Best Plumbing Fitting Bathroom

EXTRAUP DC 12Volt 330 GPH Portable Low Suction Electric Water Transfer Removal Utility Pump With Suction Hose Kit

  • ...out of hot tubs, or filling stock tanks. USA’s ProGear 5500 Pumps deliver high performance each and every time..
  • MOVE WATER AT THE FASTEST RATE WITH HIGHER PRESSURE: The ProGear 5510 High Performance Water Pump was designed with a unique 5 chamber diaphragm and internal by-pass for longevity and performance in any plumbing system..
  • HEAVY DUTY: Our heavy duty, Professional Grade 115 Volt AC self-priming pump provides up to a 14-foot lift, quiet operation and is CSA Certified. We stand behind our products and the ProGear 5510 High Performance water pump is backed by a *10-year no hassle warranty..
  • Made in the USA: This water pump is proudly made in the USA using high quality, tough, durable, and long-lasting parts. SATISFACTION GUARANTEED. We stand behind our products with personal service.
  • NOTE: Plumbing or fitting modifications may be required. May require additional parts or wiring to install. Plumbing or electrical skills recommended.
Check Stock

SparkPod 6\ Rain Shower Head with 6\ Shower Arm - High Pressure Rain - Luxury Modern Look - No Hassle Tool-less 1-Min Installation (Luxury Polished Chrome)

  • HIGH PRESSURE RAINFALL SHOWER HEAD: Our luxury bathroom rainhead is the perfect replacement that will jet out high-pressure rain of hot water so your whole body is doused with the downpour. You won’t go back to a normal shower again.
  • 6-INCH SHOWER ARM: This 1.55mm-thick shower arm with flange can give you 6 inches more space and clearance to solve all your height & space needs in the shower..
  • EASY NO-TOOL INSTALLATION: Our universal shower head with fixed shower arm quickly connects to all Us plumbing within 5 mins. Also Included: Extra Teflon Tape and Additional Water Filter to help with fitting the moment it arrives.
  • EASY TO CLEAN NOZZLES: Our rustproof ABS plastic luxury Gold Shower Head comes with 90 Powered Easy to Clean Rubber Jets remove hard water deposits such as limescale to ensure you always feel the full force of this luxurious rain shower head. A low maintenance shower head for years to come.
  • THE SPARKPOD PROMISE: Your SparkPod Shower Arm is made with durable, top-quality materials. For us, "Happiness is a Long Shower.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • .../16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting installs in place of the straight fitting in the caliper to allow smoother, neater plumbing with less chance of kinking 90 Degree compression hose end 1/8" NPT Female to -3 Nylon hose..
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Azi 45pc Complete Home Washer Plumbing Repair Kit Assortment DIY and Professional Repairs – Plumbing Emergencies, Worn Out Washer Replacements

  • DURABLE RUBBER WASHERS - Azi Home Washer assortment comes with 90-pieces in various metric and inch standard sizes, with great options for lots of plumbing repair jobs and emergencies..
  • EXCELLENT ASSORTMENT – Most popular assortment needed for DIY or professional plumbing repairs. Includes variety of washers ranging from faucet washers, hose washers, drainage washer, slip join washers, o-rings, sink strainer washers and bibb screws..
  • REPAIR LEAKY FAUCETS - Replacing worn-out washers is an inexpensive alternative to replacing an entire faucet fixture. Worn out washers are main causes of most leaks!.
  • IDEAL FOR MOST REPAIRS - Easy kitchen faucets or bathroom sink repair with this assortment. Saving you money by saving water and expensive plumbing repairs..
  • TOOL SHOP ESSENTIAL: Great addition to any tool shop and tool kit to correct leaks and wastes around the house. A good set to have around, sooner or later you will have to change a washer or an aging hose spigot!.
Check Stock

FORMUFIT F012CRX-UV Cross PVC Fitting, Furniture Grade, 1/2\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration. 20% Deeper sockets than plumbing fittings..
  • WORKS WITH 1/2" SIZE PVC PIPE: Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0. 840"). Uses either off-the-shelf 1/2" Size pipe or FORMUFIT Furniture Grade PVC pipe..
  • MADE TO LAST, EVEN UNDER LIGHTS: UV resistant PVC material resists indirect sunlight and fluorescent lighting degradation. No yellowing, discoloration or cracking unlike sub-par PVC fittings.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock