JoyTube 5 Packs Check Valve 1/8” 3MM One-Way PVDF Plastic Hose Barb for Fuel Gas Liquid Air
One way inline Check valve can connect with hose barb in both sides.
Barb hose check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa.
PVDF wear resistant check valve’s inside is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
Made of PVDF, sturdy, wear-resistant and durable for long service.
Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI
PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
TAC2-41P 2 Position 3 Way Toggle Valve, Air Pneumatic Knob, Air Control ON/OFF Toggle Valve, Metal for CNC Machine Industrial Use
【High Practicality】Each air toggle valve can control the air injection in the opposite direction, which is very practical..
【Small Size】The 2 position 3 way toggle valve has an ultra-small size, does not occupy machine space and saves space..
【Long Service Life】The toggle valve uses a high-quality sealing ring to ensure excellent air tightness and prolong service life..
【Scope of Application】The air pneumatic knob works without sparks and is suitable for special occasions that require high safety factors..
【Durable Material】The toggle valve is made of high-quality materials and is constructed with a sophisticated CNC machine tool, which has good quality and durability..
【working principle】Valve stays open when the coil is de-energized- and it closes when energized..
【SIze】Outlet Port：1/4"NPT；Inlet Port：1/4"NPT；Exhaust Port：1/8"NPT.We provide pneumatic fittings, which can be used by directly connecting 1/4 or 6mm air tubes..
【Quick response 】High-quality solenoid valve pilot head, sensitive response, response speed 4 times per second, stable performance..
FPPS 3 Ton (6000 lb) Capacity 48\ Ratcheting Off Road Utility Farm Jack with Lifting, Pulling, Clamping, Winching and Spreading
【PRODUCT ATTRIBUTES】Pneumatic Jack, capacity:6600LBS, height range: 5.71-16 inches, working pressure: 145Psi / 10Bar / 1.0Mpa, air inlet: G1/4, lifting time: 5 seconds, working temperature: -60 ℃～50℃..
【STURDY AND DURABLE】 The pneumatic jack is made of high-strength steel, and the whole uses anti-oxidation spray paint, and the matte baking paint prevents rust and corrosion, and is durable. The pallet is enlarged with rubber cushions, and the tractor is enlarged and thickened, and the lifting is firm and stable..
【WIDE APPLICATION】 The hand-type pneumatic jack has stable and powerful jacking and a wide range of applications. Suitable for a variety of models, such as family cars, small vans, SUV off-road vehicles and so on..
【NOTE】 When using the pneumatic jack, please do not exceed the limited tonnage. In order to prevent accidents, please use it with the safety bracket at the same time to ensure safe use. When in use, use it on a relatively horizontal and stable ground. Keep the contact part of the jack and the car within the range of 10-20mm outside the middle of the jack. When the airbag rises to the highest point, stop the air supply..
【working principle】Valve stays open when the coil is de-energized- and it closes when energized..
【SIze】Outlet Port：1/4"NPT；Inlet Port：1/4"NPT；Exhaust Port：1/8"NPT.We provide pneumatic fittings, which can be used by directly connecting 1/4 or 6mm air tubes..
【Quick response 】High-quality solenoid valve pilot head, sensitive response, response speed 4 times per second, stable performance..
Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces
Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
Note: when installing the check valve, pay special attention to the flow direction of the medium.
The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Craftsman N286039 Air Compressor Drain Valve Genuine Original Equipment Manufacturer (OEM) Part
Central Pneumatic Harbor Freight Air Compressor Head Gasket Kit with Stainless Steel valves..
This is a rebuild kit that contains 2 pieces of reed valves and 1 pieces of head gasket..
During installation, it is absolutely necessary to install/locate the lower valve with a little grease/vaseline. Failure to do so can cause the valve to break prematurely..
A brand-new, unused, unopened, undamaged item in its original packaging..
If your compressor looks like the photo, this kit will more than likely fit your machine..
