Best Po Film Extruder

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

Toothpaste Tube Squeezer Dispenser Multifunctional Tube Holder Rotate Plastic Squeezer Rollers Tube Manual Extruder Clip Seat Bathroom Toothpaste Rack for Facial Cleanser Cosmetics Oily Extruder

  • Wide range of uses: toothpaste extruder is suitable for toothpaste, facial cleanser, cosmetics and other pipe products.
  • Selected material: ABS material is used for toothpaste extruder, which is heat-resistant, easy to clean, and can be used at ease.
  • Refuse to waste: our toothpaste extruder can save up to 35% of toothpaste, which is usually wasted in toothpaste tubes and other tube products.
  • Exquisite design: beautiful shape, smooth lines, simple and generous overall, delicate handle, not easy to slip.
  • Easy to use: toothpaste or other pipe materials are inserted parallel to the mouth of the rotary rod, and then the rotary rod is inserted into the....
Check Stock

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

  • Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament..
  • Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament..
  • Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments..
  • Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant..
  • Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble..
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

teenage engineering Pocket Operator PO-33 KO Micro Sampler and Sequencer with Built-In Recording Microphone

  • PROVIDES 40 SECONDS OF SAMPLING MEMORY - The teenage engineering PO-33 has a built-in microphone for you to record 40-seconds of samples directly..
  • PLAYS YOUR SAMPLES CHROMATICALLY OR AS ONE-SHOTS - The 8 melodic slots let you play your own samples chromatically while the 8 drum banks play your sample as a one-shot..
  • ADDS PERCUSSION TO YOUR PERFORMANCE - The PO-33 is a 4-voice sampler. Its built-in micro drum machine allows you to layer more drum sounds over the sample recording..
  • ENHANCES YOUR SOUNDS - You can add a loop or stutter FX from the 16 onboard effects to create knockout samples..
  • SYNCS WITH MULTIPLE UNITS - You can connect PO-33 KO with 2 other Pocket Operators using standard stereo audio cables. You can also sync PO-33 with external devices like a PC..
Check Stock

RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support 3D Printer Controller Shield Board Module for Ramps 1.4 Reprap Prusa Mendel

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock

Play-Doh My Little Pony Rainbow Dash Style Salon Playset

  • Rainbow Dash Style Salon playset includes pony extruder that looks like Rainbow Dash.
  • Includes pony extruder, scissors, and 6 cans of Play-Doh modeling compound.
Check Stock

Clay Extruder - Polymer Clay Extruder Stainless Steel Clay Extruder Gun Alloy Rotary Mold Sugar Polymer Clay Extruder Craft Gun Cake Fondant Sculpture Decorating Tool Sculpting Tool

  • ♥【Multifunctional】The clay tool is multifunctional. You can not only use a manual extruder on the clay, but also use it to make cakes, bread....
  • ♥[Multiple styles] 1 clay extruder with 20 different disc accessories to meet different creative needs.
  • ♥[Excellent material] The spray gun parts of the clay extruder are made of stainless steel, which is strong and durable, not easy to damage, and has....
  • ♥【Humanity Design】Humanized design, non-slip, easier to squeeze. Our products can be broken down into three parts, easy to clean.
  • ♥【Unique Gift】This set of tools is an ideal helper for artists, bakers and craftsmen. As a nice holiday and birthday gift for them is a very....
Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock