Samsung SL30 Digital Camera USB Cable 5 USB Data Cable - 8 Pin - Replacement by General Brand
Support 48V active POE switch and active POE devices,Not Support passive POE switch and Passive PoE devices..
AI 250 meters Extend function，Automatically identify the transmission rate, automatically extend 100 meters or 250 meters according to the terminal....
The PoE Extender features one 10/100Mbps PoE input port and one 10/100Mbps PoE output port. Comply with IEEE802.3at and IEEE802.3af..
Designed for outdoor use. The PoE Extender includes watertight connectors on the input and output ends. IP66 rating for water resistant enclosure.....
Plug and Play, no other settings required. No external power required. Pin Assignment Input: Both 1/2, 3/6 and 4/5, 7/8, Output: 1/2 (-), 3/6 (+)..
TRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)
DEVICE INTERFACE: 8 x Gigabit PoE+ Ports.
4-Digit PoE LED display (total power budget, available power, consumption per port).
SMART SURVEILLANCE MANAGEMENT: These managed ONVIF switches are optimized for the surveillance industry.
surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device..
LONG RANGE POE+: Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps.
INTEGRATION FLEXIBILITY: Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration..
POE DEVICE ALIVE CHECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, provin....
120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output - for 5V Non-PoE Security Camera and Devices Like Foscam Sonoff Tablet USB Dropcam Raspberry Pi and Others
802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features....
5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x....
This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit....
Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning....
All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call....
LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4
COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Ubiquiti POE POE-24-12W-5P - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter 5-pack
Ubiquiti PoE POE-24-12W - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter (5-pack).
Ubiquiti Networks POE-24-12W is for use with airMAX and UniFi products. It's a replacement 12V, 12W PoE adapter, with remote hardware reset circuitry..
The POE-24 (24V, 12W) features earth grounding/ESD protection, power LED, and is available in USA (NEMA 5-15). Remote re-start capability is a key....
PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against....
The 24V, 0.5A models, POE-24-12W, are wall-mountable using the optional wall-mount brackets..
Tripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black
ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..
POE IP Camera, SV3C 4K 8MP POE Security Camera Outdoor Surveillance Cam with Motion Detection 98ft Infrared Night Vision Two-way Audio Metal shell, Support RTSP, SD Card, FTP, Onvif Conformant (Wired)
【4K Ultra HD Image & POE Camera】Want to watch ultra high-definition videos in real time? Or want to Power Over Ethernet? Try this SV3C 4K (8MP) POE IP camera! With maximum resolution 3840 * 2160, 3.6mm 8MP lens, 1/2.8 "SONY IMX415 CMOS, this POE IP camera can present ultra HD videos and pictures for you. As this is a POE IP camera, the camera can be powered over Ethernet, which means it is more convenient and can have a more stable network..
【Motion Detection & Timely Alert】: Want to have humanoid/vehicle/pet detection and alert? Try this POE Outdoor Camera! Smart motion detection makes the POE Outdoor camera relatively reduce false alarms! You can choose to identify only people, people and cars, or people and pets and Custom motion detection area and adjust motion detection sensitivity to reduce false alarms. If you turn on alarm linkage, it will remind you in time through CamHiPro APP or Email or FTP when detecting the motion..
【Infrared Night vision & 2-Way Audio】: This POE Security camera has 36 built-in infrared lights and supports 8MP infrared night vision. The night vision distance of the SV3C POE Security camera can reach up to 98 feet. And this POE Security camera has a built-in microphone and speaker, so it supports two-way audio.....
YuanLey 5 Port Gigabit PoE Switch with 4 Port PoE+ 1000Mbps, 802.3af/at 78W Built-in Power, Fanless Metal Unmanaged Plug & Play
[All Gigabit Ports] Includes 4 Gigabit POE ports, 1 Gigabit UpLink Ethernet port, all ports up to 100/1000Mbps speed, has excellent network performance..
[78W High PoE Power] Support IEEE 802.3af/at PoE power supply. The whole power is 78W, up to 30W per port. Suitable for poe power supply for multiple devices..
[Unmanaged Switch] All ports support PoE, and support automatic detection, can connect POE and non-POE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and Play, no configuration required, can be easy installed..
[Extend Function] When the extend mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety..
[Wide Applications] High Power, Built-in power supply. Compact design. Durable Metal. Bilateral heat dissipation. LED activity indicator lights. Can be widely used in security monitoring, computer networks, wireless coverage, office and home networks, etc.. Aslo we provide the best after-sale sevice, 100% Satisfaction..
ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play
1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..
