weight plate rack adopts a triangular design and a pyramid structure, which can provide higher stability, solid storage space, and easier operation..
❥✿ (^_^) ✿【Provide More Storage】❖:The design of this weight plate rack can provide more storage space.
smaller weights can be stored on the internal top shelf, larger weights can be stored on the side of 2 columns, and medium weights can be stored on 3 Column side..
❥✿ (^_^) ✿【High Load Capacity】❖:Standard 2-inch boards can be installed on each of the eight pillars of the shelf. The maximum load is 400 pounds. The sloping lower height facilitates lifting, and the rubber base protects your floor..
❥✿ (^_^) ✿【Excellent Service】❖:We are committed to providing every customer with the best service, if you have any questions about the product can contact us at any time, we will give you a satisfactory solution as s....
Stainless Steel Egg Steamer Rack for Instant Pot, Pressure Cooker, Boiling Pot. Stackable Steamer Trays 2 Pack Combo for Eggs and Food. Food Stainless Steamer Rack for Pot
Holds 7 eggs firmly on each rack, steaming up to 14 eggs each batch with 2 stacking racks..
A must have instant pot accessory for Instant Pot enthusiast. Fits Perfectly in Instant pot and other pressure cookers or pots with inner pot diameter larger than 7”..
Made with premium quality 304 food grade stainless steel, safe and dishwasherable..
Serve as plate raiser just as well for other steaming recipes. Recommend to use with our plate gripper for easier retrieval of your plates..
You will receive a package of 2 egg rack in one order. The upper rack is 5.9″ wide, 2.55″ tall. Lower rack is 6.88″ wide, 2.75″ tall. Each rack can be use separately, or stack in the same pot for higher efficiency..
Suction Plates for Toddler,Silicone Plates for Baby Kids Infant Feeding Supplies Fits Most Highchair,BPA Free Dishwasher Microwave Safe-Green Fish
Safe for toddler:Suction plate for baby is made with 100% food grade silicone that is BPA, BPS, PVC, latex and phthalate free.Silicone has a natural resistance to bacteria, making it safe and hygienic. safe for baby, no plastic odor. with NO added fillers or harmful chemicals!.
Suction Plate:Cute Silicone Fish Plates Stick easily and firmly on flat surface.When you put plate on the surface with both hands, it can be easily stick on the it.No knocked over of food. No mess or chaos anymore. Say bye to traditional bowls or plates. And the plate suction is suitable for any flat surface. Such as table and counter surfaces, most highchair trays, including 'space saver' models..
Visual development - Attractive colorful divided plate with unique design meet the color development of children. The combination of plate and colorful food can promote the baby's visual development..
Self Feeding – Promotes self-feeding and develops fine motor skills, maximize your baby feeding experience. perfect for little ones learning to self-feed. The suction plate is perfectly sized for toddler portions..
Easy to wash/clean - Dishwasher and microwave safe. Silicone can withstand low and high temperatures, easily transitioning from the refrigerator or freezer to the oven or micr....
2PCS Plate Holders Organizer Metal Dish Storage Dying Display Rack for Cabinet Counter and Cupboard - Black， Small
Metal plate rack is not only organizer plates, platters, dishes, but also storage bowls, pot lids, cutting board. Perfect for home, restaurant, rv,....
Square plate holder can be free standing, just set it on the countertop for storage.
SIZE: 4.75" L x 4.5" W x 5.5" H, fits for 8" to 10" plates..
Made of heavy carbon iron steel, food safe white coated, no installation. Update plate holder organizer for cabinet, comes with a durable rubber guard....
We believe you will enjoy your new decorative plate dish holder racks. There are many other home storage series in our store, we are welcome you to....
