Sidasu Pneumatic Jack 3 Ton Triple Bag Air Jack Extremely Fast Lifting Action 6600LBS Capacity Jack-Short Handle (White, Short Handle 3 Ton)
【PRODUCT ATTRIBUTES】Pneumatic Jack, capacity:6600LBS, height range: 5.71-16 inches, working pressure: 145Psi / 10Bar / 1.0Mpa, air inlet: G1/4, lifting time: 5 seconds, working temperature: -60 ℃~50℃..
【STURDY AND DURABLE】 The pneumatic jack is made of high-strength steel, and the whole uses anti-oxidation spray paint, and the matte baking paint prevents rust and corrosion, and is durable. The pallet is enlarged with rubber cushions, and the tractor is enlarged and thickened, and the lifting is firm and stable..
【WIDE APPLICATION】 The hand-type pneumatic jack has stable and powerful jacking and a wide range of applications. Suitable for a variety of models, such as family cars, small vans, SUV off-road vehicles and so on..
【NOTE】 When using the pneumatic jack, please do not exceed the limited tonnage. In order to prevent accidents, please use it with the safety bracket at the same time to ensure safe use. When in use, use it on a relatively horizontal and stable ground. Keep the contact part of the jack and the car within the range of 10-20mm outside the middle of the jack. When the airbag rises to the highest point, stop the air supply..
Sidasu Pneumatic Jack 3 Ton Triple Bag Air Jack Extremely Fast Lifting Action 6600LBS Capacity Jack-Short Handle (Red, Short Handle 3 Ton)
【PRODUCT ATTRIBUTES】Pneumatic Jack, capacity:6600LBS, height range: 5.71-16 inches, working pressure: 145Psi / 10Bar / 1.0Mpa, air inlet: G1/4, lifting time: 5 seconds, working temperature: -60 ℃~50℃..
【STURDY AND DURABLE】 The pneumatic jack is made of high-strength steel, and the whole uses anti-oxidation spray paint, and the matte baking paint prevents rust and corrosion, and is durable. The pallet is enlarged with rubber cushions, and the tractor is enlarged and thickened, and the lifting is firm and stable..
【WIDE APPLICATION】 The hand-type pneumatic jack has stable and powerful jacking and a wide range of applications. Suitable for a variety of models, such as family cars, small vans, SUV off-road vehicles and so on..
【NOTE】 When using the pneumatic jack, please do not exceed the limited tonnage. In order to prevent accidents, please use it with the safety bracket at the same time to ensure safe use. When in use, use it on a relatively horizontal and stable ground. Keep the contact part of the jack and the car within the range of 10-20mm outside the middle of the jack. When the airbag rises to the highest point, stop the air supply..
Build 19 Piece Pneumatic Kits with Technik Parts Contains Air Pump, Piston Pressure Rod, Cylinder,Pneumatic Hose &More,Great for DIY, MOC Tech, Compatible with Lego
Custom MOC Tech Accessories: The kit contains 10 pneumatic accessories for a total of 19 pieces. There are 2 2x11 V2 cylinders, 2 1x11 V2 cylinder air pumps, 2 1x5 cylinder V2 pressure rods, 2 1x6 air pumps, 2 pneumatic switches, 2 pneumatic spring air pumps, 2 7L atmospheric pistons, 2 square floor air pumps , a 2m long pneumatic hose with 4mm outer diameter, 2mm inner diameter and 2 push rods. Note: Tube color is random..
The technical parts are well sealed and airtight. The quality of the parts is comparable to the famous Danish building blocks..
The MOC small particle building block kit is used to realize the hydraulic action at night and control the turning, grabbing, lifting and other functions of cranes, trucks, various engineering vehicles, military trucks, airplanes, robots and other models..
We know that a perfect building block starts with the quality of the raw materials. The pneumatic kits are made of high-quality environmentally friendly ABS materials, and the building block parts are smooth and polished, so that each part fits well and has a smooth and comfortable grip, which is not easy to loosen. Compatible with other brands of small particle blocks..
Wright Products - Standard Duty Pneumatic Screen and Storm Door Closer with TAP N GO White
IMPROVE YOUR DOOR SAFETY: Wright Products standard-duty pneumatic (air pressure) door closer is designed for out-swinging light-to-medium weight full....
TAP-N-GO: TAP N GO technology allows you to hold open the door with a simple tap of a button press.
This standard-duty-use door closer has a high....
ADJUSTABLE: Based on your preference, you can also easily increase or decrease the closing speed and force with a screw at the end of the pneumatic....
READY TO INSTALL: All installation hardware is included, no additional parts need to be ordered or added. Comes with seasonal latching adjustment....
CLEAN SUBTLE LOOK: Pneumatic tube and attachments come in a high-quality finish to blend in perfectly with the door and frame.
【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..
Flexible Drill Extension Hex Shank Drill Nut Driver Bit Set, 2pcs Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, Screwdriver Bit Set, 105° Right Angle Drill Extension
Drill Extension Kit: Package included 2pcs bendable drill bit extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 10pcs screwdriver bit set, 1pcs 105° right angle drill extension, a complete match to meet daily needs..
Universal Socket Adapter Set: There are 3 pieces of socket adapters in different sizes, 1/4 inch, 3/8 inch, 1/2 inch, but they have the same size hex drill bit, which is 1/4 inch.
You can match them with your pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool..
Hex Shank Flexible Drill Extension: It come with a 105° right angle drill extension bit and a 11.7 in flexible extension bit.easy, lightweight, fast, connect to the standard hex screwdriver..
10pcs Screwdriver Bit Set: Screwdriver bit drill set is made of 45 steel, precision-ground, polished alloy steel, each piece under a rust-resistant satin finish with high hardness, very sturdy and durable to use..
Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills, manual screwdrivers and other hexagonal tools. A must-have package for conversion. Sufficient quantity and variety of tools to meet your various needs..
Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes (Blue,3/8 Inch Od)
What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
Different styles can suit different pneumatic piping needs.
Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
The sealing element has good sealing performance and is not easy to leak.
The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
These push to connect fittings are easy and convenient for you to operate.
Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes Black,1/4 Inch Od
What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
Different styles can suit different pneumatic piping needs.
Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
The sealing element has good sealing performance and is not easy to leak.
The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
These push to connect fittings are easy and convenient for you to operate.
Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.