Parts Unlimited 12V Heavy Duty Battery - HYB16A-AB HCB16A-AB
Factory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion.
Patented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durability.
Heavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storage.
Large over the partition straps and welds increase durability, power output, and life.
LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts
【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
JDMSPEED New Starter Solenoid Relay SW-3 Replacement For Ford Jeep Lincoln Mercury 1958-1991
Brand New and High Quality Aftermarket Replacement Part.
Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance.
12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post.
Ensures Solenoid Relay SW3. B6AZ-11450-A. Replacement For AEROSTAR,Replacement For BRONCO, Replacement For BOBCAT, Replacement For BREEZEWAY, Replacement For CALIENTE, Replacement For CAPRI, Replacement For COMET, Replacement For COMMUTER, Replacement For COUGAR,Replacement For CYCLONE, Replacement For MARAUDER, Replacement For MARQUIS, Replacement For MONTCLAIR.
Maximizes performance. Made from high-quality materials. Easy installation.
Spurtar Battery Terminal Connectors 0/4/8/10 Gauge AWG Heavy Duty Top Post AMP Battery Terminal Auto Car Audio Battery Terminal Cable Ends Replacement Positive & Negative with 2 Clear Covers and Shims
Secure & Stable: Spurtar battery terminals are perfect for car battery terminals to make a tight and secure connection without any hassle with complex installation. It's the perfect tool to help protect the battery terminal ends in daily use..
2/4/8/10 AWG Gauge Inputs: Battery terminal connectors have 4 different sizes of a wiring outlet for easy wiring modification. Includes Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector.
Quality Material: Battery connectors are made of zinc alloy and copper material for strong electrical conductivity to help reduce current transmission loss. Also, it can protect the battery post against corrosion to prolong the lifespan.
Universal Fit: Spurtar Car battery terminal clamps is the best solution to organize and connect multiple cables together. Suitable for most models of car Audio battery and it works great to replace the worn out and corroded terminals.
NOTE: The hole of the Positive Terminal is 19mm while the Negative Terminal is 17mm. The Positive is Bigger than The Negative, please check before purchasing.
MWBFPAFC 109 PCS Terminal Removal Tool Kit Terminal Ejector Kit Auto Electrical Wiring Crimp Connector Pin Repair Remover Key Tools Set for Most Car Connector Terminal
Wide Application -The electrical pin removal tool kit includes 109Pcs different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances).
Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage.
Convenient - This set of electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry.
High Quality - The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle make it more safe to operate the terminal pins connectors.
Warm Tips: Please be really careful when you are using the terminal ejector kit in avoidance of pricks or other injuries,Youd better keep it somewhere kids cant reach.
Screen Protector for Pax A920 (Screen Protector by BoxWave) - ClearTouch Crystal (2-Pack), HD Film Skin - Shields from Scratches for Pax A920
The Swivel and Tilt PAX A920 / A920 Pro stand is a metal POS system holder custom designed for the PAX A920 payment terminal to make your in-store card purchases more stable and secure.
This stand can tilt up to 60 degrees and swivel a full 190 degrees, making swiveling your POS terminal from customer to merchant easier to enhance customer experience.
Mount for terminal allows for more seamless customer interactions with less risk of theft or damage to your equipment.
Flange cover conveniently hides wires and mount keeps your terminal secure for minimized chances of damage and theft.
Comes with screws and an adhesive pad for two methods of securing your holder.
also compatible with any round Discount Credit Card Supply Freestanding Plate.
【 Easy to Use 】Effortlessly removing terminal wires from the wire harness connector and adding a new wire. No need to pry open the terminals, just push and pull the terminal pins. Maintain the factory original harness and plug in your own electronic device without any damage..
【 Package Include 】12 pcs different types of car plug terminal extraction repair tools. Red handle for GM : Spring Loaded Tube*1, Square Blade*1, Flat Blade*2, Fork Blade*1, Screwdriver*1. Green handle for wire terminal: Tube*4, Flat Twin Blade*2..
【 Considerate Design 】Color coded provides the user a visual clue to works faster. The knurled surface provides a secure, non-slip grip during use. It is light weight, compact shape, and coming with blow-molded case, easy to storage and carry..
【 Wide Application 】This terminal release tool set works on almost all vehicles that has electrical terminal and cables, enables for an effortless disconnection even on hard to reach places..
【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts
【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
【Wide Application】These battery terminal connectors can be used for ....
NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail
【UK-2.5N DIN Rail Terminal Blocks Kit】Comes with 20pcs UK-2.5N 12 AWG terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers and 1pcs 8" aluminum rail .
【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
【8in Aluminum DIN Rail】Length : 203mm/ 8".
Height : 7.5mm/ 0.3". Thickness : 1.2mm/ 0.047". Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickl....
4 Pieces Battery Terminal Connectors 4 Way Battery Terminal with Hex Wrench Quick Release Disconnect Car Battery Terminal Copper Car Battery Terminal Positive Negative for SAE (Gold)
Package content: package includes 4 pieces battery terminal connectors, namely 2 pieces positives and 2 pieces negatives, and 2 pieces hex wrenches are also included, sufficient to meet your daily requirements of usage and replacement, bringing convenience to you.
Quality material: the quick release disconnect car battery terminal is made of pure copper with tin-plated, sturdy and firm enough for long term usage, and it would not deform or corrupt easily.
It has good electrical conductivity, thus it can decrease voltage distortion and transmission loss.
The hex wrench is made of stainless steel, which is stable for you to use.
Positive and negative labels: these copper car battery terminals have labels for you to recognize which one is the positive and which one is the negative.
Positive has a red label, and negative has a black label, helping you connect the correct terminal for the correct polarity.
Detailed sizes: in these battery terminal accessories, the inner diameter of the positive battery terminal connector is 17.5-19 mm/ 0.69-0.75 inch, the inner diameter of negative battery terminal connector is 15.9-17.5 mm/ 0.63-0.69 inch, the max wire clamp is 9.5 mm/ 0.37 inch, the mini wire clamp is 6.5 mm/0.25 inch, the minimum wire size is 16 mm/ 0.63 ....
