Best Pneumatic Silencer

Campbell Hausfeld 2 Horsepower Air Compressor Pump with Flywheel (VT4823)

  • Pacakge included : 2 PCS 1/2"PT 20mm Air Compressor Silencer Filter.
  • Widely Used on admitting port of the air compressor can effectively block the dust in the air moisture to reduce the noise at work..
  • Silencer Filter can be used in noisy equipment, such as blowers, air compressors, boilers, exhaust port, generators, pumps and exhaust ports..
Check Stock

Switch Sound Dampeners Sheet Soft Landing Pads Dimple Foam Sponge (87 Layout)

  • ...e of the plastic keyboard and the cavity sound are eliminated..
  • 【Switch Sound Dampeners Sheet】This product is a Switch Sound Dampeners sheet, which is placed between the keyboard's circuit board (PCB) and the positioning board. It is a must for keyboard lovers to DIY your keyboard..
  • 【3mm Thickness】Most of the silencer pads are designed based on a standard 1.5mm positioning plate. Due to the processing accuracy of the plate, the space between the PCB and the positioning plate ranges from 3mm to 3.5mm. Regardless of whether the keyboard switch is welded or hot-plugged, the 3mm silencer pad is the best choice..
  • 【Warm Tips】This silencer pad is measured and drawn according to the keyboard entity. It is not produced by the original manufacturer and cannot be guaranteed to be fully fitted. Some of the holes, gaps, and circles may be caused by too many models and brands of the same configuration and different designs. The hole is deviated. Please check carefully before placing an order..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ,Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

Vbestlife Professional Tenor Trombone Silencer Trombone Mute Practice Silencer Sourdine Musical Instruments Accessory

  • [mellow sound]- This professional tenor trombone silencer would not effect the tone but give the trombone a mellow sound..
  • [Lightweight]- Lightweight and portable, the professional tenor trombone silencer is easy to use and carry..
  • [aluminium alloy]- Made of good quality aluminium alloy, strong and durable..
  • [reduce the volume]- The mute can effectively reduce the volume and allow you to practice without disturbing others..
  • [designed for trombone]- Perfect mute for music lovers, especially designed for trombone..
Check Stock

Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • integrated design, built-in noise reduction, external sound insulation.
  • after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Fantasy Flight Games Star Wars: X-Wing (2nd Edition) - TIE/vn Silencer Expansion Pack

  • A First Order ship expansion for X Wing: Second Edition.
  • Add a beautifully re sculpted TIE/vn silencer miniature to your First Order squadrons.
  • Contains six pilots ready to exterminate the Resistance, including the dreaded Kylo Ren.
  • Five upgrade cards invite you to customise your TIE/vn silencer to fit your strategy.
  • Two Quick Build cards provide predefined selections of pilots and upgrades to get you into the action right away.
Check Stock

QTY2 Polymat 797 High Temperature [160F] Spray Adhesive Vehicle Headliner Glue

  • 2 CANS: Industrial Grade HEADLINER AND FABRIC GLUE for high-temperature (160 degrees Farenheit), heavy-duty bonding of vinyl tops, headliners, and hood silencer pads..
  • Heavy duty glue, great for gluing a wide range of materials (headliners, carpeting, foams, paper, cardboard, felt , cloth) to metals, wood and hardboard..
  • Polymat 797 adhesive designed for bonding vinyl tops, heavy-weight headliners and hood silencer pads where high strength and heat resistance are needed..
  • Easily bonds heavier-weight materials to metals, woods, and plastics. [MADE IN USA].
Check Stock

Polymat 797 Hi Temp Spray Adhesive 20oz Can high temperature headliner glue 160F

  • Industrial Grade HEADLINER AND FABRIC GLUE for high-temperature (160F), heavy-duty bonding of vinyl tops, headliners, and hood silencer pads..
  • Heavy duty glue, great for gluing a wide range of materials (headliners, carpeting, foams, paper, cardboard, felt, cloth) to metals, wood and hardboard..
  • Polymat 797 adhesive designed for bonding vinyl tops, heavy-weight headliners and hood silencer pads where high strength and heat resistance are needed..
  • 1 CAN OF 797 POLYMAT HI-TEMP HEAVY DUTY TRIM ADHESIVE.
Check Stock

QTY2 Polymat 797 Hi-Temp Spray Adhesive Automotive Marine RV Upholstery Glue

  • Industrial Grade HEADLINER AND FABRIC GLUE for high-temperature (160F), heavy-duty bonding of vinyl tops, headliners, and hood silencer pads..
  • Heavy duty glue, great for gluing a wide range of materials (headliners, carpeting, foams, paper, cardboard, felt, cloth) to metals, wood and hardboard..
  • Polymat 797 adhesive designed for bonding vinyl tops, heavy-weight headliners and hood silencer pads where high strength and heat resistance are needed..
  • 1 CAN OF 797 POLYMAT HI-TEMP HEAVY DUTY TRIM ADHESIVE.
Check Stock